Ford 2014 Mustang v.3- User Manual

DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This potentiallyincludes information about the performance or status of various systemsand modules in the vehicle, such as engine, throttle, st...

CALIFORNIA PROPOSITION 65 WARNING: Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to theState of California to cause cancer and birth defects or otherreproductive harm. PERCH...

Collision Repairs We hope that you never experience a collision, but accidents do happen.Genuine Ford replacement collision parts meet our stringentrequirements for fit, finish, structural integrity, corrosion protection anddent resistance. During vehicle development, we validate that these partsdel...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infantsortoddlers Children weighing 40 lb (18 kg) or less(generally age four or younger). Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddlerseat). Smallc...

CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move thevehicle seat upon which the child seat is installed all the way back.When poss...

WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. WARNING: To avoid risk of injury, do not leave children, unreliable adult...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

• Keep the buckle release button pointing up and away from the safetyseat, with the tongue between the child seat and the release button,to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed inthe upright position. • Put the safety belt in the automat...

3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingf...

Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injuryor death. WARNING: Depending on where you secure a chil...

Your vehicle has LATCH loweranchors for child seat installation atthe seating positions marked withthe child seat symbol. The LATCH anchors are located atthe rear section of the rear seatbetween the cushion and seat backbelow the symbols as shown. Followthe child seat manufacturer’sinstructions to p...

The tether strap anchors in yourvehicle are in the following positions(shown from top view): Perform the following steps to attach a child safety seat to the tetheranchor: For coupe: 1. Route the tether strap over the top of the head restraint. 2. Locate the correct anchor for theselected seating po...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

The safety belt pretensioners are designed to activate in frontal,near-frontal and side crashes. The safety belt pretensioners at the frontseating positions are designed to tighten the safety belts firmly againstthe occupant’s body when activated. This helps increase the effectivenessof the safety b...

2. To unfasten, press the releasebutton and remove the tongue fromthe buckle. Using Safety Belts During Pregnancy WARNING: Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of the safety belt should fit snug and be positioned low across the hips....

How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulderbelt. 2. Grasp the shoulder portion and pulldownward until the entire belt is pulled out. 3. Allow the belt to retract. As the beltretracts, you will hear a clicking sound. Thisindicates the safety belt is now in theauto...

Conditions of Operation If... Then... The driver safety belt is notbuckled before the ignitionswitch is turned to the onposition... The safety belt warning lightilluminates 1-2 minutes and thewarning chime sounds 4-8 seconds. The driver safety belt isbuckled while the indicatorlight is illuminated a...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even wh...

WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The airbags are a supplemental restraint system and are designed towork with the safety belts to h...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbagmodule. Failure to follow this could seriously increase the risk of i...

FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injuryor death. WARNING: Sitting improperly out of position or with the seat back...

The front passenger sensing systemuses a passenger airbag off or passairbag off indicator which willilluminate and stay lit to remind youthat the front passenger frontalairbag is disabled. The indicator lamp is located on the front edge of the map lamps. Note: When the ignition is turned on, the ind...

system. The person in the front passenger seat may appear heavier orlighter due to the conditions described in the list above. Make sure the front passenger sensing system is operatingproperly. See Crash Sensors and Airbag Indicator later in this chapter. If the airbag readiness lamp is lit, do the ...

The design and development of the side airbag system includedrecommended testing procedures that were developed by a group ofautomotive safety experts known as the Side Airbag Technical WorkingGroup. These recommended testing procedures help reduce the risk ofinjuries related to the deployment of si...

The fact that the safety belt pretensioners or airbags did not activate forboth front seat occupants in a crash does not mean that something iswrong with the system. Rather, it means the restraints control moduledetermined the accident conditions (such as crash severity, belt usage)were not appropri...

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with IndustryCanada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference...

Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the keyring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2)from the transmitter if it does not come offwith the battery cover. 3. Remove the old battery (3). 4. Insert the new battery. Refer to the instr...

PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes topromote good driving habits. You can use all but one of the keysprogrammed to your vehicle with these restricted modes. Any keys that have not been programmed are referred to asadministrator keys or admin keys. ...

• Audio system maximum volume of 45%. A message will be shown inthe display when you attempt to exceed the limited volume. Also, thespeed-sensitive or compensated automatic volume control will bedisabled. • Always on setting. When this is selected, you will not be able to turnoff AdvanceTrac (if you...

For Type 2 information display settings:1. Access main menu of your information display and select Settings , then MyKey . 2. Scroll to Clear All and press the OK button. 3. Hold the OK button until ALL MYKEYS CLEARED displays . CHECKING MYKEY SYSTEM STATUS You can find information about your progra...

When you start your vehicle with a Ford-approved aftermarket remotestart system, the system stalls the vehicle after you open the door orshift the vehicle into gear. This is intentional. When you restart yourvehicle, it reads your real key’s status instead of the remote startsystem’s status. As an a...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime your vehic...

Opening the Trunk Press the button twice within three seconds to open the trunk. Make sure to close and latch the trunk before driving your vehicle. Anunlatched trunk may cause objects to fall out or block your view. Smart Locks This feature helps prevent you from locking yourself out of your vehicl...

Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened. Enabling or Disabling Autolock and Autounlock Note: The autolock and autounlock features can be activated or deactivated independently of each other: • through your authorized dealer •...

TRUNK RELEASE The remote trunk release button islocated on the center console. Pressthe button to unlatch the trunk. Interior Trunk Control Lockout (Convertible Vehicles Only) This feature disables the interior trunk control. It helps preventunauthorized access to the trunk when the convertible top ...

INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and riskinjury. Children should be taught not to play in vehicles. WARNING: Do not le...

Automatic Disarming Your vehicle disarms when you switch the ignition on with a coded key. Replacement Keys Note: Your vehicle comes with two integrated keyhead transmitters. The integrated keyhead transmitter functions as a programmed ignitionkey that operates all the locks and starts your vehicle,...

5. Turn the ignition from off to on. Keep the ignition on for at least threeseconds, but no more than 10 seconds. 6. Turn the ignition off and remove the second previously programmedcoded key from the ignition. 7. After three seconds but within 20 seconds of turning the ignition offand removing the ...

Each door, the hood or the trunk is armed individually, and if any areopen, they must be closed for the system to enter the 20 secondcountdown. The turn signal lamps will flash once when all doors, the hood and thetrunk are closed indicating the vehicle is locked and entering the20 second countdown....

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

Press the media button repeatedly to scroll through available audiomodes. Press the seek buttons to select the next or previous stored preset ortrack. Press and hold to select the next or previous frequency or seekthrough a track. VOICE CONTROL (IF EQUIPPED) A. Voice recognition B. Phone mode See th...

INFORMATION DISPLAY CONTROL Type 1 Type 2 See the Information Displays chapter. OK Steering Wheel 77 2014 05+ Mustang (197) Owners Guide gf, 3rd Printing, January 2014USA (fus)

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, i...

• A brief press causes a single wipe without washer fluid. • A quick press and hold causes the wipers to swipe three times withwasher fluid. • A long press and hold will activate the wipers and washer fluid for upto 10 seconds. A wipe will occur a few seconds after washing to clear any remainingwash...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to switch on thehigh beams. • Pull the lever toward you toswitch of the high beams. Headlamp Flasher • Pull toward you slightly to ac...

AUTOLAMPS (If equipped) WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during dayl...

HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to threeminutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp p...

3. Make sure the transmission selector lever is not in position P. 4. Make sure the parking brake is disengaged. FRONT FOG LAMPS The fog lamps can be turned onwhen the lighting control is pulledtoward you and in the headlamps,parking lamps or autolampspositions. The fog lamps will not operatewhen th...

INTERIOR LAMPS Dome/Map lamps The dome lamp lights when: • Any door is opened. • Any of the remote entry controlsare pressed and the ignition isoff. • The instrument panel dimmerswitch is rotated up, past thedetent, until the courtesy lampscome on. The map lamps are activated by pressing the control...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in ...

Manual Override The rear quarter window switch will not operate when: • the convertible top is moving • the convertible top is not completely up or down. The rear quarter windows can be manually raised if the switch does notoperate when the convertible top is completely up or down. The following pro...

Pony Projection Lights (If Equipped) Note: Moisture, frost and ice build-up (or other types of contamination) on the surface of the light lens can cause some non-permanent distortionor reduced brightness of the image. Do not use abrasive materials toclean the lens. The lights are located on the bott...

The image of the approachingvehicle is small and near the inboardedge of the main mirror when it is ata distance. The image becomeslarger and begins to move outboardacross the main mirror as the vehicleapproaches (A). The image willtransition from the main mirror andbegin to appear in the blind spot...

SUN VISORS Slide-On-Rod Rotate the visor toward the sidewindow and extend it rearward forextra sunlight coverage. Retract the visor before moving itback toward the windshield andstoring it. Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. 90 Windows and Mirrors 2014 05+ Mustang ...

Flexible Visor Storage System The system can accommodate various storage accessories. A sunglassesclip and multi-function clip are provided. To attach one of the accessories, dothe following: 1. Insert the provided removal tool(on the accessory holder) or a coininto the slot on the plug and rotateon...

GAUGES Type 1 Cluster shown in standard measure. Metric similar. A. Speedometer B. Fuel gauge C. Engine coolant temperature gauge D. Tachometer E. Information display. See Information displays for more information. Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when theig...

Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel gauge may vary slightly when the vehicle is inmotion or on a grade. The fuel icon and arrow indicates which side ofthe vehicle the fuel filler door is located. Engine Coolant Temperature Gaug...

Brake System Warning Light To confirm the brake system warning light is functional, it willmomentarily illuminate when the ignition is turned to the onposition when the engine is not running, or in a position between on and start, or by applying the parking brake when the ignitionis turned to the on...

Engine Coolant Temperature Illuminates when the engine coolant temperature is high. Stopthe vehicle as soon as possible, switch off the engine and let itcool. High Beams Illuminates when the high beam headlamps are on. Low Fuel Illuminates when the fuel level in the fuel tank is at or nearempty. Low...

Service Engine Soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb andto indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the service engine soonlight will stay on until the engine is...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the ...

MYKEY MILES (km) For more information, see the MyKey® chapter. MILES (km) TO E This displays an estimate of approximately how far you can drive withthe fuel remaining in your tank under normal driving conditions.Remember to turn the ignition off when refueling to allow this feature tocorrectly detec...

Information Messages See Information Messages later in this chapter for more information. Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow butt...

†Gauge Mode Gauges Detail Air/Fuel Ratio Virtual gauge shown Vacuum inHG /Boost psi(Shelby®GT500®) Virtual gauge shown Cyl Head Virtual gauge shown Inlet Air Virtual gauge shown Oil Press. No virtual gauge available Oil Temp. Virtual gauge shown Trans temp(autotransmissiononly) Virtual gauge shown V...

†Track Apps Accelerometer Acceleration timer Brake Performance DashboardScreen (Shelby®GT500®) Launch Control(Shelby®GT500®) Off/On / RPM Setting View/Clear Results †See Track apps later in this section for more information. Note: Track Apps is not intended to be used on public roadways. Settings Dr...

Settings Vehicle Dampers(Shelby®GT500®) Sport / Normal Steering Feel Standard Sport Sport Locked:This will displaywhenAdvanceTrac®sport mode ison or whenAdvanceTrac®and tractioncontrol are off.The steeringfeel will belocked in sportmode andsteering feelwill not beselectable. Comfort Information Disp...

TRIP COMPUTER (Trip A and B) Resetting or Pausing the Trip Computer • Press OK to pause the Trip A or B screen, press again to un-pause. • Press and hold OK to reset the currently displayed trip information. Trip Time Registers the time of individual journeys. Trip Distance Registers the mileage of ...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the RESET button for Type 1 displays or the OK button for Ty...

Maintenance Messages Action / Description ENGINE OILCHANGE SOON Displayed when the engine oil life is nearingits end. OIL CHANGEREQUIRED Displayed when the oil life left reaches 0%. ENGINE OIL LEVELLOW Displayed when the oil level is low. Stop thevehicle in a safe place and check the oil level.Refil...

ELECTRONIC COMPASS The compass heading displays in the center-integrated display. Note: Driving near large buildings, bridges, power lines and powerful broadcast antenna may affect the compass reading. Magnetic or metallicobjects placed in, on or near your vehicle may also affect compassaccuracy. Us...

Compass Calibration Adjustment Most geographic areas (zones) have a magnetic north compass point thatvaries slightly from the northerly direction on maps. This variation is fourdegrees between adjacent zones and becomes noticeable as your vehiclecrosses multiple zones. A correct zone setting elimina...

MANUAL CLIMATE CONTROL A. Defrost: Press the button to distribute air to the windshield vents and de-mister. Air distribution to instrument panel and footwell ventsturn off. You can use this setting to defog and clear the windshield of athin covering of ice. B. Rear defrost: Turns the heated rear wi...

F. Recirculated air: Press the button to switch between outside air and recirculated air. When you select recirculated air, the air currently in thepassenger compartment recirculates. This may reduce the time neededto cool the interior (when used with A/C) and may reduce unwanted odors from entering...

Heating the Interior Quickly Vehicles with manual climate control Vehicles with automatic climate control 1 Adjust the fan speed to thehighest speed setting. Press the AUTO button. 2 Adjust the temperature controlto the highest setting. Adjust the temperature controlto the desired setting. 3 Select ...

Recommended Settings for Cooling Vehicles with manual climate control Vehicles with automatic climate control 1 Adjust the fan speed to thecenter setting. Press the AUTO button. 2 Adjust the temperature controlto the midway point of the coldsettings. Adjust the temperature controlto the desired sett...

HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The vehicle must be running to use this feature. Press the control to clear the rear window of thin ice and fog. Press thecontrol again within 15 minutes to switch it off. It turns off automaticallyafter approximately 15 minutes, or w...

CABIN AIR FILTER Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the systemwithout a filter in place could result in degradation or damage to thesystem. Your vehicle is equipped with a cabin air filter, which is loca...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

• Position the shoulder strap of the safety belt over the center of yourshoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you canmaintain full control of your vehicle. HEAD RESTRAINTS WARNING: To minimize the risk of neck injur...

• Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve adjust and release button (C)and push down on the head restraint (A). • Remove: Pull up the head restraint until it reaches the highestadjustment position and then press and hold both the adjust andrelease button (C...

Press the rotation button to rotate the head restraint forward in order toimprove rear vision when there are no rear seat occupants. Properly adjust the head restraint to an upright driving or riding positionby lifting up on the head restraint until it locks into its original position. Tilting Head ...

Moving the seats backward andforward Recline adjustment WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Adjusting the height of thedriver seat Seats 133 2014 05+ Mustang (197) Owners Guide gf, 3rd Printing, January 2014USA (fus)

REAR SEATS Rear Seat Entry and Exit Use the seatback release to fold theback of the front seat forward forrear seat access. This release handleis located on the upper back of thefront seat. The seatback locksautomatically when returned to thenormal position. Use the recliner handle to returnthe seat...

UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’s universal garage door opener will varyaccording to your option package. Before programing, make sure youidentify which transmitter you have by comparing it to the graphicsbelow. HomeLink® Car2U® Home AutomationSystem Note: The programming...

1. Switch the ignition on. 2. Press and hold the outer twobuttons for 1–2 seconds, thenrelease. Note: You may need a ladder to reach the unit and you may need toremove the cover or lamp lens. Note: If you cannot locate the learn button, see the Owner’s Manual foryour garage door opener or call theto...

Fixed Code Programming Note: It may be helpful to have another person assist you in programming the transmitter. To program units with fixed codeDIP switches, you will need thegarage door hand-held transmitter,paper and a pen or pencil. 1. Switch the ignition on. 2. Open the battery cover and note a...

The LED lamp above the selected button will illuminate to confirm thatthe system is responding to the button command. Erasing the Function Button Codes Note: You cannot erase individual buttons. 1. Press and hold the outer twofunction buttons simultaneously forapproximately 20 seconds until theLED l...

Reprogramming a single button To program a device to a previously trained button, follow these steps: 1. Press and hold the desired button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Withoutreleasing the button, follow Step 1 in the Programming section. F...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Available console features include: • Cupholders in the front of theconsole (pull the door open toaccess). Remove the spacer fromthe cup...

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Takeprecautions to avoid its dangerous effects. Important Ventilating Information ...

• Make sure that when in operation, the extension cord plug and theheater cord plug connections are free and clear of water. This couldcause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear ofcombustibles. • Make sure the heater, heater cord and extension cord are...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Octane Recommendations • 3.7L V6 engine Regular unleaded gasoline with a pump (R+M)/2 octane rating of 87 isrecommended. Some stations offer fuels posted as Regular with anoctane rating below 87, particularly in high altitude areas. Do not usefuels with octane posted on pump below 87. • 5.0L V8 engi...

Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of a portable fuel container or aftermarket funnel into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto theground instead of filling the tank, which could result in seri...

2. To open the fuel filler door, pressthe center of the rear edge and thenrelease. 3. Slowly insert the fuel filler nozzlefully into the fuel system, and leavethe nozzle fully inserted to openboth doors until you are donepumping. Hold handle higher duringinsertion for easier access. 4. After you are...

AUTOMATIC TRANSMISSION (IF EQUIPPED) WARNING: Always set the parking brake fully and make sure the gearshift is latched in position P. Turn the ignition off and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

Position S Moving the gearshift lever to position: • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower gear operation ...

Note: Some models have a blink feature (if equipped). If manually selecting a gear that is out of the current vehicle speed range, thevehicle will not make the requested shift and will blink the current gear. Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brakelam...

3. Lift the center console upward toaccess the base of the gear shifterassembly and locate the brakeshiftinterlock override lever. 4. Press and hold the lever forwardwhile pulling the gearshift lever outof the P (Park) position and into the N (Neutral) position. 5. Reinstall the console and chrome b...

MANUAL TRANSMISSION (IF EQUIPPED) Using the Clutch Manual transmission vehicles have a starter interlock that preventsstarting the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to thefloor, then put the g...

Recommended Shift Speeds Note: Do not downshift into position 1 when your vehicle is moving faster than 15 mph (24 km/h). This may damage the clutch ortransmission.Upshift according to the following charts.For the 3.7L V6 with 2.73 axle ratio, shift according to the followingchart: Upshifts when acc...

This feature makes it easier to pull away when the vehicle is on a slopewithout the need to use the parking brake. When this feature is active,the vehicle will remain stationary on the slope for two to three secondsafter you release the brake pedal. This allows you time to move your footfrom the bra...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out. Have them inspected by an authorized dealer. If your vehiclehas continuous vibration or shudder in the steering wheel while br...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of your vehicle and may adversely affect theperformance of the AdvanceTrac® system. In...

A Vehicle without AdvanceTrac® skidding off its intended route. B Vehicle with AdvanceTrac® maintaining control on a slipperysurface. USING ADVANCETRAC® The system automatically activates when you start your engine. Theelectronic stability control portion of the system is disabled when thetransmissi...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

warning message appears in the information display and does not allowthe driver to switch the faulted system on. Using the Rear Sensing System The rear sensors are only active when the transmission is in R . As the vehicle moves closer to the obstacle, the rate of the audible warningincreases. When ...

WARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle. WARNING: Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (ife...

Note: The camera may not operate correctly under the following conditions: • Nighttime or dark areas if one or both reverse lamps are notoperating. • The camera’s view is obstructed by mud, water or debris. Clean thelens with a soft, lint-free cloth and non-abrasive cleaner. • The rear of the vehicl...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serio...

STEERING Electric Power Steering WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation. When a system error is detected a steering message willappear in the information display. WARNING: The electric power steering system ha...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehicle weight within its design ratingcapability, with or without a trailer. Properly loading your vehicle willprovide maximum return of vehic...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s pla...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

Hitches Do not use a hitch that either clamps onto the bumper or attaches to theaxle.Distribute the trailer load so 10-15% of the total trailer weight is on thetongue. Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of your vehicle...

Exceeding these limits may allow water to enter vehicle components: • Causing internal damage to the components. • Affecting driveability, emissions, and reliability. Replace the rear axle lubricant anytime the rear axle submerges inwater. Water may have contaminated the rear axle lubricant, which d...

The rear wheels (drive wheels) must be on a tow dolly when towing yourvehicle from the front using wheel lift equipment. This prevents damageto the transmission. The front wheels should be on a tow dolly when towing your vehiclefrom the rear using wheel lift equipment. This prevents damage to thefro...

OPENING THE CONVERTIBLE TOP Note: Do not store articles behind rear seat. Articles stored in the convertible top stowage compartment may break the rear glass windowwhen the top is opened. Note: Opening the convertible top when the top material is wet may cause mold or mildew. The convertible top can...

4. Press and hold the convertibletop switch on the overhead consoleuntil the windows are completelydown and the top is completelystored. USING THE BOOT Installing the Boot WARNING: Always secure the retaining clips and boot straps on the vehicle or the boot may come loose while driving. Note: Be sur...

1. Install the boot on the vehicle by hooking the boot retaining clips onthe back panel. 2. Install the boot on the right side tucking in the front part of the bootin the quarter panel and hooking the retaining clip on the side. 3. Install the boot on the left side tucking in the front part of the b...

3. Fold the right side inward andsecure the boot with the strap. Stow the boot in the trunk. CLOSING THE CONVERTIBLE TOP Note: The convertible top will not operate unless the vehicle is stationary or traveling under 3 mph (5 kmh). Note: Make sure that the latch handles are pulled down and in the ful...

4. Pull down on the drivers latchhandle and rotate it all the wayforward into the windshield header. 5. Press the latch handle up intothe stowed position to secure thelatch. 6. Pull down on the passengers sidelatch handle and rotate it all theway forward into the windshieldheader. 7. Press the latch...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannotslip out of position and interfere with the pedals or impair safeoperation of your vehicle in o...

ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary Roadside Assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. • 24 hours a day, seven days...

Vehicles Sold in the United States: Using Roadside Assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s manualportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, ...

When the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a result, thetransmission may exhibit a combination of firm and soft shifts. Thisoperation is considered normal and will not affect function or durabilityof the transmission....

1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+) terminal of the assisting battery. 3. Connect the negative (-) cable tothe negative (-) terminal of theassisting battery. 4. Make the fi...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 1C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM (CANADAONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

If your vehicle must be serviced while you are traveling or livingin the Middle East, contact the nearest authorized dealer. If theauthorized dealer cannot help you, contact: Ford Middle EastCustomer Relationship Center P.O. Box 21470Dubai, United Arab EmiratesTelephone: +971 4 3326084Toll-Free Numb...

Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer orby contacting Helm, Incorporated using the contact information listedpreviously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle hasa defect which could cause...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in yourvehicle are not working, a fuse mayhave blown. Blown fuses areidentifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located in the lower passenger side area behind thekick panel. Open the trim panel door and remove the fuse cover toaccess the fuses. Use the provided fuse puller tool to remove a fuse. It is located insidethe fuse cover. The fuses are coded as foll...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealerswho are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifie...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood releasehandle located on the driver’s side kick panel. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood and secure it with the prop rod. 234 Maintenanc...

UNDER HOOD OVERVIEW 3.7L V6 Engine A. Battery B. Engine oil dipstick C. Engine oil filler cap D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box A G F E H D C B Maintenance 235 2014 05+ Mustang (197) Owners Guide...

Engine Shield Some vehicles may be equipped with an aero-shield under the engine.Remove the front fasteners of the shield to gain access for service. Thisincludes oil and filter changes. ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Ma...

Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Vehicles driven year-round in non-extreme climates should useprediluted engine coolant for optimum cooling system and engineprotection. What You Should Know About Fail-Safe Cooling If the engine coolant supply is depleted, this feature allows the vehicle tobe driven temporarily before incremental co...

2. Arrange for the vehicle to be taken to an authorized dealer. 3. If this is not possible, wait a short period for the engine to cool. 4. Check the coolant level and replenish if low. WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as n...

Checking and Adding Manual Transmission Fluid (if equipped) 1. Clean the filler plug. It is locatedon the passenger side of thetransmission. 2. Remove the filler plug and inspectthe fluid level. 3. For vehicles equipped with a V6 engine, the correct manual transmission fill level is at the lower edg...

WASHER FLUID CHECK WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather couldresult in impaired windshield vision and increase the risk of injury oraccident. Add flui...

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling. Your vehicle is equipped with a Motorcraft® maintenance-free batterywhich normally does not require additional water during its life ofservice. Note: If your battery has a cover or a...

To prolong the life of the wiper blades, it is highly recommended toscrape off the ice on the windshield before turning on the wipers. Thelayer of ice has many sharp edges and can damage the micro edge of thewiper rubber element. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and or ...

V8 engine 1. Release the clamps that secure the air filter housing cover. 2. Remove the air filter element from the air filter housing. 3. Wipe the air filter housing and cover clean to remove any dirt ordebris and to ensure good sealing. 4. Install a new air filter element. Be careful not to crimp ...

• (1) 8 ft (2.4 m) • (2) Center height of lamp toground • (3) 25 ft (7.6 m) • (4) Horizontal reference line 2. Measure the height from thecenter of your headlamp to theground and mark an 8 ft (2.4 m)horizontal reference line on thevertical wall or screen at this height (a piece of masking tape works...

CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure.Condensation can be a natural by-product of this design. When moist airenters the lamp assembly through the vents, there is a possibility thatcondensation can occur when the temperature is ...

Replacing Fog Lamp Bulbs (V6) (if equipped) 1. Make sure the headlamp control is in the off position and open thehood. 2. Remove the hex head screwsattaching the underbody forwardaeroshield. 3. Remove the underbody forwardaeroshield to gain access to the foglamp assembly. 4. Disconnect the electrica...

REPAIRING MINOR PAINT DAMAGE Your authorized dealer has touch-up paint to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jamb) toan authorized dealer to make sure you get the correct color. • Remove particles, such as bird droppings, tree sap, insect depos...

Premium Quality Windshield Washer Fluid in Canada. Be sure toreplace wiper blades when they appear worn or do not functionproperly. • Do not use abrasives, as they may cause scratches. • Do not use fuel, kerosene, or paint thinner to clean any parts. If you cannot remove those streaks after cleaning...

CLEANING LEATHER SEATS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner. • Clean spills and stains as quickly as possible. • For routine cleaning, wipe the surface with a soft, damp cloth. Formore thorough cleaning, wipe the surface with a mild soap and watersolution. Dry the area wi...

VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time(30 days or more), read the following maintenance recommendations tomake sure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested forreliable, regular driv...

Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up onwindow surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collecte...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. The TireQuality Grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A Thes...

Information on P Type Tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) A. P: Indicates a tire, designated by the Tire ...

G. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional Information Contained on the Tire Sidewall for LT TypeTires LT type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. A. LT: Indicates a tire, designated by the Tire and Rim...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (such as load, speed,inflation pressure) the tires experience throughout their lives.In general, tires should be replaced after six years regardless of treadwear. However, heat c...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be foundon either t...

Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to fiveseconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail ...

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear. Tire Rotation Note: If your tires show uneven wear, ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanicalproblem involved before ti...

USING SNOW CHAINS WARNING: Driving too fast for conditions creates the possibility of loss of vehicle control. Driving at very high speeds for extended periods of time may result in damage to vehicle components. WARNING: Snow tires must be the same size, load index, speed rating as those originally ...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge.See Inflating Your Tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it onthe vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, have an authorized dealer install a new tirepressure monitoring system sensor and valve stem. WARNING: See Tire Pressure Monitoring Syst...

• Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be...

TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. The kit is located in the spare tire well in the trunk. The kit consists ofan air compr...

Do not attempt to repair punctures larger than 1 ⁄ 4 inch (6 millimeters) or damage to the tire’s sidewall. The tire may not completely seal. Loss of air pressure may adversely affect tire performance. For thisreason: • Note: Do not drive the vehicle above 50 mph (80 km/h). • Note: Do not drive furt...

8. Inflate the tire to the pressurelisted on the Tire Label located onthe driver’s door or the door jambarea. Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a highervalue; this is normal and should be no reason for con...

WARNING: The power plug may get hot after use and should be handled carefully while unplugging. Check the air pressure of your tires as follows: 1. Remove the valve cap from the tire valve. 2. Unhook the black hose from the side of the compressor and fastenfirmly on the valve stem by turning clockwi...

Removal of the sealant canister from the temporary mobility kit: 1. Unwrap the clear tube from thecompressor housing. 2. Locate the yellow cap at the endof the clear tube. 3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealan...

Be sure to check the sealantcompound’s use-by date regularly.The use-by date is on the lowerright hand corner of the labellocated on the sealant canister. The sealant canister should be replaced after four years. TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is i...

MOTORCRAFT PART NUMBERS Component 3.7L V6 engine 5.0L V8 engine Air filter element FA-1897 FA-1897 Battery BXT-96R-590 BXT-96R-590 Oil filter FL-500-S FL-500-S Spark plugs 1 SP520 SP519 Cabin air filter FP53 FP53 Windshield wiperblade WW-2201-PF (driver side) WW-2001-PF (passenger side) 1 For spark ...

The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer identifier B. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location C. Make, vehicle line, series, bodytype D. Engine type E. Check digit F. Model year G. Assembly plant ...

Peace of mind • Remote start • Full vehicle covers • Vehicle security systems • Keyless entry keypad • Wheel locks • Locking fuel plug • Bumper mounted parking assist system* *The accessory manufacturer designs, develops and therefore warrantsFord Licensed Accessories, and does not design or test th...

Extended Service Plan PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRSWITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. Only) More than 32 million Ford owners have discovered the powerfulprotection of Ford Extended Service Plan. It is the only extended serviceplan backed by Ford Motor C...

Interest Free Finance Options Available Take advantage of our interest free installment payment plan. Just a 10%down payment will provide you with an affordable, no interest, no feepayment program allowing you all the security and benefits Ford ESPhas to offer while paying over time. You are pre-app...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

AM/FM/CD/SIRIUS SATELLITE RADIO WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. ...

• OK allows you to confirm commands with phone and media features. If your vehicle is equipped with SYNC®, see the SYNC® chapter for more information. • Play/Pause allows you to play or pause a track when listening to aCD. I. AUX: Press this button to access media through your auxiliary input jack. ...

When using SYNC: • Do not operate playing devices if the power cords or cables arebroken, split or damaged. Place cords and cables out of the way, sothey do not interfere with the operation of pedals, seats,compartments or safe driving abilities. • Do not leave playing devices in your vehicle during...

“DIAL” “<number> 0–9” “Asterisk” (*) “Clear” (deletes all entered digits) “Delete” (deletes one digit) “Plus” “Star” Note: To exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu. At any time, you can say the following global commands: GLOBAL COMMANDS “Exit” “H...

Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as access phoneand system settings. You can also access advanced features, such as 911Assist, Vehicle Health Report and SYNC Apps.1. Press ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Sending Text Messages Text messaging is a phone-dependent feature. If your phone iscompatible, SYNC allows you to receive, send, download and delete textmessages.1. Press the PHONE hard button.2. Select the Text Messaging tab, then press Compose.3. Scroll to select from the following options: Send T...

When you select: You can: Modify Phonebook Modify the contents of your phone book(such as add, delete, download). Press OK toselect and scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, langu...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, United States only): ...

Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature. If a crash deploys an airbag (excludes knee airbags and rear inflatablesafety belts [if equipped]) or activates the fuel pump shut-off, your SYNCequipped vehicle m...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button and your vehicle is not equipped with a navigation system,1. Press the phone button to enter the Phone Menu.2. Scroll until Vehicle Health appears in the display, then press OK.3. Select from one of the options listed in the following table. To run a report usi...

Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC Services quick tips Personalizing You can personalize your Services feature toprovide quicker access to your most used orfavorite information. You can sa...

SYNC AppLink™ Note: This feature is only available in the United States. Note: Your smartphone must be paired and connected to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. It is recommended to lock your iPhone afterstarting a...

To Access Using the Navigation Screen (If Equipped) 1. Press the Phone button.2. Press the SYNC Apps tab.3. Press Mobile Apps.4. Select the app to start it. To Access Using Voice Commands 1. Press the voice icon.2. When prompted, say “Mobile Apps”.3. Say the name of the application after the tone.4....

Media Menu Sources and Features The User Device menu allows you to select your media source and howto play your music (by artist, genre, shuffle, repeat, etc.).1. Make sure your USB device is plugged in to your system.2. Press the MEDIA hard button.3. Select the User Device tab, then press Source re...

System Settings System settings provide access to your Bluetooth devices andAdvanced menu features. The Bluetooth menu allows you to add, connect and delete a device aswell as turn the Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages,defaults and perfor...

Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnum...

NAVIGATION CONTROLS Type 1 WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We re...

K. SEEK: • In radio and satellite radio mode, press the arrow buttons to findprevious or next available stations or channels within the currentlyselected Category or Genre. • In CD and DVD modes, press the arrow buttons to select the previousor next track or chapter. L. MENU: • Press this button to ...

Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. Toget the best performance from the touch-sensitive controls: • Make sure your hands are clean and dry. • Since the touchscreen operates based on the touch of a finger, youmay hav...

How To Use Voice Commands with Your System Press the voice icon; after the tone, speak your commandclearly. You can say these commands at any time. “Audio” “Navigation” “CD” “Radio” “Climate” “SYNC” * “Disc” “Tutorial” “Display mode” “User profile” “DVD” “Video CD” “Jukebox” “Voice settings” “Line i...

Confirmation Prompts: The system uses these short questions to confirm your voice request. If turned off, the system simply makes a bestguess as to what you requested. The system may still occasionally askyou to confirm settings. SYSTEM MENU FEATURES Your system offers many menu features, such as al...

If you select: You can: System Settings Language allows you to choose between English, Spanish and French. Units allows you to choose between English and Metric measurements. Keyboard Layout allows you to choose between an ABC and QWERTY keyboard. Delete Stored Items allows you to choose to delete a...

When you select: You can: Set PTY/All Select a category of music you would like tosearch for and then choose to either seek orscan for the stations. ** Note: The system scans the frequency band three times for the chosen program type. Ifthe program type is unavailable in yourreception range, the sys...

When HD Radio is on and you tune to a station broadcasting HD Radiotechnology, you may notice the following indicators on your screen: HD) logo blinks when acquiring a digital station and stays solid when digital audio is playing. When this logo is available, youmay also see Title and Artist fields ...

When you select: You can: Set PTY/All Select a category of music you would like tosearch for and then choose to either seek orscan for the stations. Note: The system scans the frequency band three times for the chosen program type. Ifthe program type is unavailable in yourreception range, the system...

HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

HD Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the...

Sirius® Satellite Radio Voice Commands If you are listening to Sirius satellite radio, press the voicebutton on the steering wheel control. When prompted, say anyof the commands in the following chart. If you are not listening to Sirius satellite radio, press the voice buttonand, after the tone, say...

Sirius® Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such programmingch...

CD Press the MEDIA hard button, and then select the CD tab onthe touchscreen. If there is no disc in the system, NO DISCappears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat,Shuffle, Track List and Record. When you select: Yo...

MP3 Press the MEDIA hard button, and then select the CD tab onthe touchscreen. If there is no disc in the system, NO DISCappears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat,Shuffle, Folder Mode and Folder List. When you sel...

Disc Voice Commands If you are listening to or watching a disc, press the voice buttonon the steering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to or watching a disc, press the voice button and,after the tone, say “Disc”, then any of the co...

Video CD Voice Commands If you are watching a video CD, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not watching a video CD, press the voice button and, after thetone, say “Video CD”, then any of the commands in the fo...

Accessing the Music in Your Jukebox Once you have saved music to your jukebox, you can then choosedifferent ways to play the music.1. Press the MEDIA hard button on the navigation system.2. Select the Jukebox tab on the touchscreen. You can then select from the following options: When you select: Yo...

Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on thetouchscreen.1. Select Options.2. Select Edit Playlists, then which playlist you would like to create.3. Select which category you would like to access from your saved music.4. Select the desired songs and then pre...

User Device If your vehicle is equipped with SYNC, there is a User Device tab. Formore information, see the SYNC chapter. Line In (Auxiliary Input Jack) Your vehicle is equipped with an audio input jack, which allows you toplug a portable audio device into your vehicle’s audio system. To turnthis fe...

Sirius Travel Link Voice Commands Press the voice button and, after the tone, say “Travel Link”,then any of the commands in the following chart: “TRAVEL LINK” “5–day weather forecast” “NBA schedule” “Baseball schedule” “NBA scores” “Baseball scores” “NFL schedule” “College basketball schedule” “NFL ...

Help The Help screen allows you to view basic information about controls anddriving restrictions as well as traffic legend information and basic voicecommands available in various modes. If you select: You can: Basic Operation View hard buttons on your navigation system.Press the desired icon to vie...

Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). FreewayEntrance/Exit Touch this button to select an entrance andexit point to a freeway you select. You can sortthe entrance and exit point alphabetically or inorder of distance ...

Route Selection Screen Icons Icons, located above the route selection choices, represent features onthe routes. A. Freeways B. Toll Roads C. Ferries D. High-occupancy Vehicle Lanes E. Time-restricted Roads F. Avoid Area Selection If you select the fastest route, and the freeways icon is illuminated,...

Within these main categories, there are subcategories, which containmore listings: Subcategories Restaurant Auto Dealership Parking Public Transit Home & Garden Education Personal Care Services Setting Your Navigation Preferences Select settings for the system to take into account when planning ...

Navigation Preferences Calibrate Position allows you to adjust the direction of your vehicle by pressing the arrow buttons onthe screen. Distance allows you to recalibrate the distance to the destination while your vehicleis moving. Restore DefaultSettings Touch the Reset button to return the settin...

North Up always shows the northern direction to be upward on the screen. Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scrollmode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen....

No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may displayunder normal operation in an area with poor GPS access. Map Scale The map display scale has 17 levels, ranging from0.02 miles (.03 kilometers) to 1000 miles (1600 kilomete...

Quick-touch Buttons When in map mode, touch anywhere on the map display to access thefollowing options: When you select: You can: Set as Dest Select a scrolled location on the map as yourdestination. You may scroll the map bypressing your index finger on the map display.When you reach the desired lo...

Symptoms Possible Cause Action A pop-up windowdisplays “Navigationfault. A system faulthas been detected thatmay cause thenavigation to performabnormally. Pleasecontact yourdealership.” There is a systemhardware or softwareerror. Contact an authorizeddealer. A pop-up windowdisplays “Error. PINsdid n...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, a...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

suppliers. The SOFTWARE is licensed, not sold. You may not copy theprinted materials accompanying the SOFTWARE. All title and intellectualproperty rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by appl...

• THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY EXPRESSLY BE PROVIDED FOR YOUR NEW VEHICLE. End user notice Microsoft® Windows® Mobile for Automotive Important SafetyInformation This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of Microso...

Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes inroads, traffic controls or driving conditions. Always use good judgmentand common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to ro...

guidance, fleet management or similar applications; or (b) with or incommunication with any positioning devices or any mobile orwireless-connected electronic or computer devices, including withoutlimitation cellular phones, palmtop and handheld computers, pagers, andpersonal digital assistants or PD...

Agreement in the event that you (i) fail to pay license fees due for theData, or (ii) if any of the following events occur affecting you: (a)voluntary bankruptcy or application for bankruptcy; (b) involuntarybankruptcy or application for bankruptcy not discharged within sixty(60) days; (c) appointme...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay help to increase the value of your vehicle when you sell or trade it.Keep all receipts for comple...

Note: Not all dealers have extended hours or body shops. Please contact your dealer for details. Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its ...

Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed inthe owner manual and in the Ford Workshop Manual. Additionalchemicals or additives not approved by Ford are not recommended aspart of normal maintenance. Please consult your warranty information. Oils, fluids...

NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® – 3.7L and 5.0L Engines Your vehicle is equipped with an Intelligent Oil-Life Monitor thatdetermines when the engine oil needs to be changed based on how yourvehicle is used. By using several important factors in its calculations, th...

Normal scheduled maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level.Consult dealer for requir...

Other maintenance items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 150000 ...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Inspect frequently,service as required Replace cabin air filter (if equipped). Replace engine air filter. Every 5,000 miles(8,000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag. Rotate tir...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a leak is suspected, service is required or the assembly has beensubmerged in water. D...

ENGINE COOLANT CHANGE RECORD 3.7L and 5.0L Engines * Initial change Six years or 100000 miles (160000 km)(whichever comes first) After initial change Every three years or 50000 miles (80000 km) * Shelby GT500 owners: See the Shelby GT500 supplement. Engine Coolant Change Log D EALER V ALIDATION : P&...

911 Assist™ ..............................341 A ABS (see Brakes) .....................176 Accessing call history/phonebook during active call .............333 Accessing the help screen .......404 Accessing the music in yourjukebox ..............................395–396 Accessing your media menufeatur...

Message center ...........................99 display color ............................104english/metric button .............104MyColor display ......................104system check button ..............104warning messages ...........104, 114 Mirrors ...................................87, 89 side vi...

S Safety Belt Maintenance ............42 Safety belts (see Safetyrestraints) ....................................35 Safety defects, reporting ..........224 Safety information ....................326 Safety restraints ....................35–36 Belt-Minder® ............................38extension asse...