Frigidaire FRTE1622AB - Installation Manual
Frigidaire FRTE1622AB – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Ice Maker Installation Instructions; WARNING
- Page 5 – Connecting Ice Maker to Water Supply; Before Installing The Water Supply Line, You Will Need:; NOTE; Smart Choice; To Avoid Property Damage:; IMPORTANT
- Page 6 – To Connect Water Supply Line To Ice Maker Inlet Valve
AUTOMATIC ICE MAKER
INSTALLATION INSTRUCTIONS
P/N: A28077001
WARNING
• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
• Connect the ice maker to a potable water supply only.
An authorized service technician is recommended to install the ice maker kit.
Tools Needed:
• Electric drill with
¼
” bit
• Adjustable wrench
• Putty knife
• Knife Gloves
• Needle nose pliers or nut driver
• Flat head screw driver
• Phillips or Quadrex driver
NSF/ANSI/CAN 61: Q
≤
1
Ice Maker (IM1900) Kit Components
A
B
C
D
E
F
G
H
I
J
K
L
Part Description
Qty.
A
Ice Maker
1
B
Ice Storage Bin
1
C
Water Valve
1
D
Plastic Water Supply Tubing
1
E
Mounting Box
1
F
Box Cover
1
G
Tube Clamp
1
H
Leveling Bracket Screw
1
I
Ice Maker Mounting Screws
2
J
Self-tapping Screws
3
K
Plastic Clamps
3
L
Water Inlet Tube
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Frigidaire FRTE1622AB
Summary
2 Ice Maker Installation Instructions 1. Remove the plug from the inside of the freezer compartment with a putty knife. WARNING Unplug the refrigerator from the electrical outlet. Remove the glass freezer shelf and Ice tray before you begin. 2. Remove the label covering the ice maker hole on the bac...
5 Connecting Ice Maker to Water Supply Before Installing The Water Supply Line, You Will Need: • Basic Tools: adjustable wrench, flat blade screwdriver, and Phillips screwdriver • Access to a household cold water line with water pressure between 30 and 100 psi. • A water supply line preferably made ...
6 Connecting Ice Maker to Water Supply To Connect Water Supply Line To Ice Maker Inlet Valve 1. Disconnect refrigerator from an electrical power source. 2. Place the end of water supply line into the sink or a bucket. Turn ON the water supply and flush the supply line until the water is clear. Turn ...
