Friedrich P10S - Manual - manualsarea.com

Page 2 - IMPORTANT; IMPORTANT SAFETY GUIDELINES

IMPORTANT Do not install and use your portable air conditioner unit before carefully reading this instruction guide. Please retain this manual brochure for product warranty and future reference IMPORTANT SAFETY GUIDELINES 2 CAUTION Operate this unit in an ambient of 89 ° F or less. The heating funct...

Page 3 - INTRODUCTION; Congratulations on your purchase and welcome to Friedrich!

INTRODUCTION Congratulations on your purchase and welcome to Friedrich! ZoneAire Compact: PORTABLE AIR CONDITIONER The Air Conditioner has been designed and manufactured to the highest standards of modern engineering. Our product not only provides you a remote control to help user operate all the fu...

Page 4 - UNPACKING INSTRUCTIONS & CONTENTS; UNPACKING INSTRUCTIONS; CONTENTS

UNPACKING INSTRUCTIONS & CONTENTS UNPACKING INSTRUCTIONS 1. Place the unit in the correct upright position before unpacking. 2. Cut the two packing straps. 3. Slide the carton in an upward motion and it will release from the base. 4. Grip the carry handles located on either sides of the unit and...

Page 5 - PARTS

PARTS 1. Control panel 2. Remote control receiver 3. Hot air-outlet 4. Evaporator’s filter 5. Cool air-inlet 6. Air-outlet’s joint part 7. Cool air-outlet 8. Condenser’ s filter 9. Hot air-inlet 10. Drain hole 5

Page 6 - DISPLAY FUNCTIONS

DISPLAY FUNCTIONS KEY Press to turn unit "ON" or "OFF". 2. MODE Press this key to select cooling, heating, or dehumidifying. 3. TEMPERATURE REGULATION KEY (UP) - During cooling function ： This key raises the preset temperature by 1°F each time it is pressed and the maximum limit is 8...

Page 8 - MAINTENANCE AND CLEANING

MAINTENANCE AND CLEANING 8. SLEEP CONTROL FUNCTION 1. While in cooling mode, press the SLEEP key to set the temperature. It increases 2°F after an hour and at most increases 4°F after 2 hours. 2. While in heating mode, press the SLEEP key to set the temperature. It decreases 2°F after hour and at mo...

Page 9 - REMOTE CONTROL FUNCTIONS

9 REMOTE CONTROL FUNCTIONS Instruction for the operating keys: When a remote control signal is transmitted, a transmission icon on the display flashes once, indicating the signal has been transmitted.

Page 12 - DRAIN PIPE; NOTICE

DRAIN PIPE NOTICE This unit can evaporate the condensation and distribute through the exhaust hose automatically. 1. The drain pipe doesn’t have to be installed, when the unit is in cool mode. Please make sure that the rubber cap is locked on drain hole, when the unit is running. 2. When operating t...

Page 13 - MAINTENANCE

MAINTENANCE AND CLEANING MAINTENANCE PLEASE DISCONNECT THE POWER CORD BEFORE CLEANING. AIR FILTER The air filter located on the left hand side of the unit can be removed simply by pulling the frame up. Clean the air filter with a vacuum cleaner ensuring all dust is removed. CONDENSER/EVAPORATOR Use ...

Page 14 - INSTALLATION; PLACE FOR USE

INSTALLATION PLACE FOR USE 1. Because the machine distributes hot air, please don’t place or operate in a narrow place.2. Do not work the machine in a humid place.3. Don’ t place the machine in a sunlit corner otherwise the unit might shut down due to the overheat and the color of the machine may so...

Page 15 - WINDOW KIT

INSTALLATION WINDOW KIT INSTALL 1. Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.1 & Fig.1a. How to enjoy heating function? 1. For heating function: remove the exhaust hose from the unit, as shown in "Fig.01“.2. As shown in "Fig.02“, slide the ...

Page 16 - TROUBLESHOOTING; TROUBLE SHOOTING

TROUBLESHOOTING Error Code Cause Troubleshooting E1 Electrical short on both temperature sensor and PCB Contact an electrician for repair E2 Electrical short of temperature sensor copper tube and PCB wiring Contact an electrician for repair E4 Indicates water tank full or poor contact of signal plug...

Friedrich P10S - Manual

Table of Contents:

Summary

Other Friedrich Models