Frigidaire PCCE3680AF - Installation Manual
An installation manual for electric cooktops covers essential setup procedures, emphasizing safety and compliance with electrical standards. The guide details required clearances, cutout dimensions (for 30" and 36" models), and proper wiring–including grounding methods for both 3-wire and 4-wire configurations–to ensure safe integration into kitchens. It also addresses specific installation scenarios, such as countertop mounting, built-in oven placement, and ceramic-glass model requirements, while warning against hazards like fire risks from improper cabinet placement or electrical mishandling.
Table of Contents:
- Page 1 – Cooktop Installation Dimensions and Electrical Requirements
- Page 2 – Cooktop Installation Clearances and Cutout Measurements
- Page 3 – Electrical Connection and Serial Plate Location
- Page 4 – Wiring Power Cables to Junction Boxes
- Page 5 – Connecting Cooktop to Grounded Junction Boxes
- Page 6 – Setup for Ceramic-Glass Models
- Page 7 – Mounting Cooktops on Hard Countertops
- Page 8 – Mounting Above Built-in Ovens
- Page 9 – General Installation Guidelines and Certifications
- Page 10 – Minimum Clearances and Mounting Specifications
- Page 11 – Electrical Safety and Connection Standards
- Page 12 – Grounding Procedures and Wiring Configurations
- Page 13 – Power Supply Connection via Junction Box
- Page 14 – Glass-Ceramic Cooktop Installation Steps
- Page 15 – Installation into Rigid Countertops
- Page 16 – Installation Under Countertops and Oven Integration
1
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
A
F
B
C
D
E
All dimensions are in inches (cm).
Only some models are available in Canada.
* Allow 2" (5 cm) space below cooktop to clear the electric cable and allow for installation
of the junction box on the wall at the back of the cooktop.
P/N A01705002 (18/09) Rev. B
English – pages 1-8
Français – pages 9-16
Cooktop Dimensions
IMPORTANT INSTALLATION‑INFORMATION
• All electric cooktops run off a single phase, three-wire
or four-wire cable, 240/208 volt, 60 hertz, AC only
electrical supply with ground.
• Please note minimum distances between cooktop and
adjacent and overhead cabinetry is 30" (76.2cm).
* 30" (76.2 cm) min. for unprotected cabinet
24" (61 cm) min. for protected surface
Cooktop Cutout Dimensions
Figure 1
30" Min. *
(76.2 cm)
Printed in China
MODEL
A. LENGTH B. WIDTH
C. DEPTH
CUTOUT DIMENSIONS
F. DEPTH
BELOW
COOKTOP*
D. LENGTH
E. WIDTH
MIN.
MAX.
MIN.
MAX.
30"
30
5
/
8
"
(77.8 cm)
21
3
/
8
"
(54.4 cm)
2
5
/
8
"
(6.7 cm)
28½"
(72.4 cm)
29
7
/
8
"
(75.9 cm)
19
5
/
8
"
(49.9 cm)
20½"
(52.1 cm)
5"
(12.7 cm)
36"
36¾"
(93.5 cm)
21
3
/
8
"
(54.4 cm)
2
5
/
8
"
(6.7 cm)
33
7
/
8
"
(86.0 cm)
36
1
/
8
"
(91.8 cm)
19
1
/
8
"
(48.6 cm)
20½"
(52.1 cm)
5"
(12.7 cm)
INSTALLATION AND SERVICE MUST BE PERFORMED
BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING
FOR YOUR SAFETY: Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance.
Canada
United States
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Frigidaire
- Model
- PCCE3680AF
- Document type
- Installation Manual
- Language(s)
- English, French
- Pages
- 16
- File size
- 571.6 KB
- Format
Other Manuals for Frigidaire PCCE3680AF
Summary
Installation instructions and dimensional specifications for electric cooktops, including required clearances, electrical needs, and cutout dimensions for 30" and 36" models, emphasizing the need for a qualified installer.
Installation instructions detailing required clearances and cutout dimensions, including diagrams for overhead cabinets, countertop cutouts, clearance from combustible walls, and dimension tables for various model sizes, along with safety cautions.
Instructions for electric cooktop installation focusing on safety precautions, electrical connection requirements, wiring/grounding guidelines, handling armored cable, and locating the serial plate.