Fortinet 124dpoe - Manuals - manualsarea.com

Page 3 - QuickStart Guide; Register for Support

QuickStart Guide Register for Support Register your Fortinet product to receive: • Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique• Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menac...

Page 4 - Box Includes

Box Includes 44 Power Cable Console Cable 4 Rubber Feet 2 Rack-Mount Brackets 8 Bracket Screws FortiSwitch 124D-POE QuickStart Guide QuickStart Guide FortiSwitch 124D-POE

Page 5 - Before You Begin; DSL PPPoE; QuickStart Guide Video

Before You Begin Write down details that you may need from your network administrator or ISP. 5 DSL PPPoE Username Password Cable Modem DHCP It is normal to not require a hostname, but your ISP may require it. Hostname Static IP address IP Address Subnet Mask Default Gateway Primary/Secondary DNS Qu...

Page 6 - Basic Connections

66 Basic Connections 1 Connect your device to a power outlet and an Internet connection. This is usually a modem, but could also be another device on your network. Power Connection Ethernet Port Internet

Page 7 - Setup Options; Web Browser; Web Browser with Ethernet cable; To Connect to the GUI

7 Setup Options 2 Web Browser Setup Wizard (p.7) A B Terminal Emulation With console cable (p.8) MGMT Port https:// Web Browser with Ethernet cable A To Connect to the GUI 1. Connect an Ethernet cable . 2. Configure the management computer to be on the same subnet as the internal interface as the Fo...

Page 8 - To Connect to the CLI

88 To Connect to the CLI 1. Connect the device’s console port to the management computer using the provided console cable . 2. Start a terminal emulation program on the management computer, select the COM port , and use the following settings: Baud Rate: 115200 Data bits: 8 Parity: None Stop bits: 1...

Page 10 - To install the FortiSwitch unit into a rack; Installation

10 10 To install the FortiSwitch unit into a rack 1. Ensure that the FortiSwitch unit is placed on a stable surface prior to rack-mount installation. 2. Attach the provided rack-mount brackets to the sides of the unit using the provided bracket screws . 3. Position the FortiSwitch unit in the rack ....

Page 11 - To install the unit on a flat surface

11 4. Line up the rack-mount bracket holes to the holes on the rack and ensure that the FortiSwitch unit is level . 5. Finger tighten four rack-mount screws to attach the unit to the rack . 6. Verify that the spacing around the FortiSwitch unit conforms to requirements and that the unit is level , t...

Page 12 - To install the SFP transceivers; SFP Transceivers

12 12 To install the SFP transceivers 1. Ensure that you are properly grounded.2. Remove the caps from the SFP cage sockets on the front panel of the unit. 3. Position the SFP transceiver in front of the cage socket opening and ensure that the transceiver is correctly oriented. When the transceiver ...

Page 13 - To remove the SFP transceivers

13 5. Press the transceiver firmly into the cage socket with your thumb. 6. Verify that the transceiver is latched correctly by grasping the sides of the transceiver and trying to pull it out without lowering the extraction lever . If the transceiver cannot be removed, it is installed and latched co...

Page 15 - Device Guide

15 Device Guide MGMT SFP Ports Green: Connected at 1Gbps Flashing Green: Transmitting & receiving data Off: No link established Ethernet Ports Link/Activity Green: Connected Flashing Green: Transmitting & receiving data Off: No link established Ethernet Ports Speed Green: Connected at 1Gbps ...

Page 24 - Fortinet; Fortinet Customer Service & Support

Fortinet .com Fortinet Customer Service & Support Create a support account, register and manage your products, download updates, firmware images and release notes, and create technical support tickets. https://support.fortinet.com Fortinet Document Library Up-to-date versions of Fortinet publica...