Fortinet 124dpoe - Manual

66 Basic Connections 1 Connect your device to a power outlet and an Internet connection. This is usually a modem, but could also be another device on your network. Power Connection Ethernet Port Internet

7 Setup Options 2 Web Browser Setup Wizard (p.7) A B Terminal Emulation With console cable (p.8) MGMT Port https:// Web Browser with Ethernet cable A To Connect to the GUI 1. Connect an Ethernet cable . 2. Configure the management computer to be on the same subnet as the internal interface as the Fo...

88 To Connect to the CLI 1. Connect the device’s console port to the management computer using the provided console cable . 2. Start a terminal emulation program on the management computer, select the COM port , and use the following settings: Baud Rate: 115200 Data bits: 8 Parity: None Stop bits: 1...

10 10 To install the FortiSwitch unit into a rack 1. Ensure that the FortiSwitch unit is placed on a stable surface prior to rack-mount installation. 2. Attach the provided rack-mount brackets to the sides of the unit using the provided bracket screws . 3. Position the FortiSwitch unit in the rack ....

11 4. Line up the rack-mount bracket holes to the holes on the rack and ensure that the FortiSwitch unit is level . 5. Finger tighten four rack-mount screws to attach the unit to the rack . 6. Verify that the spacing around the FortiSwitch unit conforms to requirements and that the unit is level , t...

12 12 To install the SFP transceivers 1. Ensure that you are properly grounded.2. Remove the caps from the SFP cage sockets on the front panel of the unit. 3. Position the SFP transceiver in front of the cage socket opening and ensure that the transceiver is correctly oriented. When the transceiver ...

13 5. Press the transceiver firmly into the cage socket with your thumb. 6. Verify that the transceiver is latched correctly by grasping the sides of the transceiver and trying to pull it out without lowering the extraction lever . If the transceiver cannot be removed, it is installed and latched co...

15 Device Guide MGMT SFP Ports Green: Connected at 1Gbps Flashing Green: Transmitting & receiving data Off: No link established Ethernet Ports Link/Activity Green: Connected Flashing Green: Transmitting & receiving data Off: No link established Ethernet Ports Speed Green: Connected at 1Gbps ...

Fortinet .com Fortinet Customer Service & Support Create a support account, register and manage your products, download updates, firmware images and release notes, and create technical support tickets. https://support.fortinet.com Fortinet Document Library Up-to-date versions of Fortinet publica...