Frigidaire FFHT1822UB - Installation Manual

An Installation Manual for automatic refrigerator ice makers covers essential setup procedures, including electrical safety precautions, required tools, and detailed component assembly. The guide emphasizes proper wiring, water supply connections (using copper or stainless steel tubing), and structural adjustments like securing foam pads and positioning the ice bin. Safety warnings and diagrams illustrate critical steps to ensure correct installation and functionality.

Page 1 – Installation Components and Electrical Safety
Page 2 – Ice Maker Physical Installation Steps
Page 3 – Fill Tube and Cover Assembly
Page 4 – Ice Bin and Water Line Installation
Page 5 – Access Cover Reinstallation and Water Supply Connection
Page 6 – Water Supply Tubing Connections
Page 7 – Ice Maker Operation and Maintenance

Loading the manual

AUTOMATIC ICE MAKER

INSTALLATION INSTRUCTIONS

P/N: A23224101

WARNING

• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator

from electrical power before connecting a water supply line to the refrigerator.

• Connect the ice maker to a potable water supply only.

An authorized service technician is recommended to install the ice maker kit.

Ice Maker (IMKTTM0018) Kit Components

5304520536

Ice Maker

QTY: 1

5304525288

Shoulder Screw

QTY: 5

5304520538/5304520539

Cover with Door

QTY: 1

5304520535

Ice Bin

QTY: 1

Parts needed for install inside the unit

Tools Needed:

• Flat head screw driver

• Phillips or Quadrex driver

• ¼

" Hex driver

• Gloves

• Drill

• Needle nose pliers

Parts needed for install on back side of the unit



NOTE

Check with your local building authority for recommendations on water lines and associated materials prior

to installing your new refrigerator. For household water line hookup from the home water supply system to

the unit, we recommend for homes with existing valves

Smart Choice®

water line kit 5304437642 (with a 6'

Stainless Steel Water Line) and for homes without an existing valve, we recommend

Smart Choice®

water

line kit 5304493869 (with a 6' Polyline Waterline). Please refer to Frigidaire.com for more information.

5304520540

Water Valve

QTY: 1

218976923

Tube

QTY: 1

241500304

#8 screw

QTY: 2

5304455846

Clamp

QTY: 1

5303001193

Clamp

QTY: 1

A22628901

Fill Tube

QTY: 1

A23297701

Screw

QTY: 2

A23221901

Foam Pad

QTY: 1

A23222001

Foam

Rectangle

QTY: 1

Fill Tube Kit

A23489801/2107000021

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Frigidaire
Model: FFHT1822UB
Document type: Installation Manual
Language(s): English
Pages: 7
File size: 3.3 MB
Format: PDF

Other Manuals for Frigidaire FFHT1822UB

Summary

Page 1 - Installation Components and Electrical Safety

Instructions for installing the automatic ice maker, including electrical safety warnings, recommended tools, and a list of kit components with part numbers and quantities.

Page 2 - Ice Maker Physical Installation Steps

Step-by-step procedure for installing the ice maker, involving removing the freezer shelf, accessing water inlet/electrical cover, installing shoulder screws, wiring connections, plugging in the unit, and final placement.

Page 3 - Fill Tube and Cover Assembly

Instructions for attaching foam pads to the fill tube, securing the fill tube to the refrigerator, positioning the water tube in the ice maker channel, and mounting the ice maker cover.