Friedrich Breeze - Manual
Friedrich Breeze – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Before getting started; You cannot; Placing the indoor unit; can impede airflow to the module.; DO NOT PLUG IN INDOOR UNIT until you have; What’s in the carton?
- Page 3 – There are two options available:; CAUTION
- Page 4 – STEP 2 – Hang wall mount bracket; : This should only be done by qualified install
- Page 5 – STEP 4 - Line set installation; ) DO NOT bend tubing in a radius smaller than 6”; window installation); STEP 5 - Hang the indoor module on the wall bracket.; the connecting line form in the SimpleSillTM.
- Page 6 – DO NOT cut or kink the connecting line!; STEP 8 – Connect the electrical connector from the connecting; Accessories List) to close the access door.
- Page 8 – Remote Control Operation
Installation Instructions
for BR1224W3A
12000 - 24000 Btu
Breeze
™
A revolution in room cooling
Friedrich Part No. 96091001
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Before getting started Identify the locations where you will mount the indoor module and place the outdoor module. Keep in mind, there is 25’ of connection line for connecting indoor and outdoor pieces, so locate them accordingly. You cannot add additional length if they are too far apart. Placing t...
STEP 1 - Determine how you will connect the indoor and outdoor modules. There are two options available: OPTION 1 is to drill a 3” hole through the wall to pass the connecting line through. OPTION 2 is to use the Friedrich SimpleSill™ kit to pass the connecting pipe through the window. The Simple- S...
Level STEP 2 – Hang wall mount bracket Using the paper template as a guide, locate two studs behind screw hole locations in the template. It is preferable to mount the hanging plate on studs. If two studs are not available, utilize anchors appropriate for the wall type with a combined weight capacit...
