Ford FCS-14265-05 - Manual
Ford FCS-14265-05 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FOREWORD; of the high voltage electrical system.; ALWAYS ASSUME THE VEHICLE’S
- Page 3 – ESCAPE HYBRID OR MARINER HYBRID VEHICLE IDENTIFICATION; or Mariner Hybrid vehicle.
- Page 5 – DESIGN FEATURES
- Page 6 – ESCAPE HYBRID OR MARINER HYBRID COMPONENTS IDENTIFICATION; vehicle component location graphic on the following page.
- Page 8 – included in the high voltage system.; HIGH VOLTAGE BATTERIES; The High Voltage battery is located in the rear of the vehicle,
- Page 9 – APPROACHING A DAMAGED HIGH VOLTAGE VEHICLE; FOLLOW EXISTING TRAINING AND INCIDENT COMMANDER DIRECTION
- Page 11 – SPECIAL NOTES; orange cables. Treat severed lines as if they contain high voltage.; IF THE HIGH VOLTAGE BATTERY CASE HAS BEEN RUPTURED; Follow guidelines in the Wrecker Tow Manual.; SPECIAL NOTE TO SALVAGE YARDS; battery must be disposed of properly.
2006/2007
ESCAPE HYBRID
OR MARINER HYBRID
EMERGENCY RESPONSE GUIDE
FCS-14265-05
1
2006/07 E s c a p e Hybrid, Mariner Hybrid E m e r g e n c y R e s p o n s e Guide, 08/2006
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FOREWORD Escape Hybrid or Mariner Hybrid emergency response procedures are similar to those for a traditional gasoline powered vehicle with the exception of the high voltage electrical system. The Escape Hybrid or Mariner Hybrid vehicle uses a conventional gasoline engine in addition to an electric ...
ESCAPE HYBRID OR MARINER HYBRID VEHICLE IDENTIFICATION • A unique Hybrid label is located on the lift gate, the front driver's door, and the front passenger's door. This can be used to identify an Escape Hybrid or Mariner Hybrid vehicle. • The Escape Hybrid or Mariner Hybrid also has a unique left r...
DESIGN FEATURES The following list indicates some of the features that have been designed to disconnect high voltage in the event of an accident. • Inertia switches are designed to disconnect high voltage and fuel in the event of an accident. There are two inertia switches - both front and rear. If ...
