Page 2 - IMPORTANT INFORMATION REGARDING THIS MANUAL; CONVENTIONS; NC-400D PRINTER DRIVER for Windows
IMPORTANT INFORMATION REGARDING THIS MANUAL • Transfer or duplication of all or any part of the content of this manual without prior authorization from Fuji Photo Film Co. Ltd is forbidden by law. • The contents of this manual are subject to change without notice.• While every care has been taken in...
Page 3 - CONTENTS
CONTENTS 1. Exif Viewer............................................................................... 4 1.1 INSTALLING Exif Viewer .......................................................................... 6 1.2 USING Exif Viewer ........................................................................
Page 5 - Click the “Recording” tab.
2 Click the “Recording” tab. The “Enable CD Recording on this drive” checkbox should be ticked. Deselect this checkbox. ☞ CAUTION Deselecting this checkbox disables the function that allows you to write data to aCD-R or CD-RW disk.When you want to write data to a CD-R or CD-RW disk, tick this checkb...
Page 6 - INSTALLING Exif Viewer
1.1 1.1 INSTALLING Exif Viewer 1 Load the enclosed CD-ROM into the CD-ROM drive of theWindows PC that will use the printer. The installer windowautomatically appears. If the installer window does notappear, run the “SETUP.exe” program on the CD-ROM. 2 Click the [Installation of ExifViewer] button an...
Page 7 - USING Exif Viewer; -1 Launching Exif Viewer and an Exif Viewer Overview; “Exif Viewer”
1.2 1.2 USING Exif Viewer 1.2-1 Launching Exif Viewer and an Exif Viewer Overview 1 From the Windows Start menu, click “Programs (P)” ➔ “Exif Viewer” ➔ “Exif Viewer” to launch Exif Viewer. 2 When you select a folder in the left-hand pane, thumbnailsof the images in that folder are displayed in the r...
Page 8 - button in the top-right corner of the
3 When you double-click directly on one of the thumbnailimages in the right-hand pane, the full-size image isdisplayed in its own image window. To close the imagewindow, click the button in the top-right corner of the window. 4 To exit Exif Viewer, select “Exit (X)” from the “File (F)”menu or click ...
Page 9 - Image Window
1.2-2 Viewing Images 1 Selecting the folder Select the desired folder by clicking it in the folder tree display area in the Main Window. Theimages in that folder are then displayed.Clicking the to the left of the folder shows a drop-down display of the folders contained in the selected folder. 2 Dis...
Page 10 - Scrolling around the image display; Using the folder selection history; Registering a folder in the bookmarks
4 Scrolling around the image display You can use the scroll bars in the Image Window to scroll to different parts of the image.Also, by clicking the button in the Toolbar or selecting “Hand tool (H)” from the “Image (I)” menu, you can switch to the free scroll mode which allows you to move the image...
Page 11 - Bookmarks dialog box
■ Browsing the bookmarks Selecting a folder stored in the “Bookmarks (B)” menu displays the images in that folder. ■ Editing the bookmarks To edit the bookmarks, open the Bookmarks dialog box by selecting “Organize Bookmarks(O)” from the “Bookmarks (B)” menu. NC-400D PRINTER DRIVER for Windows ® USE...
Page 12 - Changing the Thumbnail Display Mode; To change the order in which thumbnail images are displayed; “Customize Window” dialog box
7 Changing the Thumbnail Display Mode ■ To change the order in which thumbnail images are displayed Select “Arrange Thumbnails (A)” from the “View (V)” menu or “Arrange Thumbnails” pop-up menu and specify one of the following as the thumbnail display order. By name, type, date ■ To change the thumbn...
Page 13 - Viewing the image information; Image information dialog box
8 Viewing the image information To view the image information, select a thumbnail and click the button or select “Information (I)” from the “File (F)” menu. The image information dialog box then appears. ☞ CAUTION • Because the Exif Viewer shows the shutter speed and aperture settings using the valu...
Page 14 - Viewing a slide show; Slide Show Setting dialog box; To end a slide show
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 14 9 Viewing a slide show When you select “Slide Show (S)” from the “File (F)” menu, the “Slide Show Setting” dialogbox opens and you can run a slide show. The slide show displays the image files in thethumbnail display area. Slide Show Setting dial...
Page 16 - Renaming image files; Automatic renaming; Deleting images; “Automatic Rename” dialog box
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 16 3 Renaming image files You can rename an image file simply by clicking in the file name display area and typing in anew file name. ■ Automatic renaming When you select the image to be renamed and select “Automatic Rename (A)” from the“File (F)” m...
Page 17 - Image window
1.2-4 Editing Images 1 Image window To edit an image, begin by opening the image you want to edit. You can open the image forediting by either double-clicking the thumbnail image directly or by selecting the thumbnail anddoing one of the following: A. Click the button. B. Select “Open (O)” from the ...
Page 18 - Rotating the image; “Image Size” dialog box
3 Copying the image to the clipboard By selecting “Copy (C)“ from the “Edit (E)“ menu, you can copy the selected section of theimage to the clipboard. 4 Changing the image size When you click the button in the Toolbar or select “Image Size (S)” from the “Image (I)” menu, the “Image Size” dialog box ...
Page 19 - Saving the image; Registering an image viewing application; “Save As” Dialog Box
6 Saving the image When you click the button or select “Save As (A)” from the “File (F)” menu, the “Save As” dialog box appears. Use this dialog box to specify the file format and destination folder beforesaving the image. ☞ CAUTION Exif Viewer can save the following file formats: Exif-JPEG, Exif-TI...
Page 20 - Page setup; Print dialog box
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 20 1.2-5 Printing the image 1 Page setup When you select “Page Setup (T)” from the “File (F)” menu, the standard “Page Setup” dialogbox appears. You can use this dialog box to specify parameters such as the paper size andorientation. 2 Printing When...
Page 22 - Printing an index; “Index Print” dialog box
3 Printing an index If you select several images and then select “Index Print (N)” from the “File (F)” menu, the“Index Print” dialog box opens. You can then use this dialog box to print an index of theimages. ✽ The “Print” dialog box displayed by the [Properties] button differs depending on the prin...
Page 24 - TROUBLESHOOTING; Problems with Exif Viewer; Message
1.3 1.3 TROUBLESHOOTING ■ Problems with Exif Viewer NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 24 Message Cause Solution Re-insert the disk. Use the ”Refresh” menu. Re-insert the disk. Use a file format supported by ExifViewer (Exif-JPEG, Exif-TIFF, JPEG(baseline only), BMP). To avoid overwr...
Page 27 - UNINSTALLING Exif Viewer; Quit all the currently running applications.
1.4 1.4 UNINSTALLING Exif Viewer 1 Quit all the currently running applications. 2 Close all the files. 3 Open the “My Computer” window and double-click“Add/Remove Programs” in the Control Panel. 4 The “Add/Remove Programs Properties” window appears.Select the software to be uninstalled (Exif Viewer)...
Page 28 - Automatic uninstallation begins.
5 When the confirmation message appears, click the [Yes]button. Check your selection carefully since the processcannot be cancelled once you click the [Yes] button. 6 Automatic uninstallation begins. When uninstallation ends, click the [OK] button. NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL ...
Page 30 - INSTALLING THE NC-400D PRINTER DRIVER; Quit all the applications currently running on Windows.
2.1 2.1 INSTALLING THE NC-400D PRINTER DRIVER ☞ CAUTION Do not use the Add Printer wizard in the Windows printer folder to install the printerdriver. The driver must be installed from the menus provided on the enclosed CD-ROM. 1 Quit all the applications currently running on Windows. 2 Check that th...
Page 35 - USING THE NC-400D PRINTER DRIVER; Set up the printer driver.
2.2 2.2 USING THE NC-400D PRINTER DRIVER ☞ CAUTION The NC-400D printer driver provides functions that allow you to use your printedimages in a variety of ways. Depending on the software application that is usingthe printer driver, enabling these function settings may result in printed imagesthat dif...
Page 36 - The NC-400D printer properties window appears.; Specify the “Paper” tab settings.
2 The NC-400D printer properties window appears. Specify the settings in the “Paper” and “Adjustment” tabs. ☞ CAUTION The number of tabs displayed in addition to “Paper” and “Adjustment” variesdepending on your PC hardware and software. 3 Specify the “Paper” tab settings. [Paper Size selection] The ...
Page 37 - Specify the “Adjustment” tab settings
☞ CAUTION If you are using a software application that allows you to select the paper size whenyou print, specify the NC-400D as the printer to be used, list the NC-400D papersizes and then select the paper size. If you are using the “Free Size” setting, right-click the NC-400D icon in the Printers ...
Page 39 - UNINSTALLING THE NC-400D PRINTER DRIVER; Switch off the PC and disconnect the NC-400D.
2.3 2.3 UNINSTALLING THE NC-400D PRINTER DRIVER 1 Switch off the PC and disconnect the NC-400D. 2 Switch your PC on. 3 Quit any application programs that are currently running. 4 Load the enclosed CD-ROM into the PC’s CD-ROM drive. 5 When the main menu appears, click the [Quit] button toexit the men...
Page 42 - Acrobat Reader AND PERUSAL OF; INSTALLING Acrobat Reader
3. Acrobat Reader AND PERUSAL OF MANUAL (USER'S MANUAL) To read the PDF-format user’s manual, Adobe Systems’ Acrobat Reader must be installedon the PC. If Acrobat Reader is already installed on the PC, you can omit the AcrobatReader installation. 3.1 3.1 INSTALLING Acrobat Reader 1 Load the enclosed...
Page 43 - READING THE USER’S MANUAL
3.2 3.2 READING THE USER’S MANUAL 1 Click the [Perusal of manual] button. 2 Acrobat Reader starts up and the “USER'S MANUAL”appears. NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 43
Page 45 - APPENDIX
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 45 APPENDIX BMP (bitmap) Standard format for image data in Windows. The file extension for bitmap files is “.bmp”. Exif A full-color image format for digital still cameras. This format is compatible with TIFFand JPEG and is supported by most image p...
