Fujifilm AF3-151E - Manual
Fujifilm AF3-151E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Lamp Type; Tungsten Lamps; Exposure Corrections*
- Page 3 – SPECIFICATIONS AND PACKAGING; Unprocessed Film; NOTE; Item
- Page 4 – ΣΣΣΣΣ; 0-2 Super Efficient Coupler Technology; 1-1 Replenishment Rate; Type Designation
- Page 5 – DIFFUSE RMS GRANULARITY VALUE; Chart Contrast; -2 Processing Solution Control; Same as those for SUPERIA 400.; PRINTER CONDITIONS
- Page 6 – NOTICE; The data herein published were derived from materials taken from; CHARACTERISTIC CURVES; Density; Exposure; Spectral Diffuse Density; Minimum Density
– 1 –
AF3-151E
C O L O R N E G A T I V E F I L M S
[CH]
(A)
1. FEATURES AND USES
FUJICOLOR SUPERIA X-TRA 400 [CH] is a daylight-
type ISO 400 color negative film that incorporates 4th
Color Layer and the newly developed Super Fine-
∑
(Sigma) Grain Technology to achieve high image qual-
ity when printed on FUJICOLOR papers.
•
Fine grain for a high-speed
film, providing no loss of
image quality even in
large-size enlargements
•
High sensitivity that allows
images to be captured
even under insufficient
light conditions
•
Vibrant and dynamic reds,
blues, and yellows
•
Violets and a variety of
greens with enhanced
fidelity
•
Smooth, beautiful and
naturally depicted skin
tones
•
Extremely sharp depiction
of all aspects of the
subject, from overall form
to textural details
•
Accurate color reproduc-
tion even under fluores-
cent lights
•
Precisely maintained gray
balance throughout, from
the brightest highlights to
the deepest shadows
•
Excellent Grain
Quality
•
High Speed and
Wide Exposure
Latitude
•
Vibrant,
Natural Color
Reproduction
•
Excellent
Skin Color
Reproduction
•
Excellent
Sharpness
•
Excellent Exposure
Suitability even
under Fluorescent
Lighting
•
Excellent Gray
Balance
Features
Results
2. SPEED
It requires no color-compensating filters when used
under daylight conditions or with an electronic flash.
Light Source
Speed
Filter
Daylight
ISO 400/27°
None
Tungsten Lamps
ISO 100/21°*
LBB-12**
(3200K)
(or Wratten No.80A)
* Indicates the effective speed resulting from designated filter use.
** Fuji Light Balancing Filter
3. EXPOSURE GUIDE
Use an exposure meter for exposure determination. If a
meter is not available, refer to the following table.
Daylight Exposure Guide Table
Light
Conditions
Lens
Aperture
Shutter
Speed (sec.)
Seashore
or Snow
Scenes
under
Bright
Sun
f/22
Bright
Sunlight
f/16
Hazy
Sunlight
f/16
Cloudy
Bright
f/11
Cloudy
Day or
Open
Shade
f/8
1/500
1/250
NOTES
•
The foregoing settings are for 2 hours after sunrise
and 2 hours before sunset.
•
Provide lens openings 1/2-stop smaller during the
summer and 1/2-stop larger during the winter.
•
Excessively bright (or dark) or backlighted subjects
may require plus or minus 1-stop lens opening ad-
justments.
Low Light Exposure Guide Table
Light
Conditions
Lens
Aperture
Shutter
Speed (sec.)
Fine
Weather
Daytime
Indoor
Scenes
f/2.8 to 4
1/60
Nighttime
Indoor
Scenes
(under
Fluorescent
Light)
f/2 to 2.8
1/30
Evening
Scenes
f/2.8 to 4
1/60
Night
Scenes
f/2 to 2.8
1/30
NOTE
Since light intensities for indoor and night scenes vary
widely from location to location, the data above
should be used only as a guide.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 [CH] 4. EXPOSURE UNDER VARIOUS LIGHT CONDITIONS Daylight Even when exposed under morning or evening twilightconditions or when color temperatures are low, no spe-cial filter use is needed as color balancing can be doneduring p...
– 3 – FUJICOLOR SUPERIA X-TRA 400 [CH] • FUJIFILM PRODUCT INFORMATION BULLETIN 7. FILM HANDLING • Expose film before the expiration date indicated onthe film package and process as soon as possibleafter exposure. • When loading and unloading roll film, avoid directsunlight. If there is no shade, tur...
– 4 – FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 [CH] 10. TECHNOLOGIES INCORPORATED IN NEW SUPERIA X-TRA 400 10-1 Super Fine- ΣΣΣΣΣ (Sigma) Grain Technology • By incorporating the Super Fine- Σ (Sigma) grain, a further advance over the Fine- Σ (Sigma) grain intro- duced in S...
