Frigidaire FDE336RES2 - Installation Manual

An Installation Manual for gas and electric dryers covers essential setup requirements, from electrical and gas specifications to exhaust system design and safety protocols. The document emphasizes proper ventilation, including duct sizing, vent direction, and clearance dimensions to prevent fire hazards or poor airflow. It also addresses specific installation challenges–such as mobile homes, under-counter units, and console models–while detailing grounding, wiring configurations (including 3-wire/4-wire systems), and compliance with regional standards for both electric and gas appliances. Safety warnings about lint buildup, combustible materials, and proper venting are central to the guidance.

Page 1 – Installation Overview and Requirements
Page 2 – Pre-installation Safety and Electrical Specifications
Page 3 – Exhaust System Sizing and Gas Line Requirements
Page 4 – Physical Installation Clearance Rules
Page 5 – Mobile Home Dryer Installation
Page 6 – Top Console Dryer Installation Details
Page 7 – Electrical Grounding and Safety Requirements
Page 8 – Non-Canadian Electric Wiring Procedures
Page 9 – Gas Dryer Connection and Servicing

Loading the manual

Installation

Instructions

Gas & Electric

Dryer

Before beginning

installation,

carefully

read these instructions.

This will simplify the installation

and ensure the dryer

is installed correctly and safely. Leave these instructions

near the Dryer after installation

for future

reference.

NOTE: The electrical service to the Dryer must conform

with local codes and ordinances and the latest edition

of the

National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.

NOTE: The gas service to the

Dryer must

conform

with

local codes and ordinances

and the

latest edition

of the

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

NOTE: The Dryer is designed under ANSI Z 21.5.1

or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only.

This Dryer is not recommended

for commercial

applications

such as restaurants

or beauty salons, etc.

For your safety

the information

this manual must be followed

to minimize

the risk

of fire or explosion

or to prevent property

damage,

personal

injury or loss of life.

- Do not store or use gasoline

or other flammable

vapors and liquid in the vicinity of this or any other
appliance.

- WHATTO

DO IFYOU

SMELL

GAS

• Do not try to light any appliance.
• Do not touch any electrical

switch; do not use

any phone in your building.

• Clear the room, building or area of all

occupants.

• Immediately

call your gas supplier

from a

neighbor's

phone.

Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier,

call the

fire department.

Installation

and service

must

be performed

by a

qualified

installer,

service

agency

or the

gas

supplier.

Contents

SUBJECT

Prednstallation Requirements
Electrical Requirements
Exhaust System Requirements

Gas Supply Requirements

Location of Your Dryer
Mobile Home Installation

Rough-In Dimensions
Unpacking
Reversing Door Swing
Electrical Installation

Grounding Requirements

Electrical Connections--3-wire
Electrical Connections--4-wire
Installation

Replacement Parts

PAGE

2
2

2-3

3
4

5-6

6
7
7

8
8
9

Printed in U.S.A.

P/N 131751700 (9806)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Frigidaire
Model: FDE336RES2
Document type: Installation Manual
Language(s): English
Pages: 9
File size: 656.5 KB
Format: PDF

Summary

Page 1 - Installation Overview and Requirements

Table of contents detailing electrical and gas requirements, installation steps, and replacement parts for dryers.

Page 2 - Pre-installation Safety and Electrical Specifications

Requirements for tools, electrical specifications for electric and gas models, power supply cord details, and exhaust system safety regarding lint buildup and combustible materials.

Page 3 - Exhaust System Sizing and Gas Line Requirements

Guidelines for sizing exhaust systems based on duct type and turns, diagrams for installation, exhaust direction, duct locating dimensions, and gas pipe material and sizing requirements.