Ford 2014 Taurus v.1- User Manual

For U.S. only (if equipped), if you choose to use the SYNC® VehicleHealth Report, you consent that certain diagnostic information may alsobe accessed electronically by Ford Motor Company and Ford authorizedservice facilities, and that the diagnostic information may be used for anypurpose. See the SY...

information without obtaining consent, unless pursuant to courtorder or where required by law enforcement, other governmentauthorities or other third parties acting with lawful authority.Other parties may seek to access the information independentlyof Ford Motor Company and Ford of Canada. Note: Inc...

PERCHLORATE MATERIAL Note: Certain components in your vehicle, such as airbag modules, safety belt pretensioners, and remote control batteries, may containperchlorate material. Special handling may apply for service or vehicleend of life disposal. See www.dtsc.ca.gov/hazardouswaste/perchlorate formo...

Warranty on Replacement Parts Genuine Ford and Motorcraft replacement parts are the onlyreplacement parts that benefit from a Ford Warranty. Damage caused toyour vehicle as a result of the failure of non-Ford parts may not becovered by the Ford Warranty. For additional information, see the termsand ...

WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend against the use of ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, orage Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four oryounger). Use a child safety seat(sometimes called aninfant carrier,convertible seat, ortoddler seat). Smallc...

CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move thevehicle seat upon which the child seat is installed all the way back.When poss...

WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. WARNING: To avoid risk of injury, do not leave children or pets unattende...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

• Keep the buckle release button pointing up and away from the safetyseat, with the tongue between the child seat and the release button,to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed inthe upright position. • Put the safety belt in the automat...

3. While holding the shoulderand lap belt portions together,route the tongue through the childseat according to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingf...

Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injuryor death. WARNING: Depending on where you secure a chil...

The LATCH anchors are located atthe rear section of the rear seatbetween the cushion and seat backbelow the symbols as shown. Followthe child seat manufacturer’sinstructions to properly install achild seat with LATCH attachments. Follow the instructions on attaching child safety seats with tether st...

CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door andmust be set separately for each door. When these locks are set, the reardoors cannot be opened from theinside. • Insert the key and turn to thelock position (key horizontal) toengage the childproof locks. • Ins...

PRINCIPLES OF OPERATION WARNING: Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash. WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in ...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a ch...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety beltand increase the risk of injury in a crash. Adjust the height of the...

5. Within about seven seconds of the light turning off, buckle thenunbuckle the safety belt. The safety belt warning light will blink. • This will disable the Belt-Minder feature for that seating position if itis currently enabled. • This will enable the Belt-Minder feature for that seating position...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even wh...

WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The airbags are a supplemental restraint system and are designed towork with the safety belts to h...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching thepedals comfortably. • Recline the seat slightly (one or two degrees) from the uprightposition. After all occupants have adjusted their seats and put on safety belts, it isvery i...

FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injuryor death. WARNING: Sitting improperly out of position or with the seat back...

The front passenger sensing systemuses a passenger airbag statusindicator which will illuminateindicating that the front passengerfrontal airbag is either ON (enabled)or OFF (disabled). The indicatorlamp is located in the center stack ofthe instrument panel. Note: When the ignition is first turned o...

SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or near the airbag cover, on the side of the seat backs (of the front seats), or in front seat areas that may come into contact with adeploying airbag. Failure to follow these instructions may increase therisk of personal injury in the...

The system consists of thefollowing: • a tag on the seat back indicatingthat side airbags are found onyour vehicle • side airbags located inside theseat back of the driver and frontpassenger seats. • crash sensors and monitoring system with readinessindicator. See Crash Sensors and Airbag Indicator ...

Children 12 years old and under should always be properly restrained inthe rear seats. The Safety Canopy will not interfere with childrenrestrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openi...

The safety belt pretensioners and the airbag supplemental restraintsystem are designed to activate when the vehicle sustains frontal orsideways deceleration sufficient to cause the restraints control module todeploy a safety device or when a certain likelihood of a rollover event isdetected by the r...

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with IndustryCanada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference...

REMOTE CONTROL Integrated Keyhead Transmitters (IKTs) (If Equipped) Use the key blade to start yourvehicle and unlock or lock thedriver door from outside yourvehicle. The transmitter portionfunctions as the remote control. Note: Your vehicle’s keys came with a security label that providesimportant k...

Note: Your vehicle’s back-up keys came with a security tag thatprovides important key cutinformation. Keep the tag in a safeplace for future reference. Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery term...

Programming Memory to the Transmitter To activate this feature: A. Type 1 B. Type 2 1. Move the memory features to the desired positions using theassociated controls, located on the side seat panels. 2. Press and hold button 1 for five seconds. A tone will sound confirming memory position has been s...

Sounding a Panic Alarm Press the button to activate the alarm. Press the button againor switch the ignition on to deactivate. Note: The panic alarm will only operate when the ignition is off. Remote Start (If Equipped) WARNING: To avoid exhaust fumes, do not use remote start if your vehicle is parke...

Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to your vehicle than when starting due toground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through theinformat...

PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to asadministrator keys or admin ke...

• Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Onceyou select a speed, it will be shown in the display, followed by anaudible tone when the preselected vehicle speed is exceeded. • Audio system maximum volume of 45%. A message will be shown inthe display when you attempt to exceed...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime your vehic...

Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the hornsounds twice and the lamps will not flash. Opening the Trunk Press the button twice within three seconds to open the trunk. Make sure to close and latch the trun...

Smart Unlocks for Intelligent Access Keys (If Equipped) This feature helps to prevent you from unintentionally locking yourintelligent access key inside your vehicle’s passenger compartment orrear cargo area. When you lock your vehicle using the driver or passenger power doorlock control (with the d...

• your vehicle has then come to a stop and the ignition is switched offor to accessory; and • the driver door is opened within 10 minutes of the ignition beingswitched off or to accessory. Note: The doors will not autounlock if you electronically lock the vehicle after you switch the ignition off an...

3. Enter your personal 5-digit code. You must enter each number withinfive seconds of each other. 4. For memory recall feature, enter the sixth digit 1 • 2 to store driver 1 settings or 3 • 4 to store driver 2 settings. Note: Pressing 5 • 6 , 7 • 8 , or 9 • 0 keypad numbers as a sixth digit will not...

Unlocking and Locking the Doors To unlock the driver door: Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of eachother. The interior lamps will illuminate. Note: All doors will unlock if the two-stage unlocking feature is disabled. Refer to L...

1. Place the first programmed key in thebackup slot inside the center console.The key ring must be at the top with thebuttons facing toward the rear. 2. Press the START/STOP button once and wait a few seconds. 3. Press the START/STOP button again and remove the key. 4. Insert the second programmed k...

INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and riskinjury. Children should be taught not to play in vehicles. WARNING: Do not le...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 See the Cruise Control chapter for information on this feature. INFORMATION DISPLAY CONTROL See the Information Displays chapter for more information. SET RES CNCL ON OFF GAP 84 Steering Wheel 2014 TaurusOwners Guide gf, 1st Printing, April 2013USA (fus)

Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the centercontrol on the faceplate. See MyFord system in the Audio Systems chapter. MyFord Touch: Use this control to adjust the right side of the cluster display. Navigate through the screen and pre...

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue,...

WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty. This m...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Push the lever toward theinstrument panel again or pullthe lever towards you todeactivate. Headlamp Flasher • Pull tow...

AUTOLAMPS WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the ...

HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to threeminutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp p...

AUTOMATIC HIGH BEAM CONTROL (IF EQUIPPED) The system will automatically turn on your high beams if it is darkenough and no other traffic is present. When it detects an approachingvehicle’s headlights, a preceding vehicle’s tail lamps or street lighting, thesystem will turn off the high beams (low be...

The high beams will switch off if: • An approaching vehicle’s headlights or a preceding vehicle’s tail lampsare detected. • The vehicle speed falls below 19 mph (30 km/h). • The ambient light level is high enough that high beams are notneeded. • Severe rain, snow or fog is detected. • The camera is ...

DIRECTION INDICATORS • Push down to activate the leftturn signal. • Push up to activate the right turnsignal. Note: Tap the lever up or down to make the direction indicators flash only three times to indicate a lane change. INTERIOR LAMPS Front row map lamps The map lamps are located on theoverhead ...

Rear dome/reading lamps Your vehicle may have readinglamps within the rear domelamp(s). Press the switches on either side ofthe dome lamp to turn on thereading lamps. The direction of thereading lamps can be adjusted bypressing on the sides of the readinglamps. The dome/reading lamps will light when...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in ...

Bounce-Back (One-Touch Up or Down Windows Only) The window will stop automatically while closing and reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back Feature WARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle. T...

EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicatorlight on the button will illuminate. 2. Use...

Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutboard corner of the exterior mirrors. They are designed to assist youby increasing visibility along the side o...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

Illuminated Visor Vanity Mirror Lift the cover to switch on thelamp. SUNSHADE (IF EQUIPPED) The power rear sunshade covers the rear window of the vehicle. The control is located in the centerconsole access bin. Press the control to move the sunshade up or down. Note: Do not try to manually move the ...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Left information display. See Information displays for more information. B. Speedometer C. Right information display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS These indicators can alert you to a vehicl...

Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate whatmode the system is in: • On (white light): Illuminates when the adaptive cruise control systemis turned on. Turns off when the speed control system is turned off. • Engaged (green light...

High beams Illuminates when the high-beam headlamps are on. Low fuel (RTT) Illuminates when the fuel level in the fuel tank is at or nearempty. Low tire pressure warning Illuminates when your tire pressure is low. If the light remainson at start up or while driving, the tire pressure should bechecke...

Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and toindicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the “service engine soon” light will stay on until theengine ...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

†Trip 1 & 2 Trip Odometer Hold OK to Reset Trip Timer Average Fuel Compass (located in lower line of display). Note: this will also display in other menus. Total Odometer (located in lower line of display). Note: this will also display in other menus. †See Trip and fuel economy computer later in...

Settings Driver Assist Traction Control — check enabled (default) /uncheck disabled Blind Spot — check enabled (default) / uncheckdisabled Collision Warning Sensitivity High, Normal orLow Chimes (not selectable if using aMyKey) Warning (not selectable if using aMyKey) Cross Traffic — check enabled (...

Settings MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On or User Selectable Traction Control Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Minder 45 mph (75 km/h), 55 mph(90 km/h), 65 mph (105 km/h) orOff Volume Limiter Clear MyKeys Hold OK to Clear MyKeys TRI...

Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow button toexit a menu. • Press the OK button to chooseand confirm a setting/messages. Main menu...

Fuel Economy Use the left/right arrow buttons to choose the desired fuel economydisplay. Fuel Economy Fuel Economy Inst Fuel Economy XX. Min Fuel History Instantaneous fuel usage X Fuel usage over a 30 minute timespan X Average MPG Always Present XXX mi (km) to E Always Present Total odometer (lower...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the OK button toacknowledge and remove somemessages from the...

Alarm/Security Messages Action / Description Vehicle Alarm To StopAlarm, Start Vehicle. Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to st...

AWD Messages Action / Description Change AWD PowerTransfer Unit Lube Displayed when the AWD system needs itspower transfer unit lubrication changed. Thismessage may be set if a vehicle has experiencedextended periods of extreme/severe duty cycledriving. See your authorized dealer for service.(Taurus...

BLIS® Messages Action / Description Blindspot NotAvailable SensorBlocked See Manual Displayed when the blind spot informationsystem/cross traffic alert system sensors areblocked. Driver can typically clean the sensorto resolve. Blindspot System Fault Displayed when a fault with the blind spot inform...

Collision Warning System Messages Action / Description Collision Warning NotAvailable Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision Warning NotAvailable SensorBlocked See Manual ...

Lane Keeping System Messages Action / Description Lane keeping Sys.Malfunction Servicerequired The system has malfunctioned. Contact yourauthorized dealer as soon as possible. Front CameraTemporarily NotAvailable The system has detected a condition that hascaused the system to be temporarilyunavaila...

Passenger Sensing System Message Action / Description Occupant SensorBLOCKED RemoveObjects NearPassenger Seat Displayed when objects are by the passengerseat. After the objects are moved away fromthe seat, if the warning stays on or continuesto come on contact your authorized dealer assoon as possib...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switchthe fan off, the windshield may fog up. B. Defrost: Distributes air through the windshield defroster vents and demi...

H. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster vents, demistervents and floor vents. Distributes air through the instrument panel vents. Distributes air through the instrument panel vents, floor vents,and de...

B. Rear defrost: Turns the heated windows and mirrors off and on. See Heated windows and mirrors later in this chapter for more information. If your vehicle is equipped with heated mirrors, this buttonturns them on also. C. AUTO: Press to turn on fully automatic operation. Select the desired tempera...

F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air. To improve air conditioning when startingyour vehicle, drive with the windows slightly open for two to threeminutes.Use A/C with recirculated air to improve cooling performance andefficiency. Not...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C mode, adjust the blower fan speed to the lowest settingand put the vehicle’s transmission into position P (vehicles equipped with an automatic transmiss...

For maximum cooling performance in AUTO mode, press MAX A/C. For maximum cooling performance in manual override control:1. Choose Panel, A/C, and recirc controls.2. Set the temperature to LO.3. Set the fan to the highest blower setting. To aid in side window defogging and demisting in cold or humid ...

The particulate air filtration system is designed to reduce theconcentration of airborne particles, such as dust, spores and pollen, inthe air being supplied to the interior of the vehicle. The particulatefiltration system gives the following benefits to customers: • Improves the customer’s driving ...

Automatic Climate Systems In hot weather, the system is set to 72°F (22°C). Cooled seats are set tohigh (if available and selected to AUTO in the information display). In moderate weather, the system either heats or cools (based onprevious settings). The rear defroster, heated mirrors and heated/coo...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

Rear seat center head restraint The head restraints consist of: A. An energy absorbing head restraint B. Two steel stems C. Guide sleeve adjust and release button D. Guide sleeve unlock and remove button • Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve adjust and ...

MANUAL SEATS WARNING: Do not adjust the driver’s seat or seat back while the vehicle is moving. WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged. Moving the seats backward andforward WARNING: Before returning the seat back to its original ...

Recalling a memory position with the remote control The memory positions are also recalled when you press unlock on yourremote control (if the transmitter is programmed to a memory position)or, when you enter a valid personal entry code that is programmed to amemory position. If the easy entry featu...

To operate the heated seats: Press the heated seat symbol to cycle through the variousheat settings and off. Warmer settings are indicated bymore indicator lights. If the engine falls below 350 RPM while the heated seats are on, thefeature will turn itself off. You will need to reactivate it. Ventil...

To remove an air filter: 1. Turn the vehicle off. 2. Push up on the outside rigid edgeof the filter and rotatecounterclockwise once the tabs arereleased, then remove the filter. To install a filter: 1. First, position the filter in itshousing making sure that the farforward end is all the way up in ...

HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the ...

1. With your vehicle parked outside of the garage and your key in theignition, turn the key so that the ignition is in the on position. 2. Hold your hand-held, garage doortransmitter 1–3 inches (2–8 centimeters)away from the HomeLink button you wantto program. 3. Using both hands, simultaneously pre...

6. Return to your car. 7. Press and hold the function button youwant to program for two seconds, thenrelease. Repeat this step. Depending onyour brand of garage door opener, youmay need to repeat this sequence a thirdtime. To program additional buttons, repeat Steps 1 – 4 . For questions or comments...

Programming HomeLink to the Genie Intellicode garage dooropener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garagedoor opener motor: 1. Press and hold the PROGRAMbutton on the garage door openermotor until both blue LED’s turn on. 2. Release t...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Note: The appearance and features of the center console may be different than shown based on your vehicle’s option level. Available cons...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. 162 Storage Compartments 2014 TaurusOwners Guide gf, 1st Printing, April 2013USA (fus)

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Ignition Modes Off: Turns the ignition off. • Without applying the brake pedal, press and release the button oncewhen the ignition is in the on mode, or when the engine is runningbut the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not runnin...

Failure to Start If you cannot start the engine after three attempts, wait 10 seconds andfollow this procedure:1. Fully press the brake pedal.2. Fully press the accelerator pedal and hold it there.3. Start the engine. Automatic Engine Shutdown Your vehicle has a feature that automatically shuts down...

Stopping the Engine When Your Vehicle is Moving WARNING: Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not lock, but higher effort will be required. When theignition is switched off, some electrical circuits, warni...

Note: The heater is most effective when outdoor temperatures are below 0°F (-18°C). The heater acts as a starting aid by warming the engine coolant. This allowsthe climate control system to respond quickly. The equipment includes aheater element (installed in the engine block) and a wire harness. Yo...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Octane recommendations • 3.5L V6 engine “Regular” unleaded gasoline with a pump (R+M)/2 octane rating of 87 isrecommended. Some stations offer fuels posted as “Regular” with anoctane rating below 87, particularly in high altitude areas. Fuels withoctane levels below 87 are not recommended. • 3.5L V6...

Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of a portable fuel container or aftermarket funnel into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto theground instead of filling the tank, which could result in seri...

If the fuel fill inlet was not properly closed, a Check Fuel Fill Inletmessage may appear on the information display.At the next opportunity, do the following:1. Safely pull off the road.2. Turn off the engine.3. Open the fuel filler door and remove any visible debris from the fuelfill opening.4. In...

1. Fill the fuel tank completely and record the initial odometer reading. 2. Each time you fill the tank, record the amount of fuel added. 3. After at least three to five tank fill-ups, fill the fuel tank and recordthe current odometer reading. 4. Subtract your initial odometer reading from the curr...

4. Driving through deep water—the electrical system may be wet. These temporary malfunctions can be corrected by filling the fuel tankwith good quality fuel, properly closing the fuel fill inlet or letting theelectrical system dry out. After three driving cycles without these or anyother temporary m...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower gear operation ...

Automatic Transmission Adaptive Learning This feature is designed to increase durability and provide consistentshift feel over the life of the vehicle. A new vehicle or transmission mayhave firm shifts, soft shifts or both. This operation is considered normaland will not affect function or durabilit...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of your vehicle and may adversely affect the performanceof the AdvanceTrac® system. In...

A Vehicle without AdvanceTrac® skidding off its intended route. B Vehicle with AdvanceTrac® maintaining control on a slipperysurface. USING ADVANCETRAC® The system automatically activates when you start your engine. Theelectronic stability control portion of the system is disabled when thetransmissi...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

If a fault is present in the system, a warning message appears in theinformation display and does not allow the driver to switch the faultedsystem on. Note: If your vehicle is equipped with MyKey®, it is possible to prevent turning the sensing system off. Refer to the MyKey® chapter. Using the Rear ...

The system detects an available parallel parking space and automaticallysteers the vehicle into the space (hands-free) while you control theaccelerator, gearshift and brakes. The system visually and/or audiblyinstructs the driver to park the vehicle. The system may not function correctly if somethin...

When a suitable space is found, the touch screen displays a message anda chime sounds. Slow down and stop at approximately position (A), thenfollow the instructions on the touch screen. Note: You must observe that the selected space remains clear of obstructions at all times in the maneuver. Note: V...

WARNING: Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines(if enabled) have been removed when the trunk is ajar. WARNING: Use caution when turning camera features on or off...

Guidelines and the Centerline Note: Fixed guidelines and active guidelines (if equipped) are only available when the transmission is in R (Reverse). Note: The centerline is only available if Fixed or Active (if equipped) guidelines are on. A. Active guidelines (if equipped) B. Centerline C. Fixed gu...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serio...

WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times. The system adjusts your speed to maintain a proper distance betweenyou and the vehicle in front of you in the sam...

The information display will show a green indicator light,current gap setting and desired set speed. 4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic willilluminate if there is a vehicledetected in front of you. Note: When adaptive cruise control is active, the set speed displa...

Low Speed Automatic Cancellation The system is not functional at vehicle speeds below 16 mph (26 km/h).An audible alarm sounds and the automatic braking released if yourvehicle drops below this speed. Hilly Condition Usage Note: An audible alarm sounds and the system shuts down if it is applying bra...

Detection issues can occur: A. When driving on a different linethan the vehicle in front. B. With vehicles that edge into yourlane. The system can only detectthese vehicles once they move fullyinto your lane. C. There may be issues with thedetection of vehicles in front whendriving into and coming o...

Cause Action The surface of the radar in thegrille is dirty or obstructed insome way. Clean the grille surface in front ofthe radar or remove the objectcausing the obstruction. The surface of the radar in thegrille is clean but the messageremains in the display. Wait a short time. It may takeseveral...

DRIVER ALERT (IF EQUIPPED) WARNING: The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on/off setting in the information display menu through igniti...

System Display When active the system will run automatically in the background andonly issue warning if required. You can view the status at any time usingthe information display. Refer to the Information Displays chapter. The alertness level is shown by six steps in a colored bar. The current asses...

System Display When you switch the system on, an overhead graphic of avehicle with lane markings will be displayed in the leftinstrument cluster display. If the aid mode is selected after you switch the system on,arrows will be displayed with the lane markings. When you switch the system off, the la...

Using the Systems BLIS® turns on when the engine is started and the vehicle is drivenforward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS®turns ...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS® and CTA systemsilluminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approachin...

System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as areplacement for using the side and rear view mirrors and looking overyour shoulder before changing lan...

This system is designed to alertthe driver of certain collision risks.A radar detects if your vehicle israpidly approaching another vehicletraveling in the same direction asyours. If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver...

WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation of the electronic system. When an electronic error isdetected, a message will be displayed in the information display. If thishappens, stop the vehicle in a safe place, a...

CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided. Do notput more than 50 pounds(22 kilograms) in the net. LOAD LIMIT Vehicle Loadin...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s pla...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

Hitches Do not use a hitch that either clamps onto the bumper or attaches to theaxle.Distribute the trailer load so 10-15% of the total trailer weight is on thetongue. Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of your vehicle...

Replace the rear axle lubricant anytime the rear axle submerges inwater. Water may have contaminated the rear axle lubricant, which doesnot normally require checking or changing unless it is leaking or otheraxle repair is required. TRANSPORTING THE VEHICLE If you need to have your vehicle towed, con...

Front-wheel drive vehicles must have the front wheels placed on a towdolly when towing your vehicle from the rear using wheel lift equipment.This prevents damage to the transmission. Towing an all-wheel drive vehicle requires that all wheels be off theground, such as using a wheel lift and dollies o...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Rest your foot on the brake pedal while driving. • Drive a heavily loaded vehicle or tow a trailer. • Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair s...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24 hours a...

U.S. Ford vehicle customers who require Roadside Assistance, call1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 kilometers). To obtain reimbursementinformation, U.S....

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

These are some of the items that can be found online: • U.S. Dealer Locator by Dealer Name, City/State, or Zip Code • Owner Manuals • Maintenance Schedules • Recalls • Ford Extended Service Plans • Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relati...

You can get more information by calling BBB AUTO LINE at1-800-955-5100, or writing to: BBB AUTO LINE3033 Wilson Boulevard, Suite 600Arlington, Virginia 22201 BBB AUTO LINE applications can also be requested by calling the FordMotor Company Customer Relationship Center at 1-800-392-3673. Note: Ford M...

GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country, contact theappropriate foreign embassy or consulate. These officials can inform youof local vehicle registration regulations and where to find unleaded fuel. If you cannot find unleaded fuel or can onl...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in yourvehicle are not working, a fuse mayhave blown. Blown fuses areidentifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located under the instrument panel to the left of thesteering wheel. You may need to remove a trim panel to access it. The fuses are coded as follows. Fuse or relay number Fuse amp rating Protected components 1 30A Left front and right rear smartwin...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealerswho are there to help you with their professional servicing expertise.We believe that their specially trained technicians are best qualifie...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Maintenance 27...

UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap A I H G F B C D E 278 Main...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. 280 Maintenance 2014 TaurusOwners Guide gf, 1st Printing, April 2013USA (fus)

2.0L EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir A H G F E B C D Maintenance 281 2014 TaurusOwners Guide gf, 1st Printing, April ...

ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into theoil pan. 3....

ENGINE COOLANT CHECK Checking the Engine Coolant The concentration and level of engine coolant should be checked at theintervals listed in Scheduled Maintenance Information. Note: Make sure that the level is at the FULL COLD level or within the COLD FILL RANGE in the coolant reservoir. Note: Coolant...

Recycled Engine Coolant Ford Motor Company does NOT recommend the use of recycled enginecoolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recyclingand disposi...

You may notice a reduction in the vehicle’s speed caused by reducedengine power. Your vehicle has been designed to enter this mode ifcertain high temperature/high load conditions take place in order tomanage the engine’s fluid temperatures. The amount of speed reductionwill depend on the vehicle loa...

WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will not beable to maintain high-speed o...

7. Without disconnecting the sensor (4), pull the air filter assembly up todisconnect the air filter assembly from the seated grommets locatedunderneath the air filter assembly. 8. Rotate the air filter assembly 90degrees counterclockwise andreinstall into the rubber hose. 9. Tighten the clamp (1). ...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near thebattery, always shield your face and protect your eyes. Always provideproper v...

Battery relearn Because your vehicle’s engine is electronically controlled by a computer,some control conditions are maintained by power from the battery. Whenthe battery is disconnected or a new battery is installed, the engine mustrelearn its idle and fuel trim strategy for optimum driveability an...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm awayfrom the glass. 2. Squeeze the locking tabs to r...

For EcoBoostequipped vehicles: When servicing the air cleaner, it isimportant that no foreign material enter the air induction system. Theengine and turbocharger are susceptible to damage from even smallparticles. Refer to Scheduled Maintenance for the appropriate intervals for changing the air filt...

3.5L V6 SHO engine 1. Release the clamps that secure the air filter housing cover. 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. Wipe the air filter housing and cover clean to remove any dirt ordebris and to ensure go...

Replacing HID headlamp bulbs (if equipped) The headlamps on your vehicle use a “high intensity discharge” source.These lamps operate at a high voltage. When the bulb is burned out, thebulb and starter capsule assembly must be replaced by your authorizeddealer. Replacing stop/tail/turn and sidemarker...

• Spray Motorcraft® Engine Shampoo and Degreaser on all parts thatrequire cleaning and pressure rinse clean. In Canada, use Motorcraft®Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in therunning engine may cause internal damage. • Never wash or rinse any ignition...

CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side...

CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. Aluminum wheels and wheel covers are coated with a clearcoat paintfinish. In order to maintain their condition: • Clean weekly with Motorcraft Wheel and Tire Cleaner. Use a sponge toremove ...

Battery • Check and recharge as necessary. Keep connections clean. • If storing your vehicle for more than 30 days without recharging thebattery, it may be advisable to disconnect the battery cables to ensurebattery charge is maintained for quick starting. Note: If battery cables are disconnected, i...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. The TireQuality Grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A Thes...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

Information on P Type Tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) A. P: Indicates a tire, designated by the Tire ...

G. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional Information Contained on the Tire Sidewall for LT TypeTires LT type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. A. LT: Indicates a tire, designated by the Tire and Rim...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum loadcan be carried by the tire. This pressure is normally higher than themanufacturer’s recommended cold inflation pressure, which can be foundon the Safety Compliance Certificatio...

Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see Dissimilar Spare Tire and Whee...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as apair. The tire pressure sensors mo...

If you feel a sudden vibration or ride disturbance while driving, or yoususpect your tire or vehicle has been damaged, immediately reduce yourspeed. Drive with caution until you can safely pull off the road. Stop andinspect the tires for damage. If a tire is under-inflated or damaged,deflate it, rem...

• Front-wheel drive/All-wheel drivevehicles (front tires at left ofdiagram) Sometimes irregular tire wear can be corrected by rotating the tires. USING SUMMER TIRES Your Taurus SHO may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud ...

The tires on your vehicle may have all-weather treads to provide tractionin rain and snow. However, in some climates, you may need to use snowtires and chains. If you need to use chains, it is recommended that steelwheels (of the same size and specifications) be used, as chains may chipaluminum whee...

Changing Tires with a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor locatedinside the tire and wheel assemblycavity. The pressure sensor isattached to the valve stem. Thepressure sensor is covered by thetire and is not visible unless the tireis removed....

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it onthe vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, the tire pressure monitoring system sensor andvalve stem on the wheel must be replaced by an authorized Forddealer. WARNING: See Tire Pr...

• Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be...

WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity isadequate for the vehicle weight, including any vehicle cargo ormodifications. Note: Passengers should not ...

TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. Your vehicle may be equipped with a temporary mobility kit (located inthe spare tire we...

Do not attempt to repair punctures larger than 1 ⁄ 4 inch (6 millimeters) or damage to the tire’s sidewall. The tire may not completely seal. Loss of air pressure may adversely affect tire performance. For thisreason: • Note: Do not drive the vehicle above 50 mph (80 km/h). • Note: Do not drive furt...

• Only use the sealing compound before the use by date. The use bydate is on the lower right hand corner of the label located on thesealant canister (bottle). Check the use by date regularly and replacethe canister after four years. • Do not store the temporary mobility kit unsecured inside thepasse...

Preparation Park the vehicle in a safe, level and secure area, away from movingtraffic. Turn the hazard lights on. Apply the parking brake and turn theengine off. Inspect the flat tire for visible damage. Sealant compound contains latex. To avoid any allergic reactions, use thenon-latex gloves locat...

Second Stage: Checking Tire Pressure WARNING: The power plug may get hot after use and should be handled carefully while unplugging. Check the air pressure of your tires as follows: 1. Remove the valve cap from the tire valve. 2. Unhook the black hose from the side of the compressor and fastenfirmly...

What to do after the Tire has been Sealed After using the temporary mobility kit to seal your tire, replace thesealant canister and clear tube (hose). Sealing compound and spareparts can be obtained and replaced at an authorized Ford MotorCompany dealership or tire dealer. Empty sealant bottles may ...

Be sure to check the sealantcompound’s use-by date regularly.The use-by date is on the lowerright hand corner of the labellocated on the sealant canister. Thesealant canister should be replacedafter four years. TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is ins...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 SHO engine 2.0L EcoBoost engine Cubic inches 214 214 122 Required fuel See Octane recommendations in the Fuel and Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignitionsystem Coil on plug Coil on plug Coil on plug Spark pluggap 0....

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver’s sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacture...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your authorized dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourauthorized Ford or Ford of Canada dealer....

Peace of mind • Remote start • Wheel locks • Locking fuel plug for capless fuel system • Bumper mounted parking sensors* • Vehicle security *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designed anddeveloped by the accesso...

FORD ESP EXTENDED SERVICE PLANS PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRSWITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. only) More than 32 Million Ford and Lincoln owners have discovered thepowerful protection Ford ESP. It is the only extended service planbacked by Ford Motor ...

Interest Free Financing Options Available Take advantage of our interest free installment payment plan. Just a 10%down payment will provide you with an affordable, no interest, no feepayment program. Complete the information below and mail to: Ford ESPPO Box 8072Royal Oak Michigan 48068-0039 To lear...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agai...

C. Memory presets: • In radio mode, store your favorite radio stations. To store a radiostation, tune to the station, then press and hold a preset button untilsound returns. • In CD mode, press one of these buttons to select a track. D. Function buttons: Select different functions of the audio syste...

M. PHONE: Press this button to access the phone features of the SYNC system. See the SYNC chapter for more information. N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter. O....

SIRIUS Channel Guide Select to view available satellite radiochannels. Press OK to open a list of the following options for this channel: TuneChannel, Skip Channel or Lock Channel. Onceyou skip or lock a channel, you can only accessit by pressing Direct and entering the channelnumber. Locking or unl...

WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend against the use of ...

When HD Radio broadcasts are active, you can access the followingfunctions: When you select: You can: Scan Hear a brief sampling of all available stations.This feature still works when HD Radioreception is on, although it does not scan forHD2-HD7 channels. You may see the HD logoappear if the statio...

HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels Sirius broadcasts a variety of music, news, sports, weather, traffic andentertainment satellite radio channels. For more information and acomplete list of Sirius satellite radio channels, visit www.siriusxm.com inthe United States, w...

Sirius satellite radio is asubscription-based satellite radioservice that broadcasts a variety ofmusic, sports, news, weather, trafficand entertainment programming.Your factory-installed Sirius satelliteradio system includes hardware and a limited subscription term which begins on the date of sale o...

USB PORT WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend against th...

SYNC is an in-vehicle communications system that works with yourBluetooth-enabled cellular phone and portable media player. This allowsyou to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic,Directi...

When using SYNC: • Do not operate playing devices if the power cords or cables arebroken, split or damaged. Place cords and cables out of the way, sothey do not interfere with the operation of pedals, seats,compartments or safe driving abilities. • Do not leave playing devices in your vehicle during...

To access:1. Press MENU during an active call.2. When Active Call Menu is selected, press OK.3. Scroll to cycle through the following options: When you select: You can: Mute Call? Mute the call. Privacy Switch a call from an active hands-freeenvironment to your cellular phone for a moreprivate conve...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll throughyour call history options (incoming, outgoingor missed).2. Press OK when the desired selectionappears in the display.3. Press the phone button to call theselection. Return Exit the current m...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.,add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, United States only): ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

3. While on an active route, you can select or say “Route summary” or “Route status” to view the Route Summary turn list or the RouteStatus ETA. You can also turn voice guidance on or off, cancel theroute or update the route. If you miss a turn, SYNC automatically asks if you want the routeupdated. ...

“USB” “Search song <name>” 1,3 “Search track <name>” 1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Vo...

Voice command guide “Refine” This allows you to make your previouscommand more specific. For example, if youasked to search and play all music by acertain artist, you could then say “refinealbum” and choose a specific album from thelist to view. If you then select Play, the systemonly plays music fr...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Explore USB Explore all supported digital media on yourmedia device connected to the USB port.You can only view media content which iscompatible with SYNC; other files saved arenot visible.Press OK to select. Then scroll to exploreindexed media on your flash drive. Similar ...

Advanced Menu Options This menu allows you to access settings such as prompts, language,performing a master reset as well as returning to factory defaults.1. Press AUX and then MENU to access the Media Menu.2. Scroll until System Settings appears and select OK.3. Scroll until Advanced appears.4. Pre...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications(if available) and then load the desiredapplications throu...

Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnum...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agains...

SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’s optionpackage and software, your screens may vary in appearance from thedescriptions in this section. Your features may also be limi...

Safety Information WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend ...

The cellular profile, media device index, and development log remain inthe vehicle unless you delete them and are generally accessible only inthe vehicle when the cellular phone or media player is connected. If youno longer plan to use the system or the vehicle, we recommend youperform a Master Rese...

How to Use Voice Commands with Your System Press the voice icon. After the tone, speak your commandclearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say? To access the available vo...

Accessing a List of Available Commands • If you use the touchscreen, press the Settings icon > Help > Voice Command List. • If you use the steering wheel control, press the voice icon. After thetone, speak your command clearly. Voice command list “Audio list of commands” “Bluetooth audio list ...

Press the voice icon on the steering wheel. When prompted,you can say: “BROWSE” within devices “Browse” * “Browse <league> games” ** “Browse <Sirius category> channels” ** “Browse Sirius channel guide” ** “Browse SD card” “Browse USB” “Help” * If you have said “Browse”, you can then say ...

“AM <530 - 1710>” “FM <87.7 – 107.9>” “<530 - 1710>” “<87.7 – 107.9>” “Sirius <0-223>” * “<Channel name>” * “Play [genre] <name>” ** “Play [playlist] <name>” ** “Play [artist] <name>” ** “Play [song] <name>” ** “Play [album] <name>” *...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas.There is a brief mute while the radio saves the channel. Sound returnswhen finished. ALERT Save the current ...

Potential satellite radio reception issues Satellite radio signalinterference Your display may show ACQUIRING . . . toindicate the interference and the audiosystem may mute. Sirius troubleshooting tips Radio display Condition Possible action Acquiring... Radio requires morethan two seconds toproduce...

Sirius troubleshooting tips Radio display Condition Possible action Call SIRIUS1–888–539–7474. Your satellite service isno longer available. Contact Sirius at1-888-539-7474 toresolve subscriptionissues. None Found. CheckChannel Guide. All the channels in theselected channels areeither skipped orlock...

Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on a...

Options allows you to view and adjust various media settings. • Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. • M...

If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, say “USB” or “SD card”, then any of thecommands in the following chart. “USB” or “SD CARD” “Browse” * “Play previous song” “Next” “Play similar music” “Pause” “Play song <name>” “Play” “Play TV s...

To access, press the lower left corner on the touchscreen, thenselect the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio device, press the voicebutton on the steering wheel control. When prompted, say“Next song”, “Pause”, “Play” or “Previous song”. If you are...

Troubleshooting • Do not connect the audio input jack to a line level output. The jackonly works correctly with devices that have a headphone output witha volume control. • Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio as this c...

Receiving Calls During an incoming call, an audible tone sounds. Call informationappears in the display if it is available. Accept the call by pressing Accept on the touchscreen or by pressing this phone button on your steering wheel controls. Reject the call by pressing Reject on the touchscreen or...

Note: This is a phone-dependent feature. If your phone does not support downloading call history using Bluetooth, SYNC keeps track of calls madewith the SYNC system. Messaging Send text messages using your touchscreen. See Text messaging later in this section. Settings Touch this button to access va...

You can then preview the message, verify the recipient as well as updatethe message list, and send it to a connected device (such as a USBdrive). Pre-defined text message options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way. I’m running ...

INFORMATION If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A. SYNC Services B....

Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicleis not equipped with Navigation, touch the corner of thetouchscreen with the green tab. Press Services. 1. Select Connect to Service...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel control. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summa...

If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of thetouchscreen with the green tab. Traffic On Route and Traffic Nearby Touch these buttons to identify traffic incidents on your ...

Sirius Travel Link Voice Commands Note: In order to use Sirius Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button on the steering wheel controls and, whenprompted, say any of the following: Travel Link voice comm...

Setting 911 Assist On If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of thetouchscreen with the green tab. Press Apps > 911 Assist, > On. You can also access 911 Assist by: ...

Note: Cellular phone and SMS charges may apply when making a report. Register for Vehicle Health Report and set your report preferences atwww.SYNCMyRide.com. After registering, you can request a VehicleHealth Report (inside your vehicle). Return to your account atwww.SYNCMyRide.com to view your repo...

SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust thedisplay, sound and vehicle settings as well as access settings forspecific modes or the help feature. Clock Note: You cannot manually set the date. Your vehicle’s GPS do...

From this screen, you can also make other adjustments, such as 12– or24–hour mode, activate GPS time synchronization and have the systemautomatically update for new time zones. You can also turn the outside air temperature display on and off. Itappears at the top center of the touchscreen, next to t...

Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass DSP * Midrange Occupancy Mode * Treble Speed Compensated Volume Set Balance and Fade * If equipped. Vehicle Press the Settings icon > Vehicle, then select from the following: • Ambient Lighting • Vehicle...

Rear View Camera This menu allows you to access settings for your rear view camera. Press the Settings icon > Vehicle > Rear View Camera, then select from the following settings: • Rear Camera Delay • Visual Park Aid Alert • Guidelines. Enable Valet Mode Note: If the system locks, and you need...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the sys...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

Additional climate control voice commands “Max A/C on” “Temperature high” “My temp” “Temperature increase” “Off” “Temperature low” “On” “Windshield floor on” “Panel floor on” “Help” * If you have said “Temperature”, you can say any of the commands in the following “Temperature” chart. “TEMPERATURE” ...

Setting a Destination Press the green corner of your touchscreen, then Dest when it appears. Choose any of the following: Destination selections My Home Street Address Favorites Intersection Previous Destinations City Center Point of Interest Map Emergency Edit Route Cancel Route 1. Enter the necess...

cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico). cityseekr, when available, is a service thatprovides more information about certainpoints of interest such as restaurants,hotels an...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr also tellsyou if the hotel has certain services and facilities using icons. Hotel services and facilities Restaurant 24 Hr Room Service Business Center Fi...

Avoid Areas Avoid Areas allows you to choose areas which you want the system to avoid when calculating a route for you. Press Add to program an entry. Once you make a selection, the system tries to avoid the area(s) if possible for all routes. To delete a selection,choose the listing on the screen. ...

Set as Dest Touch this button to select a scrolled location on the map as yourdestination. You may scroll the map by pressing your index finger on themap display. When you reach the desired location, simply let go and thentouch Set as Dest. Set as Waypoint Touch this button to set the current locati...

“DESTINATION” “<nametag>” “<POI category>” “Favorites” “Home” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maxi...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”)from an affiliate of Microsoft Corporation (“MS”). Those installed softwareproducts of MS origin, as well...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

suppliers. The SOFTWARE is licensed, not sold. You may not copy theprinted materials accompanying the SOFTWARE. All title and intellectualproperty rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by appl...

• THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY EXPRESSLY BE PROVIDED FOR YOUR NEW VEHICLE. Adobe Contains Adobe® [Flash® Player] or [AIR®] technology by AdobeSystems Incorporated. This [Licensee Product] contains [Adobe® Flash®Player] [Adobe® AIR®] software under license from Adobe SystemsIncor...

General operation Voice Command Control Functions within the Windows Automotive-based system may beaccomplished using only voice commands. Using voice commands whiledriving allows you to operate the system without removing your handsfrom the wheel. Prolonged Views of Screen Do not access any functio...

Agreement. As used in this Agreement, the words “include” and“including,” and variations thereof, will not be deemed to be terms oflimitation, but rather will be deemed to be followed by the words“without limitation.” 9. Other Vendors Terms and Conditions The TeleNav Software utilizes map and other ...

Disclaimer of Warranty: NT AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES,EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ORNON-INFRINGEMENT. Some States, Territories and Countries do notallow certain warranty exclusi...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay help to increase the value of your vehicle when you sell or trade it.Keep all receipts for comple...

Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designat...

Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concern or that the fluidneeds to be changed. However, discolored fluids that also show signs ofoverheating and foreign material contamination should be in...

Normal scheduled maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick...

Other maintenance items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace climate-controlled (heated andcooled) seat filter 2 . Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 3 Every 100000 miles(160000 km) Replace...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated bythe information display and perform serviceslisted in the Normal Scheduled Maintenancechart. Inspect frequently,s...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Edge/MKX AWD only: Vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20000 miles (32000 kilometers). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is depend...

911 Assist™ ......................401, 476 A ABS (see Brakes) .....................194 Accessing and using your USBport ............................................453 Accessing call history/phonebook during active call .............390 Accessing your calendar ..........475 Accessing your media menu...