Ford 2013 Focus v.2- User Manual

may access or share among them data for vehicle improvement purposes.For U.S. only (if equipped), if you choose to use the SYNC® VehicleHealth Report, you consent that certain diagnostic information may alsobe accessed electronically by Ford Motor Company and Ford authorizedservice facilities, and t...

and Ford of Canada do not access event data recorderinformation without obtaining consent, unless pursuant to courtorder or where required by law enforcement, other governmentauthorities or other third parties acting with lawful authority.Other parties may seek to access the information independentl...

PERCHLORATE MATERIAL Note: Certain components in your vehicle, such as airbag modules, safety belt pretensioners, and remote control batteries, may containperchlorate material. Special handling may apply for service or vehicleend of life disposal. See www.dtsc.ca.gov/hazardouswaste/perchlorate formo...

Warranty on Replacement Parts Genuine Ford and Motorcraft replacement parts are the onlyreplacement parts that benefit from a Ford Warranty. Damage caused toyour vehicle as a result of the failure of non-Ford parts may not becovered by the Ford Warranty. For additional information, see the termsand ...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Smallchildren Children who have outgrown or nolonger properly fit in a child safetyseat (generally children who are lessthan 4 ft. 9 in. (1.45 m) tall, aregreater than age four (4) and les...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduc...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

Perform the following steps when installing the child seat withcombination lap and shoulder belts: Note: Although the child seat illustrated is a forward-facing child seat, the steps are the same for installing a rear-facing child seat. 1. Position the child safety seat in aseat with a combination l...

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear a snap and feel the latchengage. Make sure the tongue islatched securely by pulling on it. 5. To put the retractor in theautomatic locking mode, grasp...

This is necessary to remove the remaining slack that will exist once theextra weight of the child is added to the child restraint. It also helps toachieve the proper snugness of the child seat to your vehicle.Sometimes, a slight lean toward the buckle will additionally help toremove remaining slack ...

The LATCH system is composed of three vehicle anchor points: twolower anchors located where your vehicle seat back and seat cushionmeet (called the seat bight) and one top tether anchor located behindthat seating position. LATCH compatible child safety seats have two rigid or webbing mountedattachme...

Use of Inboard Lower Anchors from the Outboard SeatingPositions (Center Seating Use) Note: The standardized spacing for LATCH lower anchors is 11 inches. (28 centimeters) center to center. Do not use LATCH lower anchors forthe center seating position unless the child seat manufacturer’sinstructions ...

The rear seats of your vehicle are equipped with built-in tether strapanchors located behind the seats as described below. Four door: The tether anchors in your vehicle are located under a covermarked with the tether anchor symbol (shown with title). Five door: The tether anchors in your vehicle are...

3. Open the tether anchor cover. 4. Clip the tether strap to theanchor as shown. If the tether strap is clippedincorrectly, the child safety seatmay not be retained properly in theevent of a collision. 5. Tighten the child safety seat tether strap according to themanufacturer’s instructions. If the ...

3. Clip the tether strap to theanchor as shown. If the tether strap is clippedincorrectly, the child safety seatmay not be retained properly in theevent of a collision. 4. Tighten the child safety seat tether strap according to themanufacturer’s instructions. If the safety seat is not anchored prope...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a ch...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety beltand increase the risk of injury in a crash. Adjust the height of the...

If... Then... The driver’s or frontpassenger’s safety belt becomesunbuckled for about oneminute while the vehicle istraveling at least 6 mph(9.7 km/h) and more than1-2 minutes have elapsed sincethe ignition switch has beenturned to on... The Belt-Minder® feature is activated- the safety belt warning...

3. For the seating position being disabled, buckle then unbuckle thesafety belt four times at a moderate speed, ending in the unbuckledstate. • After Step 3, the safety belt warning light will turn on. 4. While the safety belt warning light is on, buckle and then unbuckle thesafety belt. • After Ste...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The driver and front passengerairbags will deploy during significantfrontal and near-frontal crashes. The driver and passenger front airbag system consists of: • driver and passenger airbag modules • crash sensors and monitoring system with readinessindicator. See Crash Sensors and Airbag Indicator ...

WARNING: Any alteration/modification to the front passenger seat may affect the performance of the front passenger sensing system. This system works with sensors that are part of the front passenger’sseat and safety belt to detect the presence of a properly seated occupantand determine if the front ...

• Objects placed on the occupant’s lap • Cargo interference with the seat • Other passengers pushing or pulling on the seat • Rear passenger feet and knees resting or pushing on the seat The conditions listed above may cause the weight of a properly seatedoccupant to be incorrectly interpreted by th...

KNEE AIRBAG A driver’s knee airbag is located under or within the instrument panel.During a crash, the restraints control module may activate the driver’sknee airbag based on crash severity and occupant conditions. Undercertain crash and occupant conditions, the driver’s knee airbag maydeploy but th...

The side airbags are located on the outboard side of the seat backs ofthe front seats. In certain lateral crashes, the airbag on the side affectedby the crash will be inflated. The airbag was designed to inflate betweenthe door panel and occupant to further enhance the protection providedoccupants i...

• a flexible headliner which opens above the side doors to allow side aircurtain deployment. • crash sensors and monitoring system with readinessindicator. See Crash sensors and Airbag Indicator later in this chapter. Children 12 years old and under should always be properly restrained inthe back se...

A difficulty with the system is indicated by one or more of the following: • The readiness light will either flash or stay lit. • The readiness light will not illuminate immediately after theignition is turned on. • A series of five beeps will be heard. The tone pattern will repeatperiodically until...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • arm and disarm the anti-theft system • remotely open the luggage compartment • unlock the doors without actively using a key or remote control(intelligent access only). GENERAL INFORMATION ON RADIO...

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with yourvehicle and authorize your vehicle to unlock when one of the followingconditions is met: • You touch the inside of the front exterior door handle. • You press the luggage compartment button. • You press...

Type 2 To release the key blade, slide therelease on the back of thetransmitter, then pull the blade out. Note: Your vehicle’s back-up keys were issued with a security tag thatprovides important vehicle key cutinformation. Keep the tag in a safeplace for future reference. Replacing the Battery Note:...

5. Carefully pry out the battery with a flat object. 6. Install a new battery with the + facing downward. 7. Assemble the two halves of the transmitter back together. 8. Install the key blade. Intelligent Access Key (Type 2) 1. Remove the backup key from the transmitter. 2. Twist a thin coin under t...

Sounding a Panic Alarm (If Equipped) Press the button to activate the alarm. Press the button againor switch the ignition on to deactivate. Note: The panic alarm will only operate when the ignition is off. Remote Start (If Equipped) WARNING: To avoid exhaust fumes, do not use remote start if your ve...

Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to the vehicle than when starting due toground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through theinformati...

PRINCIPLES OF OPERATION MyKey® allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an administrator key or admin...

• 45, 55 or 65 mph (75, 90, or 105 km/h) vehicle speed warning. Driversreceive visual warnings and an audible tone when they exceed thepreselected vehicle speed. • 45% of the maximum audio system output. The audio system displaysa message when drivers attempt to exceed the volume limits. • AdvanceTr...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys (which removes all restrictions and returns them toadmin key status), use the information display controls t...

In addition to the key that has been programmed as a MyKey, owners ofvehicles equipped with traditional keys have the option to program thenon-Ford-approved remote start system as a MyKey if the remote startfob is used by the MyKey driver. To program a non-Ford-approved remote start system as a MyKe...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks The power door lock control islocated on the instrument panelnear the radio. Press the control to lock or unlock thedoors. It will illuminate when you lockthe doors and...

Right-Hand Side Turn counterclockwise to lock. Remote Control You can use the remote control anytime the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Type 1 Type 2 Press the button to unlock the driver door. Press the button again within three seconds to unlock all doors. The turns...

Opening the luggage compartment Press twice to open the luggage compartment. Ensure that the trunk is closed and latched before driving your vehicle.Failure to properly latch the trunk may cause objects to fall out or blockthe driver’s rear view. Activating Intelligent Access (If Equipped) The intel...

Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of yourvehicle if your key is still in the ignition. When you open one of the front doors and lock your vehicle with thepower door lock control, all the doors will lock then unlock if your ke...

Autolock and Unlock (If Equipped) The autolock feature will lock all the doors when: • all doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle attains a speed greater than 4 mph (7 km/h). When you enable autounlock, all doors will unlo...

The lights will not turn off if: • you turn them on with the dimmer control, or • any door is open. Illuminated Exit The interior lamps and select exterior lamps illuminate when all doorsare closed and you switch, the ignition off and remove the key from theignition (integrated keyhead transmitter o...

From Outside Your Vehicle Press the release button locatedabove the license plate. Your vehiclemust be unlocked or the intelligentaccess transmitter must be within3 feet (1 meter) of the trunk. Note: On a locked vehicle, you can press the trunk button on the remote control once. The vehicle will rem...

If the key has been successfully programmed it will start the engine andoperate the remote entry system (if the new key is an integratedkeyhead transmitter). If it was not programmed successfully, wait 10 seconds and repeatSteps 1 through 8. If you are still unsuccessful, bring your vehicle toyour a...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL (IF EQUIPPED) Select the required source on the audio unit. You can operate the following functions with the control: Type 1 A. Volume up B. Seek up or next C. Volume down D. Seek down or previous E. Mode Press M to select the audio source. Type 2 A. Volume up B. Seek up or next C. Vol...

VOICE CONTROL (IF EQUIPPED) Pull the control to select or deselect voicecontrol. See the SYNC or MyFord Touch chapter. MyFord Touch Controls (If Equipped) Your steering wheel controls may also have these additional features. Press to go to the home screen. Press to go to the information screen. CRUI...

INFORMATION DISPLAY CONTROL Use the arrows on the left side ofthe steering wheel to navigate theinformation display. See the Information Displays chapter for more information. Multimedia Controls (If Equipped) Use the arrows on the right side of steeringwheel to navigate through the available menus....

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, i...

WINDSHIELD WASHERS Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat. The washer will spray for as longas the lever is pulled toward you.After you release the lever, thewipers will operate for a shorttime. A wipe will occur a few seconds ...

Rear Window Washers Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat. The washer will spray for as longas you push the lever away fromyou. When you release the lever,the wiper will operate for a shorttime. Wipers and Washers 87 2013 Focu...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams Push the lever forward to switchthe high beams on. Push the lever forward again or pullthe lever toward you to switch thehigh beams off. Headlamp Flasher Pull the lever toward y...

AUTOLAMPS (IF EQUIPPED) Note: It may be necessary to switch your headlamps on manually in severe weather conditions. The headlamps will switch on andoff automatically in low lightsituations or during inclementweather. The headlamps will remain on for aperiod of time after you switch theignition off....

Vehicles Without Front Fog Lamps A. Press repeatedly or press andhold to dim. B. Press repeatedly or press andhold to brighten. HEADLAMP EXIT DELAY After you switch the ignition off, you can switch the headlamps on bypulling the direction indicator lever toward you. You will hear a shorttone. The he...

FRONT FOG LAMPS Press the control to switch the foglamps on or off. You can switch the fog lamps onwhen the lighting control is in anyposition except off and the highbeams are not on. DIRECTION INDICATORS Push the lever up or down to usethe direction indicators. Note: Tap the lever up or down to mak...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the ...

Window Lock Press the control to lock or unlock the rearwindow controls. It illuminates when you lockthe rear window controls. Bounce-Back (If Equipped) The window will stop automatically while closing. It will reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back Featu...

Signal Indicator Mirrors (If Equipped) The outer portion of the appropriate mirror housing blinks when youactivate the turn signal. Integrated Blind Spot Mirrors WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the ...

The moonroof has a one-touch open and close feature. To stop motionduring one-touch operation, press the control a second time. The moonroof control is located on theoverhead console. Opening and Closing the Moonroof Press and release the rear of the control to open the moonroof. If thesliding shade...

Safety Mode The system enters a safety mode when it detects a malfunction. Themoonroof will move about 0.5 seconds at a time and then stop again.Press the switch repeatedly until the moonroof is closed. Have thesystem checked by your authorized dealer immediately. 100 Windows and Mirrors 2013 Focus ...

GAUGES A. Information display. See Information Displays for more information. B. Speedometer C. Engine coolant temperature gauge D. Fuel gauge E. Tachometer Engine coolant temperature gauge Shows the temperature of the engine coolant. At normal operatingtemperature, the needle will remain in the cen...

Fuel gauge Switch the ignition on. The fuel gauge will indicate approximately howmuch fuel is left in the fuel tank. The fuel gauge may vary slightly whenthe vehicle is moving or on a gradient. The arrow adjacent to the fuelpump symbol indicates on which side of your vehicle the fuel filler dooris l...

Fog Lamps – Front (if equipped) It will illuminate when you switch the front fog lamps on. High Beam It will illuminate when the headlamp high beam is switched on.It will flash when you use the headlamp flasher. Information It will illuminate when a new message is stored in theinformation display. I...

Parking Lamps It will illuminate when you switch the parking lamps on. Service Engine Soon If the service engine soon indicator light stays illuminated afterthe engine is started, it indicates that the On Board Diagnosticssystem (OBD) has detected a malfunction of the vehicle emissions control syste...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the ...

Menu structure - information display (All vehicles) You can access the menu using the information display control. Note: Some options may appear slightly different or not at all if the items are optional. † Trip 1 / 2 ToE / Distance to E Trip Odometer Trip Timer AVG / AverageFuel Ford EcoMode Gear S...

Trip Timer Registers the time of individual journeys. Distance to E / ToE Indicates the approximate distance the vehicle will travel on thefuel remaining in the tank. Changes in driving pattern maycause the value to vary. Average Fuel Indicates the average fuel consumption since the function waslast...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

F. SOUND: • Press this button to access settings for Treble, Middle, Bass, Fade andBalance. • Use the up and down arrow buttons to select the various settings.When you make your selection, press the left and right arrow buttonsto change the settings. Press OK to set or press MENU to exit. • Sound se...

M. SEEK: • Press and release this button to go to the previous track or presetradio station. • Press and hold this button to reverse to the previous strong radiostation, memory preset or through the current disc track. N. Function Button 2: Select different functions of the audio system depending on...

AM/FM/CD SONY® AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We r...

D. SOUND: Press this button to access settings for Treble, Middle, Bass, Balance and Fade.E. Eject: Press this button to eject a CD. F. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through theradio frequency band. • In SIRIUS mode, press these buttons to find the next ...

SIRIUS Channel Guide Select to view available satellite radiochannels. Press OK to open a list of the following options for this channel: TuneChannel, Skip Channel or Lock Channel. Onceyou skip or lock a channel, you can only accessit by pressing Direct and entering the channelnumber. Locking or unl...

CD Settings Scan All Select to scan all disc selections. Scan Folder Select to scan all music in the current MP3folder. CD Compression Select to bring soft and loud passages togetherfor a more consistent listening level. Clock Settings Set Time Select to set the time. Set Date Select to set the cale...

SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS® broadcasts a variety of music, news, sports, weather, traffic andentertainment satellite radio channels. For more information and acomplete list of SIRIUS satellite radio channels, visit www.siriusxm.comin the United States, ...

SIRIUS Satellite Radio Service Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such pr...

MANUAL CLIMATE CONTROL A. Fan speed control: Controls the volume of air circulated in your vehicle. Adjust to select the desired fan speed or switch off. If youswitch the fan off, the windshield may fog up. B. Recirculated air: Press to switch between outside air and recirculated air. When you selec...

E. Air distribution control: Adjust to select the desired air distribution. Select to distribute air through the instrument panel air vents. Select to distribute air through the instrument panel andfootwell air vents. Select to distribute air through the footwell air vents. Select to distribute air ...

Recommended Settings for Heating Vehicles with manual climate control Vehicles with automatic climate control 1 Adjust the fan speed to thesecond speed setting. Press the slow fan speed button. 2 Adjust the temperature controlto the midway point of the hotsettings. Adjust the temperature controlto t...

Vehicles with manual climate control Vehicles with automatic climate control 3 Adjust the air distributioncontrol to the instrument panelair vents position. Press the instrument panel ventbutton to distribute air to theinstrument panel air vents. Vehicle Stationary for Extended Periods During Extrem...

Maximum Cooling Performance in Instrument Panel or InstrumentPanel and Footwell Positions Both manual and automatic climate control 1 Adjust the temperature control to the lowest setting. 2 Press the A/C and recirculated air buttons. 3 Adjust the fan speed to the highest setting initially and thenad...

CABIN AIR FILTER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter inplace could result in degradation or damage to the system. Your vehicle is equipped with a cabin air filter; it is located in thepasseng...

Automatic Climate Systems Automatic Settings You can set the climate control to operate in AUTO mode through theinformation display setting: Remote Start > Climate Control > Heater –A/C > Auto. The climate control system automatically sets the interiortemperature to 72°F (22°C). In hot weat...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

• Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. • Position the shoulder strap of the safety belt over the center of yourshoulder and position the lap strap tightly across your hips. Make sure that your driving position is comf...

Front Seat Head Restraints Rear Seat Outboard Head Restraints Rear Seat Center Head Restraints The head restraints consist of: A. An energy absorbing head restraintB. Two steel stemsC. Guide sleeve adjust and release buttonD. Guide sleeve unlock and remove button Seats 153 2013 Focus (foc) Owners Gu...

Adjusting the Head Restraint Raise: Pull up the head restraint. Lower: 1. Press and hold button C. 2. Push the head restraint down. Remove: 1. Pull up the head restraint until it reaches the highest adjustmentposition. 2. Press and hold buttons C and D. 3. Pull the head restraint up. Install: Align ...

MANUAL SEATS WARNING: Never adjust the driver’s seat or seat back when the vehicle is moving. WARNING: Rock the seat backward and forward after releasing the lever to make sure that it is fully engaged. Moving the Seat Backward andForward Adjust the Height of the Driver’sSeat Seats 155 2013 Focus (f...

Recline Adjustment WARNING: Reclining the seat back can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a crash. 156 Seats 2013 Focus (foc) Owners Guide gf, 2nd Printing, November 2012USA (fus)

Folding the Rear Seats Note: Before lowering the seat back(s), remove the outboard head restraints. To lower the seat back(s) from inside the vehicle, do the following: 1. Press the unlock buttons (A)down. 2. Push the seat back forward. Note: Your vehicle may have split seat backs that must be folde...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Available console features include: • Cupholders • Utility compartment • Auxiliary AV connections, USB port, SD slot OVERHEAD CONSOLE (I...

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Ignition On Mode To switch the ignition on, press the start button. Allelectrical circuits and accessories are operational, andwarning lamps and indicators illuminate. STARTING A GASOLINE ENGINE When you start your engine, the idle speed increases to warm the engineup. If the engine idle speed does ...

Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Takeprecautions to avoid its dangerous effects. Important Ventilating Information ...

• Make sure that when in operation, the extension cord plug and theheater cord plug connections are free and clear of water. This couldcause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear ofcombustibles. • Make sure the heater, heater cord and extension cord are...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

Ethanol is more chemically active than gasoline. It corrodes some metalsand causes some plastic and rubber components to swell, break down orbecome brittle and crack, especially when mixed with gasoline. Specialmaterials and procedures have been developed for flexible fuel vehiclesand the dispensers...

Octane Recommendations Regular unleaded gasoline with apump (R+M)/2 octane rating of 87is recommended. Some stationsoffer fuels posted as Regular withan octane rating below 87, particularly in high altitude areas. Do not use fuels with a posted octanerating below 87. Do not be concerned if your engi...

Note: Do not use aftermarket funnels; they will not work with the capless fuel system and can damage it. The included funnel has beenspecially designed to work safely with your vehicle. When filling the vehicle’s fuel tank from a portable fuel container, use thefunnel included with the vehicle. 1. L...

Using the Easy Fuel™ Capless Fuel System WARNING: The fuel system may be under pressure. Insert the fuel nozzle slowly. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may sprayout, which could cause serious personal injury. When fueling yo...

3. After at least three to five tank fill-ups, fill the fuel tank and recordthe current odometer reading. 4. Subtract your initial odometer reading from the current odometer reading. 5. Calculate fuel economy as follows: Standard: Divide miles traveled by gallons used. Metric: Multiply liters used b...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not apply the brake pedal and accelerator pedal simultaneously. Applying both p...

If you cannot move the gearshift lever out of P (Park) with ignition inthe on position and the brake pedal pressed, it is possible that a fuse hasblown or the vehicle’s brake lamps are not operating properly. Refer to Fuses and relays in the Roadside Emergencies chapter. If the fuse is not blown and...

Using Hill Start Assist Note: If the engine is revved excessively, hill start assist will be deactivated. 1. Press the brake pedal to bring the vehicle to a complete standstill.Keep the brake pedal pressed. 2. If the sensors detect that the vehicle is on a slope, the hill start assistfeature will be...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac® system. In ...

A Vehicle without AdvanceTrac® skidding off its intended route. B Vehicle with AdvanceTrac® maintaining control on a slipperysurface. USING ADVANCETRAC® The system automatically activates when you start your engine.The AdvanceTrac® system cannot be completely turned off, but theelectronic stability ...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

Using the Front and Rear Sensing System Rear Sensing System The rear sensors are only active when the transmission is in R (Reverse).As the vehicle moves closer to the obstacle, the rate of the audiblewarning increases. When the obstacle is fewer than 12 inches(30 centimeters) away, the warning soun...

Front Sensing System The front sensors are active when the gearshift is in any position other thanP (Park) or N (Neutral) and the vehicle speed is below 7 mph (12 km/h). A. Coverage area of up to 27 inches(70 centimeters) from the front ofthe vehicle and about 6–14 inches(15–35 centimeters) to the s...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

The system does not position the vehicle where I want in the space The vehicle is rolling in the opposite direction of the transmission(i.e. rolling forward when R [Reverse] is selected) The transmission is in R (Reverse); the vehicle must be movingforward to detect a parking space An irregular curb...

Using the Rear View Camera System The rear view camera system displays what is behind your vehicle whenyou place the transmission in R (Reverse). The system uses three typesof guides to help you see what is behind your vehicle:1. Active guidelines: Show the intended path of the vehicle when reversin...

Guidelines and the Centerline Note: Active guidelines and fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Active or Fixed guidelines are on. A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Ye...

Visual Park Aid Alert Note: Visual park alert is only available when the transmission is in R (Reverse). Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The visual park aid alert allows the driver to view the area...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL (IF EQUIPPED) WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily w...

ECO MODE This system assists the driver in driving more efficiently by constantlymonitoring characteristics of gear changing, anticipation of trafficconditions and speeds while driving. The value of these characteristics is represented by petals shown in thedisplay, with five petals being the most e...

If your vehicle loses electrical power while you are driving (or if theignition is turned off), you can steer the vehicle manually, but it takesmore effort. Extreme continuous steering may increase the effort ittakes for you to steer. This occurs to prevent internal overheating andpermanent damage t...

LUGGAGE COVERS (IF EQUIPPED) WARNING: Make sure that the posts are properly latched in the mounting features. The cover may cause injury in a sudden stop or crash if it is not securely installed. WARNING: Do not place any objects on the cargo area shade. They may obstruct your vision or strike occup...

Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarketequipment. Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Never tow a trailer with this vehicle. Your vehicle is not equipped to tow. No towing packages are available through an authorized dealer. WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assis...

The front wheels (drive wheels) must be on a tow dolly when towingyour vehicle from the rear using wheel lift equipment. This preventsdamage to the transmission. We recommend placing the rear wheels on a tow dolly when towing yourvehicle from the front using wheel lift equipment. This prevents damag...

Vehicles with an Automatic Transmission but No Push Button StartSystem Note: There must be battery power to properly move the transmission’s internal components to position N in Step 3. In addition, moving the gearshift to position N without first turning the ignition to the on (II) position limits ...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair s...

WARNING (Continued) • Check attachment of floor mats on a regular basis. Always properlyreinstall and secure floor mats that have been removed for cleaningor replacement. • Always make sure that objects cannot fall into the driver footwellwhile the vehicle is moving. Objects that are loose can becom...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Companyoffers a complimentary roadside assistance program. This program isseparate from the New Vehicle Limited Warranty. The service is available: • 24 hours ...

If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 kilometers). To obtain reimbursementinformation, U.S. Ford vehicle customers call 1-800-241-3673. Customerswill be asked to submit the...

2. Check all battery terminals. Remove the positive terminal cover (ifequipped) and any excessive corrosion before you attach the batterycables. Ensure that vent caps are tight and level. 3. Turn the heater fan on in both vehicles to protect from any electricalsurges. Turn all other accessories off....

Jump Starting 1. Start the engine of the booster vehicle and run the engine at amoderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables. Removing the...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 0C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM(CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located on the right side below the glove box. Fuse or relay number Fuse amp rating Protected components 56 20A Fuel pump supply, Mass air flowsensor 57 — Not used 58 — Not used 59 5A Passive anti-theft transceiver 60 10A Interior light, Driver door...

Fuse or relay number Fuse amp rating Protected components 85 7.5A Passenger air bag deactivationindicator, Front seat heaterswitch, Heating module (manualair conditioning), Air qualitysensor, Radio, In-car temperatureand humidity sensor 86 10A Air bag module, Occupantclassification system, Passenger...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealerswho are there to help you with their professional servicing expertise.We believe that their specially trained technicians are best qualifie...

Working with the Engine On WARNING: To reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. For vehicles equipped with an automatic transmission, set the parkingbrake and shift to p...

UNDER HOOD OVERVIEW 2.0L Engine (Shown without engine cover, if equipped) A. Engine coolant reservoir B. Brake/clutch fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir A B C D E F G H 250 M...

ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into theoil pan. 3....

Resetting the Oil Life Monitoring System Note: Reset the oil life monitoring only after an oil change. 1. Turn the ignition key to the on position. Do not start the engine.For vehicles with push-button start, press and hold the start button for twoseconds without pressing the brake pedal. Do not att...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Powertrain Limiting and Protection Note: Driving the vehicle without repairing the engine problem increases the chance of engine damage. Take your vehicle to an authorized dealeras soon as possible. The engine control module (ECU) is equipped with a feature calledpowertrain limiting and protection (...

3. Fluid level should be at the bottom of the opening. 4. Add enough fluid through the filler opening so that the fluid level is atthe bottom of the opening. 5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. Refer to the Technical Specifications section in...

CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near thebattery, always shield your face and protect your eyes. Always provideproper v...

It is recommended that the negative battery cable terminal bedisconnected from the battery if you plan to store your vehicle for anextended period of time. To ensure proper operation of the battery management system (BMS),any electrical devices that are added to the vehicle should not havetheir grou...

CHANGING THE WIPER BLADES The wiper arms can be manually moved when the ignition is off. Thisallows for ease of blade replacement and cleaning under the blades. 1. Turn the ignition off beforeremoving the wiper blade. 2. Pull the wiper blade and armaway from the glass. 3. Squeeze the locking tabs to...

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is heard. If you find this procedure too difficult, please see your authorized dealer. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and/or...

Changing the Air Filter Element 1. Loosen the screws that securethe air filter housing cover (A). 2. Carefully lift the air filter housingcover. 3. Remove the air filter element (B)from the air filter housing (C). 4. Wipe the air filter housing andcover clean to remove any dirt ordebris and to ensur...

For Vehicles with HID Headlamps: There is a distinct cut-off (changefrom light to dark) in the leftportion of the beam pattern. Thetop edge of this cut-off should bepositioned 2 inches (5 centimeters)below the horizontal reference line. 4. Locate the vertical adjuster oneach headlamp. Using a Philli...

Headlamp assembly: A. High beam headlamp bulb B. Side marker bulb C. Low beam headlamp bulb D. Front parking lamp and turnsignal bulb High beam headlamp bulb: 1. Remove the headlamp assembly. 2. Remove the service cap. 3. Disconnect the electricalconnector. 4. Remove the bulb from theheadlamp assemb...

Replacing Rear Lamps - 4 Door 1. Make sure the headlamp controlis in the off position and open thetrunk. 2. Remove the trim panel frominside the luggage compartment. 3. Remove the two nuts from thelamp assembly 4. Gently pull the lamp assembly away from the vehicle 5. Remove the bulb by turning the ...

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

2. Wipe the surface with a damp, clean, white, cotton cloth. For morethorough cleaning, use a mild soap and water solution. If the spot cannotbe completely cleaned by this method, the area may be cleaned using acommercially available cleaning product designed for automotiveinteriors. 3. If necessary...

• Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Industrial-strength (heavy-duty) cleaners, orcleaning chemicals, in combination with brush agitation to removebrake dust and dirt, could wear away the clearcoat finish over time. • Do not use hydrofluoric acid-ba...

Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up onwindow surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collecte...

TIRE CARE IMPORTANT INFORMATION FOR235/40R18 LOW-PROFILE TIRESAND WHEELS If your vehicle is equipped with 235/40R18 tires, they are low-profiletires. These tires and wheels are designed to give your vehicle a sportappearance. With low-profile tires, you may notice an increase in roadnoise and faster...

Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernment test course. For example, a tire graded 150 would wear1 1 ⁄ 2 times as well on the government course as a tire graded 100. The relative performance...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in af...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you are driving, the wheels maybe out of alignment. Have an authorized dealer check the wheelali...

USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performanceof your vehicle, which could result in an increased risk of loss of vehiclecontrol, vehicl...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge.See Inflating Your Tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it onthe vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, the tire pressure monitoring system sensor andvalve stem on the wheel must be replaced by an authorized Ford dealer. WARNING: See Tire P...

The usage of a full-size dissimilar spare tire and wheel assembly can leadto impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving...

8. The vehicle jacking points areshown here, and are depicted on theyellow warning label on the jack. Note: Jack at the specified locations to avoid damage to the vehicle. 9. Remove the lug nuts with the lug wrench. 10. Replace the flat tire with the spare tire, making sure the valve stemis facing o...

Bolt size Wheel lug nut torque* ft-lb N • m M12 x 1.5 100 135 * Torque specifications are for nut and bolt threads free of dirt andrust. Use only Ford recommended replacement fasteners. Note: Inspect the wheel pilot bore and mounting surface prior toinstallation. Remove any visiblecorrosion or loose...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver’s sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacture...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

Peace of mind • Keyless entry keypad • Wheel locks • Remote start • Bumper mounted parking assist system* • Vehicle security systems • Car cover *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designedand developed by the ac...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • r...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

Protecting Your Investment Maintenance is an investment that pays dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designatedin...

Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concern or that the fluidneeds to be changed. However, discolored fluids that also show signs ofoverheating and/or foreign material contamination should be...

Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick...

Additional Maintenance Items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 15...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Inspect frequently,service as required Replace cabin air filter (if equipped). Replace engine air filter. Every 5000 miles(8000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag. Rotate tires...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Operating in Dusty or Sandy Conditions such as Unpaved or Dusty Roads Every 5000 miles(8000 km) or sixmonths Change engine oil and filter. * Perform multi-point inspection. * C-MAX Energi only: Reset your Intelligent Oil-Life Monitor® after each engine oil and filter change. See Engine oil check in ...

• Do not leave playing devices in your vehicle during extreme conditionsas it could cause them damage. See your device’s manual for furtherinformation. • Do not attempt to service or repair the system. See your authorizeddealer. For your safety, some SYNC functions are speed-dependent. Their use isl...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

When you select: You can: Phonebook 1,2 Allows you to access your downloadedphonebook.1. Press OK to confirm and enter. If yourphonebook has fewer than 255 listings, theyappear alphabetically in flat file mode. If thereare more, they are organized into alphabeticalcategories.2. Scroll until the desi...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

Pre-defined text message options Too funny Can’t wait to see you I’m stuck in traffic Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you toaccess and adjust features such as your ring tone, text messagenotification, modify your phone book and also set up ...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.,add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, U.S. only): Provides ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report Options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC Services Quick Tips Personalizing You can personalize your Services feature toprovide quicker access to your most used orfavorite information. You can sa...

“USB” “Search song <name>” 1 “Search track <name>” 1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Voic...

Voice Command Guide “Refine” This allows you to make your previouscommand more specific. For example, if youasked to search and play all music by acertain artist, you could then say “refinealbum” and choose a specific album from thelist to view. If you then select Play, the systemonly plays music fr...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Media Settings Choose to shuffle or repeat your music andselect your Autoplay settings. Once theseselections are turned on, they remain on untilturned off. Press SEEK to play the previousor next track. Note: Some digital media players require both USB and line in ports to s...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compilea playlist for you.Press OK to select. The system creates a newlist of similar songs and begins playing. Themetadata tags must be p...

4. Press OK and then scroll to select from: When you select: You can: Add BluetoothDevice * Allows you to pair additional devices to thesystem.1. Press OK to select and press OK againwhen Find SYNC appears in the display.2. Follow the directions in your phone’s userguide to put your phone into disco...

Advanced Menu Options This menu allows you to access settings such as prompts, language,performing a master reset as well as returning to factory defaults.1. Press AUX and then MENU to access the Media Menu.2. Scroll until System Settings appears and select OK.3. Scroll until Advanced appears.4. Pre...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications(if available) and then load the desiredapplications throu...

Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Cause(s) Possible Solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnumber) list...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agains...

SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’soption package and software, your screens may vary in appearance from the descriptions in this section. Your features may alsobe limi...

Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30am-8:00pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–565–3673 Times are subject to change due to holidays. Safety Information WARNING: Driving while...

How to Use Voice Commands with Your System Press the voice icon. After the tone, speak your commandclearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say? To access the available vo...

Accessing a List of Available Commands • If you use the touchscreen, press the Settings icon > Help > Voice Command List. • If you use the steering wheel control, press the voice icon. After thetone, speak your command clearly. Voice command list “Audio list of commands” “Bluetooth audio list ...

Some of the voice commands that are available while viewing this screenare: “INTERSECTION” “Enter first street name” “Change first street name” “Enter second street name” “Change second street name” “Enter city” “Change city” “Enter state” “Change state” The dual mode feature is also available when ...

Browsing Device Content When listening to any type of audio, you can browse through otherdevices without having to change sources. For example, if you arecurrently listening to the radio, you can browse all the artists that arestored on your USB device. Press the voice icon on the steering wheel. Wh...

Your voice system allows you to change audio sources with a simplevoice command. For example, if you are listening to music on a USBdevice, then want to switch to a satellite radio channel, simply press thevoice button on the steering wheel controls and say the name of theSIRIUS station (such as, “t...

“RADIO” “<87.9–107.9>” “FM autoset preset <#>” “<87.9–107.9> HD” 1 “FM preset <#>” “<530–1710>” “FM1” “AM” “FM 1 preset <#>” “AM <530–1710>” “FM2” “AM autoset” “FM 2 preset <#>” “AM autoset preset <#>” “HD <#>” 1 “AM preset <#>” “Pres...

• Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns.There is a brief mute while the radio saves the station. Sound returnswhen finished. When switching to an HD2 or HD3 memory preset, thesound mutes before the digital a...

SIRIUS® Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas.There is a brief mute while the radio saves the channel. Sound returnswhen finished. ALERT Save the current...

Potential Satellite Radio Reception Issues Station overload When you pass a ground-basedbroadcast-repeating tower, a stronger signalmay overtake a weaker one and the audiosystem may mute. Satellite radio signalinterference Your display may show ACQUIRING . . . toindicate the interference and the aud...

SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Updating. Update of channelprogramming inprogress. No action required.The process may takeup to three minutes. Call SIRIUS1–888–539–7474. Your satellite service isno longer available. Contact SIRIUS at1-888-539-7474 toresolve subscr...

Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on a...

SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. Note: The navigation system also uses this card slot. See Navigation system late...

Playing Music from Your Device Insert your device and select the SD Card or USB tab once the system recognizes it. You can then select from the following options: Repeat replays the currently playing song or album. Shuffle plays music on the selected album or folder in random order. Similar Music al...

SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press thevoice button on the steering wheel control. When prompted, sayany of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, say...

Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers fromyour connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, thenselect the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio ...

Troubleshooting • Do not connect the audio input jack to a line level output. The jackonly works correctly with devices that have a headphone output witha volume control. • Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio as this c...

Reject the call by pressing Reject on the touchscreen or by pressing and holding this phone button on your steering wheelcontrols. Ignore the call by doing nothing. SYNC logs it as a missed call. Phone Menu Options Press the top left corner on your touchscreen to select from thefollowing options: Ph...

Messaging Send text messages using your touchscreen. See Text messaging later in this section. Settings Touch this button to access various phone settings, such turningBluetooth on and off, managing your phonebook and more. See Phone settings later in this section. Text Messaging Note: Downloading a...

Phone Settings Press Phone > Settings. Bluetooth Devices Touch this tab to connect, disconnect, add or delete a device, as well assave it as a favorite. Bluetooth Touch this tab to turn Bluetooth off or on. Do Not Disturb Touch this tab if you want all calls to go directly to your voice mail andn...

INFORMATION If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A. SYNC® Services B...

Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Services. 1. Select Connect to Servic...

If you miss a turn, SYNC automatically asks if you want the routeupdated. Just say, “Yes” when prompted and the system delivers a newroute to your vehicle. If your vehicle is equipped with Navigation, SYNC Services downloadsyour requested destination to the navigation system. The navigationsystem th...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel control. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summa...

Note: Neither SIRIUS nor Ford is responsible for any errors or inaccuracies in the SIRIUS Travel Link services or its use in vehicles. When you subscribe to SIRIUS Travel Link, it can help you locate thebest gas prices, find movie listings, get current traffic alerts, view thecurrent weather map, ge...

SIRIUS Travel Link Voice Commands Note: In order to use SIRIUS Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button on the steering wheel controls and, whenprompted, say any of the following: Travel Link voice comm...

Setting 911 Assist On If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Apps > 911 Assist, then select On. You can also access 911 Ass...

Register for Vehicle Health Report and set your report preferences atwww.SYNCMyRide.com. After registering, you can request a VehicleHealth Report (inside your vehicle). Return to your account atwww.SYNCMyRide.com to view your report. You can also choose forSYNC to remind you automatically to run re...

SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust thedisplay, sound and vehicle settings as well as access settings forspecific modes or the help feature. Clock Note: You cannot manually set the date. Your vehicle’s GPS do...

From this screen, you can also make other adjustments, such as 12– or24–hour mode, activate GPS time synchronization and have the systemautomatically update for daylight savings time and new time zones. You can also turn the outside air temperature display on and off. Itappears at the top center of ...

Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass THX Deep Note Demo * Midrange DSP * Treble Occupancy Mode * Set Balance and Fade Speed Compensated Volume * If equipped. Vehicle Press the Settings icon > Vehicle, then select from the following: • Activ...

Enable Valet Mode Note: If the system locks, and you need to reset the PIN, enter 3681 and the system unlocks. Valet mode allows you to lock the system. No information is accessibleuntil the system is unlocked with the correct PIN.1. Press the Settings icon > Vehicle > Enable Valet Mode. 2. Wh...

Voice Control Press the Settings icon > Settings > Voice Control, then select from the following: Voice Control Interaction Mode Standard interaction mode provides moredetailed interaction and guidance. Advancedmode has less audible interaction and moretone prompts. ConfirmationPrompts Have th...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the sys...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

To access Help using the voice commands, press the voice button, then,after the tone, say “Help”. The system provides allowable voicecommands for the current mode. CLIMATE Press the lower right corner on the touchscreen to access your climatecontrol features. Depending on your vehicle line and optio...

Additional climate control voice commands “Minimum fan” “Windshield panel floor on” “Off” “Windshield panel on” “On” “Help” * If you have said “Temperature”, you can say any of the commands in the following “Temperature” chart. “TEMPERATURE” “<15.5–29.5> degrees” “<60–85> degrees” “High”...

Setting a Destination Press the green corner of your touchscreen, then Dest when it appears. Choose any of the following: Destination Selections My Home Street Address Favorites Intersection Previous Destinations City Center Point of Interest Map Emergency Edit Route Cancel Route Previous Starting P...

cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 154 cities (132 in the U.S., 13 in Canada and 9 in Mexico). cityseekr, when available, is a service thatprovides more information about certainpoints of interest such as restaurants,hotels and attracti...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr also tellsyou if the hotel has certain services and facilities using icons. Hotel Services and Facilities Restaurant 24 Hr Room Service Business Center Fi...

Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press the Settings icon > Settings > Navigation. When you select: You can: Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom...

When you select: You can: Traffic Preferences Choose how you want the system to handletraffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop andimpact the current route (no notification isprovided). Manual: Have the system always provide a t...

Change the appearance of the mapdisplay by repeatedly pressing thearrow button in the upper leftcorner of the screen. It togglesbetween three different map modes:Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen. This view is av...

Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scrollmode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursoris in a window on the top center p...

“DESTINATION” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” ...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”)from an affiliate of Microsoft Corporation (“MS”). Those installed softwareproducts of MS origin, as well...

DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS: • Speech Recognition: If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is aninherently statistical process and that recognition errors are inherentin the process. Neither FORD MOTOR COMPANY nor its su...

• Security Updates/Digital Rights Management: Content owners use the WMDRM technology included in your DEVICE to protect theirintellectual property, included copyrighted content. Portions of theSOFTWARE on your DEVICE use WMDRM software to accessWMDRM-protected content. If the WMDRM software fails t...

INTELLECTUAL PROPERTY RIGHTS: All title and intellectual property rights in and to the SOFTWARE (including but not limited toany images, photographs, animations, video, audio, music, text and“applets,” incorporated into the SOFTWARE), the accompanying printedmaterials, and any copies of the SOFTWARE...

SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISINGFROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OFTHE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANYREMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALLMS, MICROSOFT CORPORATION AND/OR THEIR AFFILIATES BELIABLE FOR ANY AMOUNT IN EXCESS OF ...

General operation Voice Command Control Functions within the Windows Automotive-based system may beaccomplished using only voice commands. Using voice commands whiledriving allows you to operate the system without removing your handsfrom the wheel. Prolonged Views of Screen Do not access any functio...

8. Miscellaneous 8.1 This Agreement constitutes the entire agreement between TeleNavand you with respect to the subject matter hereof.8.2 Except for the limited licenses expressly granted in this Agreement,TeleNav retains all right, title and interest in and to the TeleNavSoftware, including without...

9. Other Vendors Terms and Conditions The TeleNav Software utilizes map and other data licensed toTeleNav by third party vendors for the benefit of you and other endusers. This Agreement includes end-user terms applicable to thesecompanies (included at the end of this Agreement), and thus youruse of...

Disclaimer of Warranty: NT AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES,EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ORNON-INFRINGEMENT. Some States, Territories and Countries do notallow certain warranty exclusi...

Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 娀 2000–2007 Gracenote. Gracenote Software, copyright 娀 2000–2007 Gracenote. This product and service may practice one or more of thefollowing U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132,#6,230,192, #6,23...

911 Assist™ ......................353, 430 A ABS (see Brakes) .....................189 Accessing and using yourUSB port ....................................408 Accessing call history/phonebook during active call .............343 Accessing your calendar ..........429 Accessing your media menufeatures...

V Vehicle health report ........356, 432 Vehicle Identification Number(VIN) ..........................................310 Vehicle loading ..........................210 Ventilating your vehicle ...........166 Voice commands in mediamode ..........................................363 Voice commands in ...