Ford 2013 Taurus v.1- User Manual

ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time toget to know your vehicle by reading this manual. The more that youknow about it, the greater the safety and pleasure you will get fromdriving it. WARNING: Always drive with due care and attention when using and ope...

SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety Alert See Owner’sManual ...

DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This potentiallyincludes information about the performance or status of various systemsand modules in the vehicle, such as engine, throttle, st...

CALIFORNIA PROPOSITION 65 WARNING: Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to theState of California to cause cancer and birth defects or otherreproductive harm. PERCH...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Manual that is provided to you along with your Owner’s Manual. Special Instructions For your added safety, your vehi...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infantsortoddlers Children weighing 40 lb (18 kg) or less(generally age four or younger). Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddlerseat). Smallc...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it r...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collision. Use a belt-positioning booster seat for children who ha...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

Perform the following steps when installing the child seat withcombination lap/shoulder belts: Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat. 1. Position the child safety seat in aseat with a combination lap a...

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear a snap and feel the latchengage. Make sure the tongue islatched securely by pulling on it. 5. To put the retractor in theautomatic locking mode, grasp...

Child seat positioning for LATCH lower anchors All the LATCH lower anchors are equally spaced, 11 in. (28 cm) apart,allowing for the following child seat positioning: • If a single child seat is installed using the LATCH lower anchors, it canbe installed at any rear seating position. • If two child ...

4. Clip the tether strap to theanchor as shown. 5. Tighten the child safety seat tether strap according to themanufacturer’s instructions. If your child restraint system is equipped with a tether strap, and thechild restraint manufacturer recommends its use, Ford also recommendsits use. CHILD SAFETY...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue is...

Pregnant women should alwayswear their safety belt. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of thec...

Automatic locking mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt. When to use the automatic locking mode This mode should be used any time a ch...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety beltand increase the risk of injury in a collision. Adjust the height of...

4. For the seating position being disabled buckle then unbuckle thesafety belt three times at a moderate speed, ending in the unbuckledstate. • After Step 4, the safety belt warning light will be turned on for threeseconds. 5. Within approximately seven seconds of the light turning off, bucklethen u...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an air bag supplemental restraint system is provided. The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and ri...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

If you think that the state of the passenger airbag status indicator lamp isincorrect, check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console (if equipped) • Objects hanging off the seat back • Objects stowed in the seatback map pocket...

DO NOT attempt to repair or service the system; take your vehicleimmediately to an authorized dealer. If it is necessary to modify an advanced front airbag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center at the phone number shown in the Customer Assistan...

The system consists of the following: • A label or embossed side panel indicatingthat side airbags are fitted to your vehicle. • Side airbags located inside the seatback ofthe driver and front passenger seatbacks. • Crash sensors and monitoring system with readinessindicator. Refer to Crash sensors ...

Children 12 years old and under should always be properly restrained inthe second or third row seats. The Safety Canopy will not interfere withchildren restrained using a properly installed child or booster seatbecause it is designed to inflate downward from the headliner above thedoors along the si...

The safety belt pretensioners and the airbag supplemental restraintsystem is designed to activate when the vehicle sustains longitudinal orlateral deceleration sufficient to cause the restaints control module todeploy a safety device or when a certain likelihood of a rollover event isdetected by the...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • remotely open the trunk • remotely start or stop the engine (if equipped) • arm and disarm the anti-theft system (if equipped) • activate the panic alarm • activate the global windows (if equipped)...

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with yourvehicle and authorize your vehicle to unlock when commanded (either bytouching the inside of the driver door or front passenger exterior doorhandle, by activating the exterior power liftgate button, or ...

The intelligent access key alsocontains a removable mechanical keyblade that can be used to unlock thedriver door. Slide the release on theback of the transmitter to release thekey blade, then pull the blade out. Note: Your vehicle’s back-up keys were issued with a security tag thatprovides importan...

Programming Memory To the Transmitter To activate this feature: 1. Move the memory features to the desired positions using theassociated controls. A. Type 1 B. Type 2 3. Press and hold button 1 for five seconds. A tone will sound confirmingmemory position has been set. Continue to hold until a secon...

Remote Start (If Equipped) WARNING: To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or areas that are not well ventilated. Note: Do not use remote start if your vehicle is low on fuel. Your vehicle has remote start if the transmitter has this button. The remote star...

Wait at least five seconds before remote starting after an engineshutdown. Only two remote starts are allowed. The ignition must be turned on and then back off or allow one hour topass before using remote start again if additional remote starts aredesired. Turning the Engine Off After Remote Startin...

PRINCIPLES OF OPERATION MyKey 威 allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an “administrator key” or“a...

• Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume.Also, Speed sensitive compensated volume (sscv) feature will bedisabled. • Always on setting. When this is selected you will not be able to disable911 Assist, AdvanceTrac or D...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys as admin keys, use the information display control todo the following:1. Access the main menu and select Set...

In addition to the key that they have already programmed as a MyKey,owners of vehicles equipped with traditional keys may want to programthe non-Ford-approved remote start system as a MyKey if the remotestart fob is used by the MyKey driver. To program a non-Ford-approvedremote start system as a MyK...

Condition Potential Causes I accidentallyprogrammed all keysas restricted keys • The vehicle has a remote start system that is recognized as an admin key. Refer to the Using MyKey with remote start systems section to reset all restricted keys usingremote start. No restricted keyfunctions withintelli...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks A. Unlock B. Lock Remote Control The remote control can be used any time the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock t...

Note: If any door or the luggage compartment is not closed, or if the hood is not closed on vehicles equipped with an anti-theft alarm orremote start, the horn will chirp twice and the lamps will not flash. Opening the Trunk Press the button twice within three seconds to open the trunk. Make sure th...

• the vehicle has then come to a stop and the ignition is turned off or toaccessory; and • the driver door is opened within 10 minutes of the ignition beingturned off or to accessory. Note: The doors will not autounlock if the vehicle has been electronically locked after the ignition is turned off a...

Battery Saver If the courtesy lamps, dome lamps or headlamps are left on, the batterysaver will shut them off 10 minutes after the ignition has been turned off. Accessory Mode Battery Saver for Intelligent Access Keys(If Equipped) If you shut off the engine and leave the ignition in the on or access...

Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory set code. 2. Press the 1 • 2 on the keypad within five seconds . 3. Enter your personal 5-digit code. Each number must be entered withinfive seconds of each other. 4. For memory recall feature, enter the s...

• pressing the unlock button on the remote control • the ignition is turned on • unlocking the vehicle using intelligent access (if equipped) Unlocking and Locking the Doors To unlock the driver’s door: enter the factory set 5-digit code or your personal code. Each number must be pressed within five...

INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and riskinjury. Children should be taught not to play in vehicles. WARNING: Do not le...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting In the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired p...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 Refer to the Cruise Control chapter for information on this feature. INFORMATION DISPLAY CONTROL Refer to the Information Displays chapter for more information. SET RES CNCL ON OFF GAP 84 Steering Wheel 2013 TaurusOwners Guide gf, 1st PrintingUSA (fus)

Cluster Display Control Features If equipped with: MyFord™ system: This control functions the same as the centercontrol on the faceplate. Refer to MyFord system in the Audio Systems chapter. MyFord Touch™: Use this control to adjust the right side of the cluster display. Navigate through the screen ...

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control awayfrom you to increase the speed ofthe wipers. Rotate toward you todecrease the speed of the wipers. RAIN-SENSING WIPERS (IF EQUIPPED) Note: Wet road condit...

Press the end of the stalk toactivate the washer. • A brief press causes a single wipe without washer fluid. • A quick press and hold causes the wipers to swipe three times withwasher fluid. • A long press and hold will activate the wipers and washer fluid for upto 10 seconds. A wipe will occur a fe...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Push the lever toward theinstrument panel again or pull thelever towards you to deactivate. Headlamp Flasher Pull towa...

AUTOLAMPS WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the ...

3. Turn the lighting control to the off position. 4. Turn the vehicle on and then turn the vehicle off. 5. Turn the lighting control to the autolamp position (the headlightsshould turn on). 6. Turn the lighting control to the off position when the desired delaytime (up to three minutes) has been rea...

Activating the system Switch the system on within the information display. See Information displays . Turn the lighting control to theautolamps position. Manually overriding the system When the automatic control hasactivated high beams, pushing orpulling the stalk will provide atemporary override to...

INTERIOR LAMPS Front row map lamps The map lamps are located on theoverhead console. Press the outeredge of the clear lens to turn on thelamps. The map lamps also lightwhen: • any door is opened. • the instrument panel dimmer button is pressed until the courtesy lampcomes on. • the remote entry cont...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in t...

Bounce-Back (One-Touch Up or Down Windows Only) The window will stop automatically while closing and reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back Feature Pull up the window switch and hold within two seconds after the windowreaching the bounce-back position. Th...

A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicatorlight on the button will illuminate. 2. Use the adjustment control to adjust the position of the mirror. 3. Press the mirror button again to deselect ...

Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutboard corner of the exterior mirrors. They are designed to assist youby increasing visibility along the side o...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. SUNSHADE (IF EQUIPPED) The power rear sunshade covers the rear window of the vehicle. The control is located in the centerconsole access bin. Press the control to move the sunshade up or down. Note: Do not try to manually move the...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS These indicators can alert you to a vehicle conditio...

Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certaininstances when using adaptive cruise control and/or the collisionwarning system. It will also illuminate momentarily when you start your vehicle to make sure the display works. High beams Illuminates when...

Safety belt Reminds you to fasten your safety belt. A Belt-Minder 威 chime will also sound to remind you to fasten your safety belt. Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb andto indicate whether th...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take theirfocus off the road. Your primary responsibility is the safe operation of the...

Fuel Economy Distance to E Inst Fuel Econ Average Fuel Compass (located in lower line of display). Note: this will also display in other menus. Total Odometer (located in lower line of display). Note: this will also display in other menus. †See Trip and fuel economy computer later in this section fo...

Settings Display Language Select your applicable language Units Distance Miles and Gallons or km/Lor L/100km Temperature Fahrenheit (°F) or Celsius(°C) Convenience Auto Highbeam AutolampDelay Off or number of seconds Compass Display Calibrate (ifequipped) Hold OK to Calibrate Zone (1–15) DTECalculat...

Inst Fuel Econ Shows instantaneous fuel usage. Average Fuel Indicates the average fuel consumption since the function was last reset. Compass (If Equipped) Displays the vehicle’s heading direction. To calibrate the compass: Enter the compass menu and select Calibrate.Follow the prompts. To set the c...

Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow button toexit a menu. • Press the OK button to chooseand confirm a setting/messages. Main menu...

Fuel Economy Use the left/right arrow buttons to choose the desired fueleconomy display. Fuel Economy Inst Fuel Economy XX. Min Fuel History Instantaneous fuel usage X †Fuel usage over a 5, 10, or30 minute time span X Total odometer (lower left corner) Press and hold OK to reset the currently displa...

Vehicle Auto Highbeam On / Off Autolamp Delay Off or number of seconds Easy Entry/Exit On / Off DTE Calculation Normal / Towing Locks Autolock On / Off Autounlock On / Off RemoteUnlocking All doors / Driver’s door Oil Life Reset Set to XXX % Remote Start Climate Control(using thisfeature allowsyou t...

Alarm/Security Messages Action / Description To Stop Alarm, StartVehicle Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to start or onbefore...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

Keys and Intelligent Access Messages Action / Description Press Brake to Start Displayed when the start/stop button ispressed without the brake pedal being applied.This is a reminder that the brake pedal mustbe applied when the start/stop button ispressed in order to start the engine. Restart Now or...

Passenger Sensing System Message Action / Description Remove Objects NearPassenger Seat Displayed when objects are by the passengerseat. After the objects are moved away fromthe seat, if the warning stays on or continuesto come on contact your authorized dealer assoon as possible. Reminder Messages ...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

Always handle discs by their edges only. Clean the disc with an approvedCD cleaner only, wiping from the center of the disc toward the edge. Donot clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extendedperiods of time. MP3 Track and Folder Structure Audio syst...

MyFord™ SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof the vehicle. W...

When you select: You can: G. OK Allows you to confirm commands with specialphone and media features. If your vehicle isequipped with SYNC, refer to the SYNC chapter for more information. H. Eject Eject the CD. I. Power and Volume Press the power control to turn the system onand off.Turn to adjust th...

AM/FM SINGLE CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe oper...

AM/FM/SINGLE CD SONY 姞 AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe opera...

When you select: You can: C. SOUND Allows you to adjust the sound settings (Treble,Bass, Midrange, Fade and Balance). D. TUNE +/TUNE - In radio mode, you can search the frequency band in individual increments. In SIRIUS mode, you can find the next or previous available SIRIUS satellite station. E. P...

The auxiliary input jack (AIJ) allows you toconnect and play music from your portablemusic player through the vehicle speakers. Youcan use any portable music player designed foruse with headphones. Your audio extensioncable must have male 1/8 in. (3.5 mm)connectors at each end. 1. Make sure the vehi...

MEDIA HUB The media hub is located in the center console and has the followingfeatures: A. A/V inputs B. SD card slot C. USB ports For more information, refer to the MyFord Touch™ material. SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS 威 broadcasts a variety of music, new...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switchthe fan off, the windshield may fog up. B. Defrost: Distributes air through the windshield defroster vents and de-m...

G. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficientthan normal A/C. H. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster ...

DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM Note: You can switch temperature units between Fahrenheit and Celsius. Refer to Menu features in the MyFord Touch or MyLincoln Touch chapter. A. Power/Driver temperature control: Press to turn the climate control system on and off. When the system is off, ou...

Note: Recirculated air engages automatically when MAX A/C is selected or can be turned on manually in any airflow mode except Defrost. F. A/C: Press the button to turn air conditioning on or off. Air conditioning cools the vehicle using outside air. To improve airconditioning when starting your vehi...

E. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficientthan normal A/C. F. A/C: Press the button to turn air conditioning on or off. Air conditioning cools the vehicle using outside air. To improve airconditionin...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C mode, adjust the blower fan speed to the lowest settingand put the vehicle’s transmission into the P (Park) position (vehiclesequipped with an automatic...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C mode, adjust the blower fan speed to the lowest settingand put the vehicle’s transmission into the P (Park) position (vehiclesequipped with an automatic...

CABIN AIR FILTER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter inplace could result in degradation or damage to the system. Your vehicle is equipped with a cabin air filter, which is located just infro...

Manual Climate Systems In hot weather, the climate control system is set to MAX A/C. In moderate weather, the system either heats or cools (based on previoussettings). The rear defroster and/or heated mirrors are not automaticallyturned on. In cold weather, maximum heat is provided in floor/defrost ...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system,resulting in serious injury or death in a crash. Always sit upright againstyour seatback...

Tilting Head Restraints (if equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seatback to an upright driving/ridingposition. 2. Pivot the head restraint forward toward your headto the desired position. After t...

WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, pull onthe seatback to ensure that it has fully latched. An unlatched seat maybecome dangerous in the event...

Note: On vehicles with memory seats, to prevent damage to the seat, the power seats are designed to set a stopping position just short of the endof the seat track. If the seat encounters an object while moving forwardor backward, a new stopping position will be set. To reset the seat to itsnormal st...

Power lumbar (if equipped) Multi-contour Active Motion™ Seat (if equipped) Note: The massage system will turn off after 20 minutes. Note: The engine must be running or the vehicle must be in accessory mode to activate the seats. Note: Allow a few seconds for any selection to activate. The seatback a...

memory position. If the easy entry feature is enabled, the seat will firstmove to the easy entry position. The seat will move to the final positionwhen the key is in the ignition or when the push button start system isput in accessory mode/started. To program the memory feature to a remote control, ...

• Operate the seat heater if water or any other liquid is spilled on theseat. Allow the seat to dry thoroughly. To operate the heated seats: Press the heated seat symbol/button to cycle through thevarious heat settings and off. Warmer settings are indicatedby more indicator lights. HEATED AND COOLED...

Cooled seats The cooled seats will only function when the engine is running. To operate the cooled seats: Press the cooled seat symbol/button to cycle through thevarious cooling settings and off. Cooler settings areindicated by more indicator lights. If the engine falls below 350 rpm while the coole...

To install a filter: 1. First, position the filter in itshousing making sure that the farforward end is all the way up in thehousing. 2. Push in on the center of theoutside edge of the filter and rotateup into the housing until it clips intoposition. REAR SEATS Split-folding rear seat WARNING: Befor...

HOMELINK 姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the...

Erasing the Function Button Codes Note: You can not erase individual buttons. 1. Press and hold the outer twofunction buttons simultaneously forapproximately 20 seconds until theindicator lights above the buttonsflash rapidly. 2. When the indicator lights flash,release the buttons. The codes forall ...

4. Press and release the Genie Intellicode 威 2 transmitter’s previously programmed button. Both LED’s on the garage door opener motor unitshould now flash purple. 5. Press and hold the previously programmed HomeLink 威 button for two seconds. Repeat this step up to three times until the garage door m...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: Do not insert objects other than an accessory plug in...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Note: The appearance and features of the center console may be different than shown based on your vehicle’s option level. Your vehicle may be equipped with a variety of console features. Theseinc...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. Storage Compartments 175 2013 TaurusOwners Guide gf, 1st PrintingUSA (fus)

The fast restart feature allows you to restart your vehicle within20 seconds of switching the vehicle off, if a valid passive key is notpresent. Apply the brake pedal and press the start button for up to20 seconds. After 20 seconds have expired, you can no longer start yourvehicle without the passiv...

If the engine does not start after three attempts, wait 10 seconds andfollow this flooded engine procedure. 1. Select park or neutral. 2. Fully press the accelerator pedal and hold it there. 3. Fully press the brake pedal. 4. Start the engine. Your vehicle may have remote start capability. Refer to ...

We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified byUnderwriter’s Laboratory or Canadian Standards Association. Thisextension cord must be able to be used outdoors, in coldtemperatures, and be clearly marked Suita...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel unt...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

It is best not to alternate repeatedly between gasoline and E85. If you doswitch fuels, it is recommended that you add as much fuel as possible—atleast half a tank. Do not add less than five gallons (18.9L) when refueling.You should drive the vehicle immediately after refueling for at least 5 miles(...

• Normally, adding 1 gallon (3.8L) of fuel is enough to restart theengine. If the vehicle is out of fuel and on a steep grade, more than1 gallon (3.8L) may be required. • The service engine soon indicator may come on. For more informationon the service engine soon indicator, refer to Warning lamps a...

5. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about ten seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. 6. Reinstall the plug (if equipped) into the fuel fill i...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducing fuelusage while coasting...

S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower gear operation ...

If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle ( – ) todownshift the transmission. • Pull the right paddle (+) to upshiftthe transmission. Upshift to the recommended shift speeds according to the followingchart: Upshifts when accelerating (recommended for best...

Brake-Shift Interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepr...

3. Insert the screwdriver (or similartool) into the access hole and presswhile pulling the gearshift lever out ofthe P (Park) position and into the N(Neutral) position. 4. Remove the tool and reinstall theprotective cover. 5. Start the vehicle and release theparking brake. Automatic transmission ada...

condition may be indicated by an AWD Off message in the informationdisplay. If there is an AWD Off message in the message center from usingthe spare tire, this indicator should turn off after reinstalling the repairedor replaced normal road tire and cycling the ignition off and on. It isrecommended ...

Maintenance and Modifications The suspension and steering systems on your vehicle have been designedand tested to provide predictable performance whether loaded or emptyand durable load carrying capability. For this reason, Ford MotorCompany strongly recommends that you do not make modifications suc...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If the vehiclehas continuous vibration or shudder in the steering wheel while ...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac 威 system. In...

USING ADVANCETRAC 姞 The system automatically is enabled when you start your engine. TheESC portion of the system is disabled when the transmission is in R(Reverse) or, on SHO models, if the AdvanceTrac 威 switch is pressed and held for more than five seconds when the brakes are applied and thevehicle...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

The system can be turned off using the information display control. Referto the Information Display chapter. If a fault is present in the system, a warning message appears in the information display and does not allowthe driver to switch the faulted system on. Note: If your vehicle is equipped with ...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 6 mph (10 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

WARNING: Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (ifenabled) have been removed when the trunk is ajar. WARNING: Use caution when turning camera features on or off...

Guidelines and the Centerline Note: Active guidelines and fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Active or Fixed guidelines are on. A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Ye...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot onthe accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

At startup, the system sets the gap to the last selected setting. Onceactivated, the driver can deactivate the system at any time by pressingthe brake pedal, pressing the steering wheel ON/OFF control or pressingthe RES/CNCL control. In addition, the driver can temporarily increasethe vehicle speed ...

Following a Vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision without driverintervention. Always apply the brakes when necessary. Failing to do somay result in...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles atall or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if a vehicle is not detected in front of you. Detection issues can occur: A. When driving on a dif...

Cause Action Heavy rain or snow is interferingwith the radar signals Do not use ACC in these conditionbecause it may not detect, warn,or respond to potential collisions. Swirling water, or snow or ice onthe surface of the road mayinterfere with the radar signals Do not use ACC in these conditionbeca...

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS 威 as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS 威 is not a replacement for careful drivin...

Using the Systems BLIS 威 turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral), thesystem enters CTA mode. Once shifted back into D (Drive), BLIS 威 tu...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS 威 and CTA systems illuminate a yellow alert indicator inthe outside mirror on the side of thevehicle the approach...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS 威 is switched off, the driver does not receive alerts and the information display shows BLIND SPOT SYS OFF and/or CTAS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

Your vehicle is equipped with an electric power-assisted steering system.There is no fluid reservoir to check or fill. If your vehicle loses electrical power while you are driving (or if theignition is turned off), you can steer the vehicle manually, but it takesmore effort. Extreme continuous steer...

CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided. Do notput more than 50 lb (22 kg) in thenet. LOAD LIMIT Vehicle Loading – With an...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle c...

Safety Chains Always connect the safety chains to the vehicle’s hook retainers. Toconnect the safety chains, cross them under the trailer tongue and allowslack for turning corners. If you use a rental trailer, follow the rental agency’s instructions. Note: Never attach safety chains to the bumper. T...

• Shift to a lower gear when driving down a long or steep hill. Do notapply the brakes continuously, as they may overheat and become lesseffective. • If your transmission is equipped with the grade assist feature, use thisfeature when towing. This provides engine braking and helps eliminateexcessive...

Ford Motor Company produces a towing manual for all authorized towtruck operators. Have your tow truck operator refer to this manual forproper hook-up and towing procedures for your vehicle. Front-wheel drive (FWD) vehicles can be towed from the front if properwheel lift equipment is used to raise t...

BREAKING-IN Your vehicle does not need an extensive break-in. Try not to drivecontinuously at the same speed for the first 1,000 miles (1,600 km) ofnew vehicle operation. Vary your speed frequently in order to give themoving parts a chance to break in. Drive your new vehicle at least 1,000 miles (1,...

• Drive a heavily loaded vehicle or tow a trailer. • Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 lb [180 kg] of weight carried). • Add particular accessories to your vehicle (e.g. bug deflectors,rollbars/light bars, running boards, ski racks). • Drive with the wheel...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair ...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

Vehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s informationportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, cal...

FUEL CUT-OFF SWITCH WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected byan authorized dealer after any collision. In the event of a moderate to severe coll...

Preparing Your Vehicle When the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a result, thetransmission may have firm soft shifts, firm shifts or both. This operationis considered normal and will not affect function or durability...

1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+) terminal of the assisting battery. 3. Connect the negative (-) cable tothe negative (-) terminal of theassisting battery. 4. Make the fi...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns, or are unsatisfied with the service youare receiving, follow ...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADAONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

CHANGING A FUSE Fuses If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identified by abroken wire within the fuse. Checkthe appropriate fuses before replacingany electrical components. Note: Always replace a fuse with one that has the specified amperage r...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger compartment fuse panel The fuse panel is located under the instrument panel to the left of thesteering wheel. The fuses are coded as follows. Fuse/Relay Number Fuse Amp Rating Protected Components 1 30A Left front and right rear smart windowmotors 2 15A Driver seat switch power 3 30A Right...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealers thatare there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Maintenance 28...

UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap A I H G F B C D E 282 Main...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. 284 Maintenance 2013 TaurusOwners Guide gf, 1st PrintingUSA (fus)

2.0L EcoBoost™ engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir A H G F E B C D Maintenance 285 2013 TaurusOwners Guide gf, 1st PrintingUSA (fus...

ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into the oilpan...

ENGINE COOLANT CHECK Checking the coolant level The concentration and level of engine coolant should be checked at theintervals listed in scheduled maintenance information. Note: Make sure that the level is at the FULL COLD level or within the COLD FILL RANGE in the coolant reservoir. Note: For best...

Note: Do not use stop leak pellets or cooling system sealants/additives as they can cause damage to the engine cooling and/or heating systems.This damage would not be covered under your vehicle’s warranty. Note: During normal vehicle operation, the engine coolant may change color from orange to pink...

The air conditioning may also cycle on and off during severe operatingconditions to protect overheating of the engine. When the engine coolanttemperature decreases to a more normal operating temperature, the airconditioning will turn on once again. If you notice any of the following: • the engine co...

• The service engine soon indicator will illuminate. • The coolant temperature warning light will illuminate. If the engine reaches a preset over-temperature condition, the engine willautomatically switch to alternating cylinder operation. Each disabledcylinder acts as an air pump and cools the engi...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. The hot coolant is under pressure and may cause serious burns. 5. Re-start the engine and take your vehicle to an authorized dealer. Note: Driving the vehicle without repairing the engine problem increases the chance...

7. Without disconnecting the sensor (4), pull the air filter assembly up todisconnect the air filter assembly from the seated grommets locatedunderneath the air filter assembly. 8. Rotate the air filter assembly 90degrees counterclockwise andreinstall into the rubber hose. 9. Tighten the clamp (1). ...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near thebattery, always shield your face and protect your eyes. Always provideproper v...

Battery relearn Because your vehicle’s engine is electronically controlled by a computer,some control conditions are maintained by power from the battery. Whenthe battery is disconnected or a new battery is installed, the engine mustrelearn its idle and fuel trim strategy for optimum driveability an...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm awayfrom the glass. 2. Squeeze the locking tabs to r...

For EcoBoost™ equipped vehicles: When servicing the air cleaner, it isimportant that no foreign material enter the air induction system. The engineand turbocharger are susceptible to damage from even small particles. Refer to Scheduled Maintenance for the appropriate intervals for changing the air f...

3.5L V6 SHO engine 1. Release the clamps that secure the air filter housing cover. 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. Wipe the air filter housing and cover clean to remove any dirt ordebris and to ensure go...

CHANGING A BULB Lamp assembly condensation Exterior lamps are vented to accommodate normal changes in pressure.Condensation can be a natural by-product of this design. When moist airenters the lamp assembly through the vents, there is a possibility thatcondensation can occur when the temperature is ...

Replacing HID headlamp bulbs (if equipped) The headlamps on your vehicle use a “high intensity discharge” source.These lamps operate at a high voltage. When the bulb is burned out, thebulb and starter capsule assembly must be replaced by your authorizeddealer. Replacing stop/tail/turn and sidemarker...

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

3. If necessary, apply more soap and water solution or cleaning productto a clean, white, cotton cloth and press the cloth onto the soiledarea–allow this to set at room temperature for 30 minutes. 4. Remove the soaked cloth, and if it is not soiled badly, use this cloth toclean the area by using a r...

• Do not use hydrofluoric acid-based or high caustic-based wheelcleaners, steel wool, fuels or strong household detergent. • To remove tar and grease, use Motorcraft 威 Bug and Tar Remover. VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time(30 days or more), read the f...

Removing vehicle from storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up onwindow surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collecte...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A These Tir...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

Information Contained on the Tire Sidewall Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on “T” Type Tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

Inflating Your Tires Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

Tire Replacement Requirements Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as t...

Safety Practices WARNING: If your vehicle is stuck in snow, mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may f...

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear. Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanicalproblem involved before tir...

USING SUMMER TIRES Your Taurus SHO may be equipped with summer tires to provide superiorperformance on wet and dry roads. Summer tires do not have the Mudand Snow (M+S or M/S) tire traction rating on the tire side wall. Sincesummer tires do not have the same traction performance as All-season orSnow...

• Install tire cables securely, verifying that the tire cables do not touchany wiring, brake lines or fuel lines. • Do not exceed 30 mph (48 km/h) with tire cables on your vehicle. • Drive cautiously. If you hear the cables rub or bang against yourvehicle, stop and retighten the cables. If this does...

The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When you believe your system is not operating properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

• Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be given to: • Towing a trailer • Driving ...

Jack at the specified locations to avoid damage to the vehicle. 4. Small arrow-shaped marks on the sills show the location of the jackingpoints. 5. Remove the lug nuts with the lug wrench. 6. Replace the flat tire with the spare tire, making sure the valve stem isfacing outward. Reinstall the lug nu...

TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. Your vehicle may be equipped with a temporary mobility kit (located inthe spare tire we...

General Information WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. Note: Do not use the temporary mobility kit if a tire has become severely damaged by driving the vehicle with a tire that has insufficientair pressure. Only ...

• Never leave the temporary mobility kit unattended when it is operating. • Sealant compound contains latex. Make sure that you use thenon-latex gloves provided to avoid an allergic reaction. • Keep the temporary mobility kit away from children. • Only use the temporary mobility kit when the ambient...

First Stage: Reinflating the Tire with Sealing Compound and Air WARNING: Do not stand directly over the temporary mobility kit while inflating the tire. If you notice any unusual bulges or deformations in the tire’s sidewall during inflation, stop and callroadside assistance. WARNING: If the tire do...

Second Stage: Checking Tire Pressure WARNING: The power plug may get hot after use and should be handled carefully while unplugging. Check the air pressure of your tires as follows: 1. Remove the valve cap from the tire valve. 2. Unhook the black hose from the side of the compressor and fastenfirmly...

What to do after the Tire has been Sealed After using the temporary mobility kit to seal your tire, you will need toreplace the sealant canister and clear tube (hose). Sealing compound andspare parts can be obtained and replaced at an authorized Ford MotorCompany dealership or tire dealer. Empty sea...

Be sure to check the sealantcompound’s “use by” date regularly.The “use by” date is on the lowerright hand corner of the labellocated on the sealant canister (bottle). The sealant canister should be replaced after four years. TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications Retighten the...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 SHO engine 2.0L EcoBoost™ engine Cubic inches 214 214 122 Required fuel See Octane recommendations in the Fuel and Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignitionsystem Coil on plug Coil on plug Coil on plug Spark pluggap 0...

Engine drivebelt routing 3.5L V6 engine 1. Short drivebelt is on first pulleygroove closest to engine (exceptvehicles with electric power assistedsteering). 2. Long drivebelt is on second pulleygroove farthest from engine. 3.5L V6 SHO engine 2.0L EcoBoost™ engine Capacities and Specifications 355 20...

Motorcraft part numbers Component 3.5L V6 engine 3.5L V6 SHO engine 2.0L EcoBoost™ engine Air filterelement FA-1884 FA-1884 FA-1884 Oil filter BXT-59 BXT-65-650 BXT-65-650 Battery FL-500-S FL-500-S FL-910-S Spark plugs SP-520 1 SP-528 1 SP-527 1 Cabin air filter FP68 FP68 FP68 Windshieldwiper blade ...

The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer identifier B. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location C. Make, vehicle line, series, bodytype D. Engine type E. Check digit F. Model year G. Assembly plant ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind” protectionbeyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

Convenience Many dealerships have extended evening and Saturday hours to makeyour service visit more convenient and they offer one stop shopping.They can perform any services that are required on your vehicle, fromgeneral maintenance to collision repairs. Note: Not all dealers have extended hours or...

Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed inthis book and in the Workshop Manual. Additional chemicals or additives not approved by Ford and are not recommended as part ofnormal maintenance. Please consult your Warranty Manual for complete warranty inf...

Normal Scheduled Maintenance - At every oil change interval as indicated by the message center Change engine oil and filter Rotate tires, inspect tire wear and measure tread depth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (if equipped with dipstick);cons...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Extensive idling and/or low-speed driving for long distances as in heavy commercial use (i.e. delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated bymessage center and perform services listed in theNormal Scheduled Maintenance chart Inspect frequently,service a...

Police Interceptor equipped with engine idle hour meter Inspect frequently,service as required Replace cabin air filter (if equipped) Every 5,000 miles(8,000 km) Inspect the brake system Lubricate control arm and steering ball joints ifequipped with grease fittings Rotate tires, inspect tires for we...

ENGINE IDLE HOUR METER (IF EQUIPPED): Your vehicle may be equipped with an idle meter to indicate how muchtime the vehicle is idling in P (Park) or N (Neutral). The meter isincorporated with the vehicle odometer. Depressing the odometer-resetbutton once will display the trip odometer (miles [km] fol...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Edge/MKX AWD only – vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent o...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it withSYNC 威 . Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30 am-8pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–...

Privacy Information When a cellular phone is connected to SYNC 威 , the system creates a profile within your vehicle that is linked to that cellular phone. Thisprofile is created in order to offer you more cellular features and tooperate more efficiently. Among other things, this profile may containd...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

2. Scroll to cycle through the following options: Pre-defined text message options Be there in 10 minutes Be there in 20 minutes Call me Call you later Can’t talk right now Can’t wait to see you I love you I need more directions I’m stuck in traffic No Thanks Too funny Where R you? Why? Yes 9. Press...

Note: SYNC does not automatically download all of your unread text messages at every ignition cycle (as it does with call history andphonebook if automatic download is set to on). Return exits the current menu when you press OK. Accessing Your Phone Settings These are phone-dependent features. Your ...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. “Push” the desiredcontact(s) on your phone. Refer to yourphone’s user guide on how to ...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as “primary” as well as turn your Bluetooth feature on and off. Th...

If you select: You can: Connect BluetoothDevice Connect a previously pairedBluetooth-enabled phone.1. Press OK to select and view a list ofpreviously paired phones.2. Scroll until the desired device is chosen,then press OK to connect the phone. Note: Only one device can be connected at a time. When ...

Advanced Menu Options This menu allows you to access settings such as prompts, languages,defaults, perform a master reset, install an application and view systeminformation.1. Press the phone button to enter the Phone Menu.2. Scroll until System Settings appears and press OK.3. Scroll until Advanced...

5. Press OK when the desired option appears in the radio display. Set On or Set Off appears in the display as confirmation. Off selections include: Off with reminder and Off without reminder. Offwith reminder provides a display and voice reminder at phone connectionat vehicle start. Off without remi...

911 Assist™ May Not Work If • Your cellular phone or 911 Assist™ hardware was damaged in a crash. • The vehicle’s battery or SYNC system has no power. • The phone(s) paired and connected to the system was thrown fromthe vehicle. 911 Assist™ Privacy Notice Once 911 Assist™ is set on, it may disclose ...

Vehicle Health Report Privacy Notice When you run a Vehicle Health Report, Ford Motor Company may collectyour cellular phone number (to process your report request) and diagnosticinformation about your vehicle. Certain versions or updates to Vehicle HealthReport may also collect additional vehicle i...

2. Follow the voice prompts to select your destination. Once your destination is selected, your current vehicle location is uploaded anda route based on current traffic conditions is calculated and sent backto your vehicle. After the route download is complete, the phone callis automatically ended. ...

SYNC Services Quick Tips Portable Your subscription is associated with yourBluetooth-enabled cellular phone number, notyour VIN (Vehicle Identification Number). Youcan pair and connect your phone to anyvehicle equipped with Traffic, Directions andInformation and continue enjoying yourpersonalized se...

“USB” “Play previous folder” 2 “Play previous track” “Play song <name>” 1 “Play track <name>” 1,3 “Refine album <name>” 1,3 “Refine artist <name>” 1,3 “Refine song <name>” 1 “Refine track <name>” 1,3 “Repeat off” “Repeat on” “Search album <name>” 1,3 “Search...

Press the voice icon and when prompted say “Bluetooth Audio” and thenany of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to playyour m...

When you select: You can: Select Source Select and play music from your USB port,auxiliary input jack (line in) or stream musicfrom your Bluetooth-enabled phone.Press OK to select, then scroll to choose from: USB: Press OK to access music plugged intoyour USB port. You can also plug in devices tocha...

Accessing Your Play Menu This menu allows you to select and play your media by artist, album,genre, playlist, track, similar music or even to explore what is on yourUSB device.1. Make sure that your device is plugged into the USB port and is turned on. 2. Press AUX and then MENU to enter the Media M...

When you select: You can: Explore USB Explore all supported digital media on yourmedia device connected to the USB port. Youcan only view media content which iscompatible with SYNC; other files saved arenot visible.Press OK to select. Then scroll to exploreindexed media on your flash drive. Similar ...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Phone issues Issue Possible Cause(s) Possible Solution(s) I’m having troubleconnecting myphone to SYNC. This is a phonedependentfeature, ORPossible phonemalfunction. Go to the website to review yourphone’s compatibility.Try turning off the device,resetting the device or removingthe device’s battery,...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the vehicle...

Press to access your home screen. Depending on your vehicle’s option package and software, yourscreens may vary in appearance from the screens shown in this section. Your features may also be limited depending on your market.Check with your authorized dealer for availability. Customizing Your Home S...

• SOUND: Touch the word to access the Sound menu where you can makeadjustments to settings such as: Bass, Treble, Midrange, Balance andFade, THX Deep Note Demo (if equipped), DSP (if equipped),Occupancy Mode (if equipped), and Speed Compensated Volume settings. • Hazard flasher: Press the button to ...

Navigation Climate You can make selections from the menu by using the OK button ortouching the screen. If you make a selection by touching the screen, theselection menu expands and you are allowed different options. • Press the up and down arrows to scroll through the modes. • Press the right arrow ...

What Can I Say? To access the available voice commands for the current session, do oneof the following: • During a voice session, press the lower left status bar of the screen,OR • Say “What can I say?” for an on-screen listing of the possible voicecommands associated with your current voice session...

Helpful Hints • Make sure the interior of the vehicle is as quiet as possible. Wind noisefrom open windows and road vibrations may prevent the system fromcorrectly recognizing spoken commands. • After pressing the voice icon, wait until after the tone sounds and“Listening” appears before saying a co...

LISTENING TO MUSIC Your system offers many media options. You can access these optionsusing the touchscreen or voice commands. Browse Voice Commands When listening to any type of audio, you can browse through otherdevices without having to change sources. For example, if you arecurrently listening t...

When you select: You can: Options Adjust more audio system settings: Sound Settings allows you to adjust Bass, Treble, Midrange, Balance and Fade, THXDeep Note Demo (if equipped), DSP (ifequipped), Occupancy Mode (if equipped),and Speed Compensated Volume settings. Set PTY for Seek/Scan allows you t...

When this feature is enabled and you are tuned to a station broadcastingHD Radio technology, you may notice the following indicators on yourscreen: HD) logo blinks when a digital station is being acquired and is solidwhen digital audio is playing. Whenthis logo is available, you may alsosee Title an...

HD Radio Reception/Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broadcast...

See the following chart for potential station issues. Potential station issues Issue Cause Action Echo, stutter, skip orrepeat in audio.Increase or decreasein audio volume. Poor time-alignmentby the radiobroadcaster. None - broadcastissue. Sound fading orblending in and out The radio is shiftingbetw...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the f...

“TUNE” “<530–1710>” “AM” “AM <530–1710>” “AM Preset <#>” “AM Autoset” “AM Autoset Preset <#>” “<87.9–107.9>” “FM” “FM1” “FM2” “FM <87.9–107.9>” “FM Preset <#>” “FM 1 Preset <#>” “FM 2 Preset <#>” “FM Autoset” “FM Autoset Preset <#>” “<87...

SIRIUS 姞 Satellite Radio Voice Commands If you are listening to SIRIUS 威 satellite radio, press the voice button on the steering wheel controls. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS 威 satellite radio, press the voice button and, after the t...

SIRIUS 威 troubleshooting tips Radio Display Condition Possible Action No Signal Loss of signal from theSIRIUS 威 satellite or SIRIUS 威 tower to the vehicle antenna. The signal is currentlybeing blocked. Whenyou move into an openarea, the signal shouldreturn. Updating Update of channelprogramming inpr...

CD Voice Commands If you are listening to a CD, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to a CD, press the voice button and, after thetone, say “CD”, then any of the commands in the following chart. ...

SD Card Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. The card slot can be used for your navigation card (if equipped) or for acard which contains music. The slot is...

To view song information such as Title, Artist, File, Folder, Album, andGenre, touch the on-screen album art. You can also press What’s Playing to hear how the system pronounces the current band and song. This can be helpful when using voicecommands to make sure the system correctly plays your reque...

To view song information such as Title, Artist, File, Folder, Album, andGenre, touch the on-screen album art. You can also press What’s Playing to hear how the system pronounces the current band and song. This can be helpful when using voicecommands to make sure the system correctly plays your reque...

Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers fromyour connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, thenselect the BT tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth Audio device,...

Phone Menu Options Press the top left corner on your touchscreen to select from thefollowing options: When you select: You can: Phone Access the on-screen numerical pad to enter anumber and place a call.During an active call, you can also choose tomute the call, put it on hold, activate privacy(retu...

When you select: You can: Messaging send text messages using your touchscreen.Refer to Text messaging later in this section. Settings Access various phone settings such asBluetooth on or off, Manage your Phone Bookand more. Refer to Phone settings later in this section. Text Messaging Note: Download...

Phone Settings Press Phone > Settings, or Menu > Settings > Phone, then select fromthe following settings: If you select: You can: Bluetooth Devices Connect, disconnect, add or delete a device,as well as save it as a favorite. Bluetooth on/off Turn Bluetooth on or off. Do not disturb Have a...

1. Select Connect to Services to initiate an outgoing call to SYNC Services using your phone. 2. Once connected, follow the voice prompts to request your desired Service such as Traffic or Directions. You can also say “What are mychoices?” to receive a complete list of available services from whicht...

Disconnecting from SYNC 姞 Services 1. Press and hold the phone button on the steering wheel.2. Say “Goodbye” from the SYNC Services main menu. TDI options Personalizing You can personalize your services feature toprovide quicker access to your most used orfavorite information. You can save address p...

When you select: You can: Sports Info. View scores and schedules from a variety ofsports. You can also save up to 10 favorite teamsfor easier access. The score automaticallyrefreshes when a game is in progress. Movie Listings View nearby movie theaters and their show times(if available). Ski Conditi...

Calendar Press the information button, then select Calendar. You canview the current calendar by day, week or month. 911 Assist™ (If Equipped) WARNING: Unless the 911 Assist™ setting is set on prior to a crash, the system will not dial for help which could delay response time, potentially increasing...

MENU FEATURES Under the menu setting, you can set your clock, access and makeadjustments to the display, sound and vehicle settings as well as accesssettings for specific modes or the help feature. Setting the Clock Note: The date is set by your vehicle’s GPS; you cannot manually set the date. Note:...

Photo Display Limitations Only the photograph(s) which meet the following conditions aredisplayed: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp • Each file must be 1.5 MB or less. • Recommended dimensions: 800 x 378 Photographs with extremely large dimensions (i.e., 2048 x 1536) ...

Valet Mode Note: If you are locked out and need to reset the PIN, you can enter 3681 and the system unlocks. Valet mode allows you to lock the system so that none of yourinformation on the system can be accessed until it is unlocked with thecorrect PIN.1. Press Menu > Vehicle > Valet Mode.2. S...

Voice Settings Customize the level of system interaction, help and feedback. Press Menu > Settings > Voice. Voice settings Interaction Mode Standard interaction mode provides moredetailed interaction and guidance.Advanced mode has less audible interactionand more tone prompts. ConfirmationProm...

• Gracenote Media Management on/off: When turned on, this feature will pull in metadata information from the Gracenote Database for yourmusic files. This will override information from your device. Thisfeature defaults to off. • Gracenote Cover Art on/off: When turned on, this feature will pull in c...

To access, press Menu > Settings > Wireless and Internet > Wi-Fisettings, then select from the following options: If you select: You can: Wi-Fi Network(Client) Mode On/Off Turn the Wi-Fi feature on or off in yourvehicle. Make sure that On is selected forconnectivity purposes. Choose a Wirel...

Help! Your touchscreen system has a help feature which you can access at anytime. To access Help using the touchscreen, press Menu > Help, the choosefrom the following: If you select: You can: Where Am I? View the vehicle’s current location.If your vehicle is equipped with navigation,you see your...

TOUCHSCREEN CLIMATE CONTROLS Press the lower right corner on the touchscreen to access yourclimate control features. Depending on your vehicle line andoption package, your climate screen may look different than what is shown here. A. Power: Touch to turn the system on and off. Outside air cannot ent...

Additional climate control voice commands “Floor On” “Windshield Floor On” “Temperature High” “Temperature Low” “Fan Increase” “Fan Decrease” “Temperature”* “Temperature Increase” “Temperature Decrease” “Temperature <15.5–29.5> degrees” “Temperature <59–86> degrees” “My Temp” “Help” *If ...

When you are viewing additional information for hotels, cityseekr willalso tell you if the hotel has certain services and facilities using icons: Hotel services and facilities Restaurant 24 Hr Room Service Business Center Fitness Center Handicap Facilities Internet Access Laundry Pool Refrigerator W...

Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press Menu > Settings > Navigation. When you select: You can: Map Preferences Turn breadcrumbs on and off. Choose how you want to view the turn list(top-to-bottom or bottom-to-top)....

When you select: You can: Traffic Preferences Choose how you want the system to handletraffic problems along your route.Automatic: Have the system reroute you toavoid traffic incidents that develop and impactthe current route (no notification isprovided).Manual: Have the system always provide atraff...

Change the appearance of thedisplay by repeatedly pressing thearrow in the upper left corner of thescreen. Heading up always shows the direction of forward travel to be upward on the screen. This view is available for map scales up to2.5 mi (4 km). For larger map scales, this setting is remembered,b...

Quick-Touch Buttons When in map mode, touch anywhere on the map display to access thefollowing options: When you select: You can: Set as Dest Select a scrolled location on the map as yourdestination. (You may scroll the map bypressing your index finger on the map display.When you reach the desired l...

“DESTINATION” “<Nametag>” “<POI Category>” “Favorites” “Home” “Intersection” “Nearest <POI Category>” “Nearest POI” “Play Nametags” “POI Category” “Previous Destination” “Street Address” “Help” “NAVIGATION” “Destination”* “Zoom City” “Zoom Country” “Zoom in Minimum” “Zoom out Maxim...

GENERAL INFORMATION SYNC 姞 End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of Microsoft Corporation(“MS”). Those installed software products of MS origin, as well asassociated media, printed materials, ...

DEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE on your DEVICEto access their content. If you decline an upgrade, you will not be ableto access content that requires the up...

laws and treaties. This EULA grants you no rights to use such content.All rights not specifically granted under this EULA are reserved by MS,Microsoft Corporation, FORD MOTOR COMPANY, third party softwareand service providers, their affiliates and suppliers. Use of any on-lineservices which may be a...

End user notice Microsoft 姞 Windows 姞 Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to ManufacturerFORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant toa license agreement. Any removal, reproduction, reverse engineering...

other data used for the TeleNav Software. Such data may not alwaysreflect reality due to, among other things, road closures, construction,weather, new roads and other changing conditions. You are responsiblefor the entire risk arising out of your use of the TeleNav Software. Forexample but without l...

8.3 By using the TeleNav Software, you consent to receive from TeleNavall communications, including notices, agreements, legally requireddisclosures or other information in connection with the TeleNav Software(collectively, “Notices”) electronically. TeleNav may provide such Noticesby posting them o...

INABILITY TO USE THIS DATA, ANY DEFECT IN THIS DATA, OR THEBREACH OF THESE TERMS OR CONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVENIF NT OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITYOF SUCH DAMAGES. Some States, Territories and Countries do notallow certain l...

furnished shall be marked and embedded as appropriate with thefollowing “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, IL 60606. This Data is...

911 Assist™ ...................... 408, 488 A ABS (see Brakes) ..................... 205 Accessing and using yourUSB port .................................... 467 Accessing call history/phonebook during active call ............. 398 Accessing your calendar .......... 488 Accessing your media menufea...

Lubricant specifications ........... 356 Lug nuts .................................... 353 M Making and receiving calls ....... 475 MAP DVD - Loading andUnloading .................................. 475 Map icons .................................. 511 Map mode .................................. 510 M...