Ford 2013 Explorer v.4- User Manual

Symbol Description Symbol Description Symbol Description Heated rearwindow Interiorluggagecompartmentrelease Jack Lightingcontrol Low tirepressurewarning Maintaincorrect fluidlevel Panic alarm Parking aidsystem Parking brakesystem Powersteering fluid Powerwindows frontand rear Power windowlockout Se...

Note: Including to the extent that any law pertaining to EventData Recorders applies to SYNC® or its features, please note thefollowing: Once 911 Assist (if equipped) is enabled (set ON), 911Assist may, through any paired and connected cell phone, discloseto emergency services that the vehicle has b...

FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help youacquire your vehicle. If you have financed or leased your vehicle throughFord Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as wellas help manage your...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, see the warrantyinformation that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehic...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four or younger). Use a child safety seat(sometimes called aninfant carrier, convertibleseat, or toddler seat). Sma...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduc...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collision. Note: Some booster seat safety belt guides may not acco...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

INSTALLING CHILD SEATS Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move theseat all the way back. WARNING: Children 12 and u...

• Inflatable safety belt: grasp theshoulder belt and lap belt togetherbehind the belt tongue. 3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert t...

• Inflatable safety belt buckle 5. To put the retractor in the automatic locking mode, do the following; • Standard safety belt: grasp theshoulder portion of the belt andpull downward until all of thebelt is pulled out. • Inflatable safety belt: grasp the lapportion of the inflatable safety beltand ...

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To checkthis, grab the seat at the belt pathand attempt to move it side to sideand forward and back. There shouldbe no more than 1 inch (2.5 cm) ofmovement for proper insta...

Use of inboard lower anchors from the outboard seating positions(center seating use) Note: The standardized spacing for LATCH lower anchors is 11 inches (28 centimeters) center to center. Do not use LATCH lower anchors forthe center seating position unless the child seat manufacturer’sinstructions p...

The tether strap anchors in your vehicle are in the following positions(shown from top view): • Second-row bucket seats andthird-row passenger side • Second-row bench seats andthird-row passenger side Perform the following steps to install a child safety seat with tether anchors: Note: If you instal...

• Third-row seat Note: The cargo tie-downs at the rear edge of the floor are not tether anchors. 3. Clip the tether hook to the anchor as shown. The tether hook may betwisted 1/2 turn to improve installation. If the tether strap is clipped incorrectly, the child safety seat may not beretained proper...

CHILD SAFETY LOCKS When these locks are set, the rear doors cannot be opened from theinside. The childproof locks are located onthe rear edge of each rear door andmust be set separately for eachdoor. • Insert the key and turn to thelock position (key horizontal) toengage the childproof locks. • Inse...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while t...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt or lap belt is automatically pre-locked.The belt will still retract to remove any slack in the shoulder or lap belt.The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be...

Safety Belt Extension Assembly WARNING: Do not use extensions to change the fit of the shoulder belt across the torso. WARNING: Do not use extensions with an inflatable safety belt. Safety belt extensions are vehicle-specific. See an authorized dealer tomake sure you obtain the proper safety belt ex...

Deactivating and Activating the Belt-Minder® Feature WARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the systemactivated for yourself and others who may use the vehicle. To...

REAR INFLATABLE SAFETY BELT (IF EQUIPPED) WARNING: Do not attempt to service, repair, or modify the rear inflatable safety belt. Note: The rear inflatable safety belts are compatible with most infant and child safety car seats and belt positioning booster seats when properlyinstalled. This is becaus...

• During a crash of sufficient force, the inflatablebelt will inflate from inside the webbing. • The fully inflated belt’s increased diameter moreeffectively holds the occupant in the appropriateseating position, and spreads crash forces over morearea of the body than regular safety belts. Thishelps...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags do not inflate slowly;there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

After all occupants have adjusted their seats and put on safety belts,it is very important that they continue to sit properly. Properly seatedoccupants sit upright, lean against the seat back, and center themselveson the seat cushion, with their feet comfortably extended on the floor.Sitting imprope...

After all occupants have adjusted their seats and put on safety belts,it is very important that they continue to sit properly. Properly seatedoccupants sit upright, lean against the seat back, and center themselveson the seat cushion, with their feet comfortably extended on the floor.Sitting imprope...

SAFETY CANOPY® CURTAIN AIRBAGS WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions mayincrease the risk of personal injury in the event of a crash. WARNING: Do not l...

The system consists of: • safety canopy curtain airbagsfitted above the trim panels overthe front and rear side windowsidentified by a label or wordingon the headliner or roof-pillartrim. • a flexible headliner which opens above the side doors to allow aircurtain deployment. • crash sensors and moni...

AIRBAG DISPOSAL Contact your authorized dealer as soon as possible. Airbags MUST BEdisposed of by qualified personnel. 60 Supplementary Restraints System 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012USA (fus)

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • unlock the doors without actively using a key or remote control(intelligent access only) • remotely open the power liftgate (if equipped) • remotely start or stop the engine (if equipped) • arm and...

The radio frequency used by your remote control can also be used byother short-distance radio transmissions, for example amateur radios,medical equipment, wireless headphones, remote controls and alarmsystems. If the frequencies are jammed, you will not be able to use yourremote control. You can loc...

Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should ...

Deactivating Memory from the Transmitter 1. Press and hold the desired button for five seconds. A tone will soundwhen the memory store is done. Continue to hold until a second tone isheard. 2. Within three seconds press the unlock button on the remote control. 3. Repeat this procedure for each addit...

Extending the Vehicle Run Time Repeat Steps 1 and 2 with your vehicle still running to extend the runtime for another remote start duration. If the duration is set to last10 minutes, the duration will extend by another 10 minutes beginningafter what is left of the first activation time. For example,...

PRINCIPLES OF OPERATION MyKey® allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an administrator key or admin...

• Vehicle speed minder of 45, 55 or 65 mph (75, 90, or 105 km/h).Visual warnings are displayed followed by an audible tone when thepreselected vehicle speed is exceeded. • Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume.Also,...

MYKEY TROUBLESHOOTING Condition Potential Causes I cannot program akey. • The key in the ignition does not have admin privileges. • The key in the ignition is the only admin key (there always has to be at least one adminkey). • The intelligent access key is not in the backup slot (vehicles with push...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime the vehicle...

Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the hornsounds twice and the lamps will not flash. Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the liftgate area before using power liftgate...

Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of yourvehicle if your key is still in the ignition. When you open one of the front doors and lock your vehicle with thepower door lock control, all the doors will lock then unlock if your ke...

Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle reaches a speed greater than 12 mph (20 km/h). The autolock feature repeats when: • you open...

Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. WARNING: Keep keys out of reach of children. Do not allow children to play near an open or moving power liftgate. Note: Cycling the ignition while the liftgate is...

To open or close from the instrument panel: Press the instrument panel button. To open or close with the remote control: Press the remote control button twice within three seconds. To open with the outside liftgatecontrol button: 1. Unlock the liftgate with the remotecontrol or power door unlock con...

You may also program a personal entry code through the MyFord Touchor MyLincoln Touch system. Refer to the MyFord Touch or MyLincoln Touch chapter. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you...

Arming the Alarm The system is ready to arm whenever the ignition is off. Lock the vehicleto arm the alarm. The turn signal lamps will flash once after locking the vehicle to indicatethe alarm is in the pre-armed mode. It will become fully armed in20 seconds. Disarming the Alarm To disarm the alarm,...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 See the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP 92 Steering Wheel 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012USA (fus)

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not re...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams Push the lever forward to switch thehigh beams on. Push the lever forward again or pullthe lever toward you to switch thehigh beams off. Headlamp Flasher • Pull toward you sligh...

AUTOLAMPS WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the ...

HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to threeminutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp p...

DAYTIME RUNNING LAMPS (IF EQUIPPED) WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps...

Note: Modification of the vehicle ride height (e.g. using much larger tires) may degrade feature performance. A camera sensor is centrally mounted behind the windshield of thevehicle, and monitors the conditions to decide when to switch the highbeams off and on. Once the system is active the high be...

Manually overriding the system When the automatic control hasactivated high beams, pushing orpulling the stalk will provide atemporary override to low beam. To permanently deactivate the system use the information display menuor turn the lighting control switch from autolamps to headlamps. FRONT FOG...

INTERIOR LAMPS Dome Lamp Control Without fog lamps With fog lamps Use to manually turn the dome lamp on. • Press the control. This will turn on the interior courtesy lights.The lights will remain on until the control is pressed again. Front Row Map Lamps (If Equipped) To turn on the map lamps, press...

Second row dome/map lamps (if equipped) The dome lamp lights when: • any door is opened. • the instrument panel dimmer button is pressed until thecourtesy lamps come on. • any of the remote entry controls are pressed and theignition is off. The reading function can be turned on and off at the lampwi...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in ...

Window Lock Press the control to lock or unlockthe rear window controls. Bounce-Back The window will stop automatically while closing and reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back Feature WARNING: When you override the bounce-back feature the window will not...

EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicatorlight on the button will illuminate. 2. Use...

Press the button to fold the mirrorsin or out. A mirror may also be manually folded by pulling it toward the doorwindow glass. This may cause the mirror to appear loose and it will needto be re-synchronized. Press the button to fold the mirrors in. A clickwill be heard indicating re-synchronization....

The image of the approachingvehicle is small and near the inboardedge of the main mirror when it is ata distance. The image becomeslarger and begins to move outboardacross the main mirror as the vehicleapproaches (A). The image willtransition from the main mirror andbegin to appear in the blind spot...

Auto-Dimming Mirror (If Equipped) Note: Do not block the sensors on the front and back of the mirror. Mirror performance may be affected. A rear center passenger or raisedrear center head restraint may also block light from reaching the sensor. The mirror will dim automatically to reduce glare when ...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch® for more information. WARNING LAMPS AND INDICATORS There indicators can alert you to a vehicle conditio...

• Engaged (green light): Illuminates when the adaptive cruise controlsystem is engaged. Turns off when the speed control system isdisengaged. Airbag readiness If this light fails to illuminate when the ignition is turned on,continues to flash or remains on, contact your authorized dealeras soon as p...

Charging system (RTT) Illuminates when the battery is not charging properly. If it stayson while the engine is running, there may be a malfunction withthe charging system. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a relatedcomponent. D...

Hill descent (if equipped) (RTT) Illuminates when hill descent is turned on. High beams Illuminates when the high-beam headlamps are on. Lane keeping system (if equipped) (RTT) Illuminates when the lane keeping system is activated. Low fuel (RTT) Illuminates when the fuel level in the fuel tank is a...

Powertrain malfunction/reduced power Illuminates when a powertrain or an 4WD fault has beendetected. Contact your authorized dealer as soon as possible. Safety belt Reminds you to fasten your safety belt. A Belt-Minder® chimewill also sound to remind you to fasten your safety belt. Service engine so...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take theirfocus off the road. Your primary responsibility is the safe operation of the...

†Trip 1 / 2 Fuel Used Total Odometer (located in lower right of display). Note: this will also display in other menus. †See Trip computer later in this section for more information. Information Intelligent 4WD — Displays power distribution between the front and rearwheels. More power to either front...

Settings Convenience Autolamp Delay Off or number of seconds Compass Display DTE Calculation Normal or Towing Easy Entry/Exit Locks Autolock Autounlock Remote Unlock All Doors orDriver First Oil life Reset Set XXX% Power Liftgate Switch Enabled or Disabled Remote Start Climate Control Heater – A/C /...

Information Messages See Information Messages later in this chapter for more information. Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow butt...

Fuel Economy Use the left/right arrow buttons to choose the desired fueleconomy display. Fuel Economy Inst Fuel Economy XX. Min Fuel History Instantaneous fuel usage X †Fuel usage over a 5, 10, or30 minute time span X Total odometer (lower left corner) Press and hold OK to reset the currently displa...

Information In this mode, you can view different vehicle system informationand perform a system check. Warnings XX Warnings Displays the number of warnings that needimmediate attention in amber. You can only view thewarnings form the System Check menu. View themimmediately by pressing OK or right ar...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the OK button toacknowledge and remove somemessages from the...

Alarm/Security Messages Action / Description To Stop Alarm, StartVehicle Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to start or onbefore...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

BLIS® Messages Action / Description Blind Spot NotAvailable SensorBlocked Displayed when the blind spot informationsystem/cross traffic alert system sensors areblocked. Driver can typically clean the sensorto resolve. Blind Spot SystemFault Displayed when a fault with the blind spotinformation syste...

Collision Warning System Messages Action / Description Collision Warn NotAvailable Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision Warn NotAvailable SensorBlocked Displayed when th...

Maintenance Messages Action / Description Washer Fluid LevelLow Indicates the washer fluid reservoir is less thanone quarter full. Check the washer fluid level. Steering MalfunctionService Now Displays when the steering system needsservice. See your authorized dealer. Service Power Steering The powe...

Terrain Management / Off Road / Hill Descent Messages Action / Description Hill Descent ControlReady Displayed when hill descent control mode isactivated. Terrain ManagementNormal Mode Displays driver selected terrain managementnormal mode. Normal Mode Active Displays terrain management normal mode ...

Reminder Messages Action / Description Steering Lock TurnWheel to Unlock Displays when you need to turn the steeringwheel in order to disengage the steering lock. Shift to Park Displays as a reminder to shift into park. Tire Messages Action / Description Low Tire Pressure Displays when one or more t...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agai...

C. Memory presets: • In radio mode, store your favorite radio stations. To store a radiostation, tune to the station, then press and hold a preset button untilsound returns. • In CD mode, press one of these buttons to select a track. D. Function buttons: Select different functions of the audio syste...

N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter. O. SIRIUS: Press this button to listen to SIRIUS satellite radio. Menu Structure Note: Depending on your system, some opti...

AM/FM/CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We...

B. Seek, Reverse and Fast Forward: • In radio mode, select a frequency band and press one of thesebuttons. The system stops at the first station it finds in that direction. • In SIRIUS mode, press these buttons to select the previous or nextchannel. If a specific category is selected (such as Jazz, ...

USB PORT WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend against th...

SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS® broadcasts a variety of music, news, sports, weather, traffic andentertainment satellite radio channels. For more information and acomplete list of SIRIUS satellite radio channels, visit www.siriusxm.comin the United States, ...

SIRIUS Satellite Radio Service Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such pr...

D. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently inthe passenger compartment is being recirculated. Using recirculated aircan reduce the time needed to cool the interior and reduce unwantedodors from entering your veh...

F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air. To improve air conditioning when starting yourvehicle, drive with the windows slightly open for two to three minutes.Use A/C with recirculated air to improve cooling performance and efficiency. N...

GENERAL OPERATING TIPS Manual Heating and Air Conditioning System • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and fan speed can also be increased to improveclearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or w...

Dual Zone Automatic Temperature Control • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and fan speed can also be increased to improveclearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with recirculated air engag...

HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The ignition must be switched on to use this feature. Press the button to clear the rear window of thin ice and fog. Press thebutton again within 10 minutes to switch it off. It switches offautomatically after 10 minutes, or when you ...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. Turn theignition on to return the system to its previous settings. You can nowmake adjustments. You will need to turn ...

Last Settings You can set the climate control to operate using the last climate controlsettings through the information display setting: Remote Start > ClimateControl > Heater – A/C > Last Settings. The climate control systemautomatically uses the settings last selected before you turned of...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

• Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. • Position the shoulder strap of the safety belt over the center of yourshoulder and position the lap strap tightly across your hips. Make sure that your driving position is comf...

To adjust the head restraint, do the following: Front seat head restraints Second-row center seat headrestraint (if equipped) The head restraints consist of: A. Energy absorbing head restraint B. Steel stems C. Guide sleeve adjust and release button D. Guide sleeve unlock and remove button • Raise: ...

Second-row outboard seat headrestraints The head restraints consist of: A. Energy absorbing head restraint B. Steel stems C. Guide sleeve unlock and remove buttons D. Fold strap • Fold: Pull the fold strap (D). Pull it back up to reset. • Remove: Fold the head restraint. Press and hold both of the u...

Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seat back to an upright driving orriding position. 2. Tilt the head restraint forward by gently pullingthe top of the head restrain...

POWER SEATS (IF EQUIPPED) WARNING: Never adjust the driver’s seat or seat back when the vehicle is moving. WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. Power Seat Adjustments Power Lumbar 174 Seats 2013 Ex...

MEMORY FUNCTION (IF EQUIPPED) This memory control, located onthe driver’s door, allows automaticpositioning of the driver seat,power mirrors, steering column(if equipped) and power adjustablefoot pedals (if equipped) to threeprogrammable positions. Programming a memory position Note: You can program...

Easy Entry and Exit Feature (If Equipped) This feature automatically moves the driver’s seat rearward 2 inches(5 centimeters) when: • the transmission is in position N or P • the key is removed from the ignition or the push button start system(if equipped) is switched off. The seat will move to the ...

Note: When the heated or cooled front seat is active, you will be able to hear the fan operating inside the seat. This is normal. Heated and Cooled Seat Air Filter Replacement (If Equipped) The climate controlled seat system includes air filters. You must replacethem periodically. See the scheduled ...

REAR SEATS Second Row Seats Recline Adjustment WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: Reclining the seat back can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of...

Moving the seats backward andforward (if equipped) Third Row Seats Third-Row Seat Access (Manual Seats) WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its originalposition, p...

Fold and tumble the second-row seat to access the third row: 1. Fold the outboard head restraint bypulling the head restraint releasestrap. 2. Lift the handle located on the sideof the seat to fold the seat back flat. 3. Lift the handle all the way up until the seatreleases from the floor. Rotate th...

4. To return the seat back to the floor from thetumbled position, rotate the seat down until you hearit latching to the floor. 5. Lift the seat back toward the rearof the vehicle, and rotate the seatback until you hear a click, lockingit in the upright position. Note: The seat back will not raise if...

1. Fold the outboard head restraint bypulling the head restraint release strap. 2. Pull on the strap located on theback of the second row seat. Thiswill fold the seat back forward. Pullthe strap a second time to tumblethe seat forward, allowing easy exitfrom the third row seat. 3. To return the seat...

4. Release the cushion latches by pulling thenumber 2 strap while pulling on the straplocated at the top of the seat back to tumblethe seat all the way into the tub in the floor. Note: Do not use the seat anchors as cargo tie downs. Note: Do not use the third-row seat back as a load floor when the s...

The third-row power seat buttons are located behind the third- row seatson the left-hand quarter trim panel. A. NORMAL: Press to return the seat to the normal seating position. B. STOW: Press to stow the seat into the tub floor. C. FOLD: Press to fold down the seat back. D. RH / BOTH / LH: Press to ...

UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’s universal garage door opener will varyaccording to your option package. Before programing, make sure youidentify which transmitter you have by comparing it to the graphicsbelow. HomeLink® Car2U® Home AutomationSystem Note: The programming...

Rolling Code Programming Note: If you do not follow the time-sensitive instructions, the device will time out and you will have to repeat the complete procedure. Note: It may be helpful to have another person assist you in programming the transmitter. 1. Switch the ignition on. 2. Press and hold the...

8. The LED lamp will begin to flash rapidly until programming iscomplete. If your garage door does not operate, repeat the previoussteps. Otherwise, call the toll-free help line at 1-866-572-2728. The LED lamp above the selected button will illuminate to confirm thatthe system is responding to the b...

Erasing the Function Button Codes Note: You cannot erase individual buttons. 1. Press and hold the outer two functionbuttons simultaneously for approximately20 seconds until the indicator lights abovethe buttons flash rapidly. 2. When the indicator lights flash, releasethe buttons. The codes for all...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Available console features include: A. Cupholders B. Utility storage compartment withpower point C. Power point and 110 volt ACpower point outlet (if equipped) onthe rear of the console D. Auxili...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. 204 Storage Compartments 2013 Explorer (exp) Owners Guide gf, 4th Printing, November 2012USA (fus)

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Ignition Modes Off: Turns the ignition off. • Without applying the brake pedal, press and release the button oncewhen the ignition is in the on mode, or when the engine is runningbut the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not runnin...

Fast Restart The fast restart feature allows you to restart the engine within20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal andpress the button. After 20 seconds have expired, you can no longer startthe engine ...

If the engine does not start after three attempts, wait 10 seconds andfollow this flooded engine procedure. 1. Fully press the brake pedal. 2. Fully press the accelerator pedal and hold it there. 3. Select position P or N. 4. Start the engine. If your vehicle is equipped with a push button start sys...

We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified byUnderwriter’s Laboratory or Canadian Standards Association.This extension cord must be able to be used outdoors, in coldtemperatures, and be clearly marked Suita...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

after refueling for at least 5 miles (8 kilometers) to allow the vehicleto adapt to the change in ethanol concentration. If you exclusively useE85 fuel, it is recommended to fill the fuel tank with regular unleadedgasoline at each scheduled oil change. Your vehicle was not designed to use fuel or fu...

• Normally, adding 1 gallon (3.8 liters) of fuel is enough to restart theengine. If the vehicle is out of fuel and on a steep grade, more than1 gallon (3.8 liters) may be required. • The service engine soon indicator may come on. For more informationon the service engine soon indicator, see Warning ...

3. Slowly insert the fuel filler nozzle fully into the fuel system, and leavethe nozzle fully inserted until you are done pumping. 4. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about 10 seconds after pumping fuel before removing thefuel filler nozzle. This allows resi...

For consistent results when filling the fuel tank: • Turn the ignition off before fueling; an inaccurate reading results if theengine is left running. • Use the same fill rate (low–medium–high) each time the tank is filled. • Allow no more than two automatic click–offs when filling. Results are most...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not use the tow feature when driving in icy or slippery conditions as the incre...

M (Manual) (if equipped) Moving the gearshift lever to M (Manual): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower...

Paddle Shifters (If Equipped) The paddle shifters allow you to shift gears quickly, without taking yourhands off the steering wheel. Temporary manual control is providedwhen pulling the paddles with the gearshift in the D (Drive) position. The system will determine when temporary manual control is n...

Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brakelamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepri...

2. Locate the brake shift interlock lever in front of theshifter assembly. 3. Apply the brake pedal. Gently push and hold thebrake shift interlock lever while pulling the gearshiftlever out of the P (Park) position and into the N(Neutral) position. 4. Install the trim panel. 5. Apply the brake pedal...

How Utility Vehicles Differ from Other Vehicles Truck and utility vehicles can differ from some other vehicles. Yourvehicle may be higher to allow it to travel over rough terrain withoutgetting hung up or damaging underbody components. The differences that make your vehicle so versatile also make it...

Maintenance and modifications The suspension and steering systems on your vehicle have been designedand tested to provide predictable performance whether loaded or emptyand durable load carrying capability. For this reason, Ford MotorCompany strongly recommends that you do not make modifications suc...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac® system. In ...

A Vehicle without AdvanceTrac® with RSC® skidding off its intendedroute. B Vehicle with AdvanceTrac® with RSC® maintaining control on aslippery surface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. TheAdvanceTrac® with RSC® system cannot be completely t...

TERRAIN MANAGEMENT (IF EQUIPPED) This system optimizes drivability and comfort as well as maximizingtraction while operating on different types of terrain. Turn the control located on the center console to choose between thefollowing modes: 1. Grass/Gravel/Snow mode should be selected where a firm s...

If the system becomes inoperable, selecting some modes may not bepossible and a message is displayed. If it becomes inoperable due to asystem malfunction, all of the mode indicators on the control turn offand one of the following messages appears in the information display: TERRAIN MANAGEMENT SYSTEM...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

The system can be turned off using the information display control.Refer to the Information Display chapter. If a fault is present in the system, a warning message appears in theinformation display and does not allow the driver to switch the faultedsystem on. Note: If your vehicle is equipped with M...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guidelines(if enabled) have been removed when the liftgate is ajar. WARNING: Use caution when turning camera features ...

Guidelines and the Centerline Note: Active guidelines and fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Active or Fixed guidelines are on. A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Ye...

Visual Park Aid Alert Note: Visual park alert is only available when the transmission is in R (Reverse). Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The visual park aid alert allows the driver to view the area...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

WARNING: Do not use the adaptive cruise control when entering or leaving a highway, in heavy traffic or on roads that are winding, slippery or unpaved. WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in...

• the vehicle speed falls below 16 mph (26 km/h) • a new gap distance is set. The vehicle brakes will be automatically applied to slow the vehicle tomaintain a safe distance from the vehicle in front. The maximum brakingwhich is applied by the system is limited and can be overridden by thedriver app...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehiclesat all or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if the system does not detect a vehiclein front of you. Detection issues can occur: A. When drivin...

Cause Action The surface of the radar in thegrille is dirty or obstructed insome way Clean the grille surface in front ofthe radar or remove the objectcausing the obstruction The surface of the radar in thegrille is clean but the messageremains in the display Wait a short time. It may takeseveral mi...

DRIVER ALERT (IF EQUIPPED) WARNING: The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on/off setting in the information display menu through igniti...

System Display When active the system will run automatically in the background andonly issue warning if required. You can view the status at any time usingthe information display. Refer to the Information Displays chapter. The alertness level is shown by six steps in a colored bar. The current asses...

LANE KEEPING SYSTEM (IF EQUIPPED) WARNING: The system is designed to aid the driver. It is not intended to replace the driver’s attention and judgment. The driver is still responsible to drive with due care and attention. The system detects unintentional drifting toward the outside of the laneand al...

While the system is on, the color of the lane markings will change toindicate the system status. Gray: Indicates that the system is temporarily unable to provide awarning or intervention on the indicated side(s). This may be because: • the vehicle is under the activation speed • the turn indicator i...

Using the Systems BLIS® turns on when the engine is started and the vehicle is drivenforward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS®turns ...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS® and CTA systemsilluminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approachin...

System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as areplacement for using the side and rear view mirrors and looking overyour shoulder before changing lan...

System Errors If either system senses a problem with the left or right sensor, theBLIS® indicator in the information display will illuminate and remain on.Also, BLIND SPOT SYSTEM FAULT or CROSS TRAFFIC SYSTEM FAULT message will appear. When problems that may cause the left or right indicator not to ...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

Blocked Sensors If a message regarding a blockedsensor appears in the informationdisplay, the radar signals from thesensor have been obstructed. Thesensors are located behind a fasciacover near the driver side of thelower grille. When the sensors areobstructed, a vehicle ahead cannotbe detected and ...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

CARGO NETS (IF EQUIPPED) WARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the loops and anchorsprovided. ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) WARNING: When loading the roof ra...

For proper function of the roof rack system, loads must be placeddirectly on crossbars affixed to the roof rack side rails. Your vehicle maybe equipped with factory-installed crossbars. Ford Genuine Accessorycrossbars, designed specifically for your vehicle, are also recommendedfor use with your roo...

Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarketequipment. Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weigh...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Load Carrying 289 20...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

TRAILER SWAY CONTROL (IF EQUIPPED) Note: This feature does not prevent trailer sway, but reduces it once it begins. Note: This feature cannot stop all trailers from swaying. Note: In some cases, if vehicle speed is too high, the system may turn on multiple times, gradually reducing vehicle speed. Th...

Your vehicle may tow a Class I or III trailer provided the maximum trailerweight is less than or equal to the maximum trailer weight listed for yourvehicle configuration on the following chart. Engine, passengersand trailer class Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Front-wheel ...

ESSENTIAL TOWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1000 miles(1600 kilometers). • Consult your local motor vehicle laws for towing a trailer. • See the instructions included with towing accessories for the properinstallation ...

Trailer Hitch Cover Your vehicle is equipped with a removable trailer hitch trim cover. Toremove the trim cover: 1. Loosen the two 1 ⁄ 4 -turn fasteners (A) in the bottom of the cover byturning them counterclockwise. Pullthe cover rearward to remove it.The fasteners remain attached tothe cover. 2. T...

Hitches Do not use a hitch that clamps onto your vehicle’s bumper. Use aload-carrying hitch. You must distribute the load in your trailer so that 10–15% of the totalweight of the trailer is on the tongue. Do not to exceed the maximumtongue load of 500 pounds (227 kilograms) on a Class III receiver. ...

Trailer Brakes WARNING: Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not have enough braking power and your chances of having a collision greatlyincrease. Electric brakes and manual, automatic or surge-type trailer brakes aresafe if you ...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipmentto tow your vehicle. Do not tow with a ...

Front-wheel drive vehicles must have the front wheels placed on a towdolly when towing your vehicle from the rear using wheel lift equipment.This prevents damage to the transmission. Towing an all-wheel drive vehicle requires that all wheels be off theground, such as using a wheel lift and dollies o...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit someunique driving characteristics. Avoid driving too fast during the first1000 miles (1600 kilometers). Vary your speed frequently and changeup through the gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair s...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Companyoffers a complimentary roadside assistance program. This program isseparate from the New Vehicle Limited Warranty. The service is available: • 24 hours ...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 0C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM(CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located below and to the left of the steering wheel bythe brake pedal. Remove the panel cover to access the fuses.To remove a fuse use the fuse puller tool provided on the fuse panelcover. The fuses are coded as follows: Fuse or relay number Fuse am...

Fuse or relay number Fuse amp rating Protected components 5 20A Amplifier 6 5A Not used (spare) 7 7.5A Memory seat module logic feed 8 10A Not used (spare) 9 10A 4-inch radio display, Powerliftgate logic, Electronic finishpanel, SYNC 10 10A Run/accessory relay (wipers, rearwasher), Rain sensor 11 10...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealers whoare there to help you with their professional servicing expertise. We believethat their specially trained technicians are best qualifie...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Note: Make sure the hood is...

3.5L V6 EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I. Windshield washer fluid reservoir A B C D E F G H I 336 ...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the...

Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Engine Fluid Temperature Management (If Equipped) WARNING: To reduce the risk of collision and injury, be prepared that the vehicle speed may reduce and the vehicle may not be able to accelerate with full power until the fluid temperaturesreduce. Your vehicle has been designed to pull a trailer, but...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. 4. If the coolant level is normal, you may restart your engine andcontinue on. 5. If the coolant is low, add coolant, restart the engine and take yourvehicle to an authorized dealer. See Adding engine coolant in this...

When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will no...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

Washer fluids containing non-methanol antifreeze agents should be usedonly if they provide cold weather protection without damaging thevehicle’s paint finish, wiper blades or washer system. CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal inju...

If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with a solution of baking soda and water. It is recommended that the negative battery cable terminal bedisconnected from the battery if you plan to store ...

Battery management system The battery management system (BMS) monitors battery conditions andtakes actions to extend battery life. If excessive battery drain isdetected, the system may temporarily disable certain electrical featuresto protect the battery. Those electrical accessories affected includ...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm away fromthe glass. 2. Squeeze the locking tabs to r...

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is heard. If you find this procedure too difficult, please see your dealer. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and/or personal b...

Changing the Air Filter Element 3.5L V6 engine 2.0L EcoBoost® engine 3.5L V6 EcoBoost® engine 1. On the passenger’s side of the air filter housing, release the twoclamps from the air filter housing cover. 2. Lift the passenger’s side of the cover and push the cover toward thepassenger’s side. Releas...

5. Wipe the cover and the housing clean to remove any dirt or debris andto make sure the cover seals to the housing. 6. Install a new air filter element. Be careful not to crimp the filterelement edges between the housing and the cover. This could cause filterdamage and allow unfiltered air to enter...

5. Locate the vertical adjuster foreach headlamp. Using a Phillips #2screwdriver, turn the adjustercontrol either clockwise orcounterclockwise in order to adjustthe vertical aim of the headlamp. Note: HORIZONTAL AIMING IS NOT REQUIRED FOR THISVEHICLE AND ISNON-ADJUSTABLE. CHANGING A BULB Lamp Assemb...

Replacing headlamp bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. Note: If the bulb is accident...

Front parking lamp/turn signal and sidemarker bulbs 1. Make sure that the headlamp control isin the off position. 2. Open the hood. 3. Remove the hood overslam bumpertower to service park/turn or sidemarkerbulbs (if needed). Replacing front parking lamp/turn signal bulbs 1. Rotate the bulb socketcou...

Replacing fog lamp bulbs 1. Make sure the headlamp switch is off. 1. Make sure that the fog lamp switchis in the off position. 2. Remove the bulb socket from thefog lamp by turning itcounterclockwise. 3. Disconnect the electricalconnector. Reverse steps to reinstall bulb(s). Replacing turn/backup la...

Function Number of bulbs Trade number Rear license platelamp 1 W5W Front fog lamp 2 H11 Interior front maplamps 2 168 (T10) Second rowdome/courtesy lamp 2 168 (T10) * Second rowdome/map lamp n/a LED * Third row cargolamp n/a LED Visor vanity lamp -Slideon rail system(SOR) 2 A6224PF All replacement b...

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

2. Wipe the surface with a damp, clean, white, cotton cloth. For morethorough cleaning, use a mild soap and water solution. If the spot cannotbe completely cleaned by this method, the area may be cleaned using acommercially available cleaning product designed for automotiveinteriors. 3. If necessary...

• Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Industrial-strength (heavy-duty) cleaners, orcleaning chemicals, in combination with brush agitation to removebrake dust and dirt, could wear away the clearcoat finish over time. • Do not use hydrofluoric acid-ba...

Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricateworking parts and prevent corrosion. Removing Vehicle from Storage When your vehicle is ready to come out of sto...

GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: • Avoid sharp turns and abrupt maneuvers; • Dri...

Power is supplied to all four wheels through a transfer case or powertransfer unit. Four-wheel drive vehicles allow you to select different drivemodes as necessary. You can find information on transfer case operationand shifting procedures in the Transmission chapter. You can find information on tra...

• Narrower – to provide greatermaneuverability in tight spaces,particularly in off-road use. As a result of the above dimensionaldifferences, sport-utility vehicles,vans and trucks often will have ahigher center of gravity and agreater difference in center ofgravity between the loaded andunloaded co...

• The Sport optional P265/45ZR20 tires were designed for track use andmay exhibit significantly reduced tread life and increased tire noisecompared to the standard equipment tires under normal drivingconditions. Increasing the front camber settings beyond the factorysettings may further accelerate t...

U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give youthe following information about tire grades exactly as the governmenthas written it. Treadwear The treadwear grade is a comparative rating based on the wear rateof the ...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturersto place standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower thanthe others, use a tire gauge to check pressure o...

Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum loadcan be carried by the tire. This pressure is normally higher than themanufacturer’s recommended cold inflation pressure, which can be foundon the Safety Compliance Certificatio...

5. Repeat this procedure for each tire, including the spare. Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size a...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in af...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you are driving, the wheels maybe out of alignment. Have an authorized dealer check the wheelali...

SUMMER TIRES (IF EQUIPPED) Summer tires provide superior performance on wet and dry roads.Summer tires do not have the Mud and Snow (M+S or M/S) tire tractionrating on the tire side wall. Since summer tires do not have the sametraction performance as All-season or Snow tires, Ford does notrecommend ...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge.See Inflating Your Tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall iton the vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, the tire pressure monitoring system sensor andvalve stem on the wheel must be replaced by an authorized Ford dealer. WARNING: See Tire P...

The usage of a full-size dissimilar spare tire and wheel assembly can leadto impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Make sure that any f...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 EcoBoost engine 2.0L EcoBoost engine Cubic inches 213 214 122 Required fuel Minimum 87 octane Minimum 87 octane Minimum 87 octane Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignitionsystem EDIS Coil on plug Coil on plug Spark pluggap 0.049-0.053 i...

Engine Drivebelt Routing 3.5L / 3.5L V6 EcoBoost engines 2.0L EcoBoost engine (if equipped with drivebelt routing 1) 2.0L EcoBoost engine (if equipped with drivebelt routing 2) A. Long drivebelt on the first pulley groove closer to the engine B. Short drivebelt on the second pulley groove farther fr...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver’s sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacture...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

Peace of mind • Keyless entry keypad • Cargo shade • Vehicle security systems • Locking gas plug for capless fuel system • Wheel locks • Remote start • Parking sensors* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designe...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • r...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designat...

Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concern or that the fluidneeds to be changed. However, discolored fluids that also show signs ofoverheating and foreign material contamination should be in...

Normal scheduled maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level(if equipped with dipstick...

Other maintenance items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 150000 ...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a leak is s...

Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirtyconditions. Vehicles operated in these conditions require frequentinspection and replacement of the engine air filter and cabin air filter. ENGINE COOLANT CHAN...

• Do not leave playing devices in your vehicle during extreme conditionsas it could cause them damage. See your device’s manual for furtherinformation. • Do not attempt to service or repair the system. See your authorizeddealer. For your safety, some SYNC functions are speed-dependent. Their useis l...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

When you select: You can: Phonebook 1,2 Allows you to access your downloadedphonebook.1. Press OK to confirm and enter. If yourphonebook has fewer than 255 listings, theyappear alphabetically in flat file mode. If thereare more, they are organized into alphabeticalcategories.2. Scroll until the desi...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book(i.e., add, delete, download). Press OK toselect and scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, U.S. only): Provides ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report Options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

If you miss a turn, SYNC automatically asks if you want the routeupdated. Just say, “Yes” when prompted and a new route will bedelivered to your vehicle. Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC...

“USB” “Search song <name>” 1 “Search track <name>” 1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Voic...

Voice Command Guide “Refine” This allows you to make your previouscommand more specific. For example, if youasked to search and play all music by acertain artist, you could then say “refinealbum” and choose a specific album from thelist to view. If you then select Play, the systemonly plays music fr...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on thesize of the med...

When you select: You can: Media Settings Choose to shuffle or repeat your music andselect your Autoplay settings. Once theseselections are turned on, they remain on untilturned off. Press SEEK to play the previousor next track. Note: Some digital media players require both USB and line in ports to s...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compile aplaylist for you.Press OK to select. The system creates a newlist of similar songs and begins playing. Themetadata tags must be p...

4. Press OK and then scroll to select from: When you select: You can: Add BluetoothDevice * Allows you to pair additional devices to thesystem.1. Press OK to select and press OK againwhen Find SYNC appears in the display.2. Follow the directions in your phone’s userguide to put your phone into disco...

Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Cause(s) Possible Solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnumber) list...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agains...

SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’soption package and software, your screens may vary in appearance from the descriptions in this section. Your features may alsobe limi...

Safety Information WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take theirfocus off the road. Your primary responsibility is the safe operation ofthe vehicle. We ...

The cellular profile, media device index, and development log remain inthe vehicle unless you delete them and are generally accessible only inthe vehicle when the cellular phone or media player is connected. If youno longer plan to use the system or the vehicle, we recommend youperform a Master Rese...

Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Windnoise from open windows and road vibrations may prevent the systemfrom correctly recognizing spoken commands. • After pressing the voice icon, wait until after the tone sounds andListening appears before saying a com...

Some of the voice commands that are available while viewing this screenare: “INTERSECTION” “Enter first street name” “Change first street name” “Enter second street name” “Change second street name” “Enter city” “Change city” “Enter state” “Change state” The dual mode feature is also available when ...

Browsing Device Content When listening to any type of audio, you can browse through other devices without having to change sources. For example, if you are currently listening to the radio, you can browse all the artists that arestored on your USB device. Press the voice icon on the steering wheel. ...

current audio source you are listening to (such as a USB device orSIRIUS satellite radio). Note: This is only available when your MyFord Touch® system language is set to North American English. “AM <530 - 1710>” “FM <87.7 – 107.9>” “<530 - 1710>” “<87.7 – 107.9>” “<0-233&g...

HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength. If you are listening to HD1, the systemswitches back to the analog broa...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

“TUNE” “FM” “Preset <#>” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. SIRIUS® Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory pre...

Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel control. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, say “Sirius...

“TUNE” “SAT 3” “SAT 3 preset <#>” “Help” SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMot...

Potential Satellite Radio Reception Issues Station overload When you pass a ground-basedbroadcast-repeating tower, a stronger signalmay overtake a weaker one and the audiosystem may mute. Satellite radio signalinterference Your display may show ACQUIRING . . . toindicate the interference and the aud...

SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Updating. Update of channelprogramming inprogress. No action required.The process may takeup to three minutes. Call SIRIUS1–888–539–7474. Your satellite service isno longer available. Contact SIRIUS at1-888-539-7474 toresolve subscr...

Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on a...

SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. Note: The navigation system also uses this card slot. See Navigation system late...

Playing Music from Your Device Insert your device and select the SD Card or USB tab once the system recognizes it. You can then select from the following options: Repeat replays the currently playing song or album. Shuffle plays music on the selected album or folder in random order. Similar Music al...

SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press thevoice button on the steering wheel control. When prompted, sayany of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, say...

Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers fromyour connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, thenselect the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio ...

Troubleshooting • Do not connect the audio input jack to a line level output. The jackonly works correctly with devices that have a headphone output witha volume control. • Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio as this c...

Phone Menu Options Press the top left corner on your touchscreen to select from thefollowing options: Phone Touch this button to access the on-screen numerical pad to enter anumber and place a call. During an active call, you can also choose to: • Mute the call • Put it on hold • Turn on privacy (re...

Messaging Send text messages using your touchscreen. See Text messaging later in this section. Settings Touch this button to access various phone settings, such turningBluetooth on and off, managing your phonebook and more. See Phone settings later in this section. Text Messaging Note: Downloading a...

Phone Settings Press Phone > Settings. Bluetooth Devices Touch this tab to connect, disconnect, add or delete a device, as well assave it as a favorite. Bluetooth Touch this tab to turn Bluetooth off or on. Do Not Disturb Touch this tab if you want all calls to go directly to your voice mail andn...

INFORMATION If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A. SYNC® Services B...

Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicleis not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Services. 1. Select Connect to Servic...

If you miss a turn, SYNC automatically asks if you want the routeupdated. Just say, “Yes” when prompted and the system delivers a newroute to your vehicle. If your vehicle is equipped with Navigation, SYNC Services downloadsyour requested destination to the navigation system. The navigationsystem th...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel control. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summa...

When you subscribe to SIRIUS Travel Link, it can help you locate thebest gas prices, find movie listings, get current traffic alerts, view thecurrent weather map, get accurate ski conditions and see scores tocurrent sports games. If your vehicle is equipped with Navigation, touch thei (Information) ...

SIRIUS Travel Link Voice Commands Note: In order to use SIRIUS Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button on the steering wheel controls and, whenprompted, say any of the following: Travel Link voice comm...

Setting 911 Assist On If your vehicle is equipped with Navigation, touch thei (Information) button to access these features. If your vehicleis not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Apps > 911 Assist, then select On. You can also access 911 Ass...

Note: In order to allow a break-in period for your vehicle, you may not be able to create a Vehicle Health Report until your vehicle odometer hasreached 200 miles. Note: Cellular phone and SMS charges may apply when making a report. Register for Vehicle Health Report and set your report preferences ...

SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust thedisplay, sound and vehicle settings as well as access settings forspecific modes or the help feature. Clock Note: You cannot manually set the date. Your vehicle’s GPS do...

From this screen, you can also make other adjustments, such as 12– or24–hour mode, activate GPS time synchronization and have the systemautomatically update for daylight savings time and new time zones. You can also turn the outside air temperature display on and off. Itappears at the top center of ...

Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass THX Deep Note Demo * Midrange DSP * Treble Occupancy Mode * Set Balance and Fade Speed Compensated Volume * If equipped. Vehicle Press the Settings icon > Vehicle, then select from the following: • Activ...

When done making your selections, press Run Vehicle Health Report Now if you want your report. Door Keypad Code To change the keypad code for your keyless entry keypad system:1. Press the Settings icon > Vehicle > Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the sys...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

L. Driver settings: Depending on your vehicle and option package, you may have the following features: • Touch + or – to adjust the temperature. • If your vehicle is equipped with heated seats, touch the heated seaticon to control the heated seat. See the Seats chapter. • If your vehicle is equipped...

Additional climate control voice commands “Floor on” “Temperature <60–85> degrees” “Max A/C off” “Temperature decrease” “Max A/C on” “Temperature high” “My temp” “Temperature increase” “Off” “Temperature low” “On” “Windshield floor on” “Panel floor on” “Help” * If you have said “Temperature”, ...

Setting a Destination Press the green corner of your touchscreen, then Dest when it appears. Choose any of the following: Destination Selections My Home Street Address Favorites Intersection Previous Destinations City Center Point of Interest Map Emergency Edit Route Cancel Route Previous Starting P...

cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 154 cities (132 in the U.S., 13 in Canada and 9 in Mexico). cityseekr, when available, is a service thatprovides more information about certainpoints of interest such as restaurants,hotels and attracti...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr also tellsyou if the hotel has certain services and facilities using icons. Hotel Services and Facilities Restaurant 24 Hr Room Service Business Center Fi...

Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press the Settings icon > Settings > Navigation. When you select: You can: Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom...

When you select: You can: Traffic Preferences Choose how you want the system to handletraffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop andimpact the current route (no notification isprovided). Manual: Have the system always provide a t...

Change the appearance of the mapdisplay by repeatedly pressing thearrow button in the upper leftcorner of the screen. It togglesbetween three different map modes:Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen. This view is av...

Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scrollmode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursoris in a window on the top center p...

“DESTINATION” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” ...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”)from an affiliate of Microsoft Corporation (“MS”). Those installed softwareproducts of MS origin, as well...

DEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE on your DEVICEto access their content. If you decline an upgrade, you will not be ableto access content that requires the up...

laws and treaties. This EULA grants you no rights to use such content.All rights not specifically granted under this EULA are reserved by MS,Microsoft Corporation, FORD MOTOR COMPANY, third party softwareand service providers, their affiliates and suppliers. Use of any on-lineservices which may be a...

End user notice Microsoft® Windows® Mobile for Automotive Important SafetyInformation This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering or ...

use of the TeleNav Software is also subject to such terms. You agree tocomply with the following additional terms and conditions, whichare applicable to TeleNav’s third party vendor licensors: NavTeq End User License Agreement END USER TERMS The content provided (“Data”) is licensed, not sold. By op...

Disclaimer of Liability: NT AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU INRESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OFTHE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTIONALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,WHICH MAY RESULT ...

Gracenote® End User License Agreement (EULA) This device contains software from Gracenote, Inc. of 2000 Powell StreetEmeryville, California 94608 (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables thisdevice to do disc and music file identification and obtain music-related...

THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATAAND THE GRACENOTE CONTENT ARE LICENSED TO YOU “AS IS.”NEITHER GRACENOTE MAKES ANY REPRESENTATIONS ORWARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ACCURACYOF ANY GRACENOTE DATA FROM THE GRACENOTE SERVERS ORGRACENOTE CONTENT. GRACENOTE COLLECTIVELY AN...

911 Assist™ ......................453, 529 A ABS (see Brakes) .....................239 Accessing and using yourUSB port ....................................507 Accessing call history/phonebook during active call .............443 Accessing your calendar ..........528 Accessing your media menufeatures...

replacement, specifications ...409servicing ..................................349 Blind Spot InformationSystem .......................................273 Booster seats ...............................23 Brakes ........................................238 anti-lock ...................................23...

second row seats ....................179third row seats ........180, 185–186 Second-row power fold seat ....183 SecuriCode keyless entrysystem ..........................................82 SecuriLock passive anti-theftsystem ..........................................84 Selecting your media source(USB...