Frigidaire GMBS3068BD - Installation Manual

Frigidaire GMBS3068BD

A Installation Manual for built-in microwave trim kits used in Electrolux appliances covers essential setup procedures. The guide addresses safety precautions, required cabinet or wall cutout dimensions, and component placement to ensure proper integration into kitchen designs. It also includes electrical outlet positioning, exhaust duct assembly instructions, and notes on leveling, securing components, and maintaining clearance for ventilation.

1

2

3

4

5

Table of Contents:

Page 1 – Built-in Trim Kit Installation and Support
Page 2 – Built-in Microwave Installation Dimensions and Parts
Page 3 – Appliance Electrical Outlet and Exhaust Duct Installation
Page 4 – Microwave Oven Mounting and Exhaust Duct Assembly
Page 5 – Oven Frame Mounting and Leveling Procedure

Loading the manual

Installation Instructions

Installation
Instructions

Built-in Trim Kit

Model #

BEFORE YOU BEGIN

•

IMPORTANT

– Save these instructions

for local inspector's use.

•

IMPORTANT

– Observe all governing

codes and ordinaces.

•

Note to Installer

– Be sure to leave

these instructions with the Consumer.

•

Note to Consumer

– Keep these

instructions for future reference.

•

Skill level

- Installation of this appliance

requires basic mechanical and electrical

skills.

Read these instructions completely and carefully.

•

Proper installation is the responsibility of the

installer.

•

Product failure due to improper installation is

not covered under the Warranty.

•

Unplug the microwave oven before

attempting installation of this kit.

•

Because the kit includes metal parts, caution

should be used in handling and installation to

avoid the possibility of injury.

•

Do not remove permanently affixed labels,

warnings, or plates from the product. This

may void the warranty.

FOR YOUR SAFETY:

WARNING

– Before beginning the installation,

switch power off at service panel and lock out

When the service

cannot be locked, securely fasten

a prominent warning device, such as a tag, to

the service panel.

IMPORTANT - PLEASE READ
AND FOLLOW

THIS BUILT-IN KIT IS DESIGNED FOR USE
ONLY WITH ELECTROLUX MICROWAVE
OVENS SPECIFYING BUILT-IN KIT

QUESTIONS?

For customers in the United States call:1-800-944-9044

For customers in Canada call: 1-800-265-8352 (English)
1-800-668-4606 ext.8199 (French)
Visit our Website at:

www.frigidaire.com

READ CAREFULLY.

KEEP THESE INSTRUCTIONS.

PN:

EN-1

A06823528

September 2021

to prevent being switched on accidentally.

GMTK3068AF GMTK2768AF GMTK3068AD
GMTK2768AD

Please make sure the cabinet is level orvertical

to front panel of cabinet before installation.

Uneven cabinets may cause the trim kits to be

noncoplanar with the door panels of microwave

oven.

•

PN:16170000A87093

A statement shall be included in the instructions

warning the user that the appliance must be

disconnected from the source of supply before

attempting the installation of the accessory, and

that the accessory is intended for use only with

an appliance that is marked to indicate such use.

•

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Frigidaire
Model: GMBS3068BD
Document type: Installation Manual
Language(s): English
Pages: 5
File size: 1.8 MB
Format: PDF

Other Manuals for Frigidaire GMBS3068BD

Summary

Page 1 - Built-in Trim Kit Installation and Support

Installation instructions for the Built-in Trim Kit for Electrolux microwave ovens, including safety warnings, prerequisites, and support contact information.

Page 2 - Built-in Microwave Installation Dimensions and Parts

Instructions detailing parts included, location selection, required cabinet or wall cutout dimensions, trim kit dimensions, and installation clearance requirements illustrated.

Page 3 - Appliance Electrical Outlet and Exhaust Duct Installation

Installation instructions for electrical outlet placement, exhaust duct assembly, correct outlet location diagrams, and notes on floor construction, leveling, and securing components.

Ask a question