Ford 2012 Focus v.5- User Manual

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner’s Guide. Special instructions For your added safety, your vehicl...

CELL PHONE USE The use of mobile communications equipment has become increasinglyimportant in the conduct of business and personal affairs. However,drivers must not compromise their own or others’ safety when usingsuch equipment. Mobile communications can enhance personal safetyand security when app...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Instrument cluster with standard measure shown; metric similar Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.M...

Solid illumination after the engine is started indicates the on-boarddiagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic co...

Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected. Contact yourauthorized dealer as soon aspossible. Normal braking is still functional unless the brake warning lightalso is illuminated. Airbag readiness: If this light fails to illuminate...

AdvanceTrac 威 off light: Illuminates whenAdvanceTrac 威 /Traction control has been disabled by the driver. Refer tothe Driving chapter for more information. Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure shou...

GAUGES Base cluster shown in standard measure; uplevel cluster andmetric similar. 1. Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scalemay damage the engine. 2. Multifunction display: This is used to configure d...

Odometer : The odometer is displayed in the cluster and registers the total accumulated distance the vehicle has traveled. Trip odometer: Registers the distance of individual journeys. • Standard instrument cluster: Press the reset stem once to switch from the odometer to trip odometer . To reset th...

Menu Scroll up/down to highlight one of the options, then press the right arrowkey or OK to enter into that menu option. Trip 1 and 2 Trip odometer — shows the accumulated trip distance. Displayed inthe middle line and is denoted by a 1 or 2 next to the highway symbol. Trip timer — shows the elapsed...

UP-LEVEL MESSAGE CENTER (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the saf...

Settings Convenience Compass(non–navigationsystems only) Show On or Off Set Zone (1–15)See the diagrambelow todetermine yourmagnetic zone. Calibrate Hold OK toCalibrate Remote Start Climate Control Heater – A/C /Auto or LastSetting Front Defrost /Auto or Off Rear Defrost /Auto or Off (5, 10 or15 min...

Settings (cont’d) MyKey Create MyKey Hold OK to Create MyKey Traction Ctrl Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Warning 45 mph (75 km/h), 55 mph(90 km/h), 65 mph (105 km/h) orOff Volume Limiter On or Off Clear MyKeys Hold OK to Clear All MyKeys System Reset Hold OK t...

Tire pressure Monitoring System (TPMS) Message Action / Description Tire Pressure Sensor Fault Amber Displays when a tire pressuresensor is malfunctioning, oryour spare tire is in use. Formore information on how thesystem operates under theseconditions, refer to Understanding Your TirePressure Monit...

AUDIO SYSTEMS AM/FM/CD/MP3 system (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility ...

• Audio Menu: Scroll to select Audio and then move right to enter the menu. Scroll to select from: • SCV level (if equipped): Scroll to select Speed compensated volume and move right to enter the menu. This featureautomatically adjusts the volume to compensate for speed andwind noise. You can set th...

4. Sound menu: Press access Treble, Bass, Fade (if equipped) and Balance menu options. Use / to cycle through the various options. When the desired option is chosen, press / to increase or decrease the levels. Press OK to set or MENU to exit. 5. Memory presets: To save a station, tune to the desired...

11. CD: Press to enter CD mode. Use the soft keys to select from possible on-screen options of play/pause, Rpt (repeat), and Shuff(shuffle). 12. / (Reverse/Fast forward): Press to access the previous/next track. Press and hold for a fast reverse or advance througha track. 13. (Eject): Press to eject...

MyFord Touch™ WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take theirfocus off the road. Your primary responsibility is the safe operation ofthe vehicle. We recom...

To play your portable music player using the auxiliary input jack: 1. Begin with the vehicle parked and the radio turned off. 2. Ensure that the battery in your portable music player is new or fullycharged and that the device is turned off. 3. Attach one end of the audio extension cable to the headp...

USB Port WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the vehicle. We...

GENERAL AUDIO INFORMATION Radio frequencies: AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception factors: There...

Don’t: • Expose discs to direct sunlight or heat sources for extended periodsof time. • Clean using a circular motion. CD units are designed to play commercially pressed 4.75 in(12 cm) audio compact discs only. Due to technicalincompatibility, certain recordable and re-recordable compactdiscs may no...

Troubleshooting Radio Display Condition Action Required ACQUIRING Radio requires morethan two seconds to produce audio for the selected channel. No action required. This message should disappear shortly. SAT FAULT Internal module or system failure present. If this message does not clear within a sho...

SYNC 姞 (IF EQUIPPED) Note: The following SYNC 威 information is to be used in conjunction with the vehicle’s compatible audio systems listed on the previous pages. Thissection is NOT to be used in conjunction with the touchscreen system(MyFord Touch™). If you have the MyFord Touch™ system, please ref...

Added benefits SYNC 威 even has some benefits which extend beyond your car. You can: • Access on-line support • Chat with other SYNC 威 owners • Search for and download new applications • Check frequently asked questions (FAQs) • Check your phone and other devices’ compatibility • Register and set up ...

• “Vehicle Health Report” (if equipped, U.S. only): Say to run a health report. • “ Services” (if equipped, U.S. only): Say to access the SYNC Services portal. System interaction and feedback The system provides feedback through audible tones, prompts, questionsand spoken confirmations depending on ...

Helpful Hints • Ensure that the interior of the vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent thesystem from correctly recognizing spoken commands. • After pulling , ensure that you wait until after the tone sounds and Listening appears in the display ...

Pairing a phone for the first time The first thing you must do to use a phone with the system is towirelessly pair your phone with SYNC. Doing so allows your phone tocommunicate with the hands-free system, thereby enabling you to makeand receive hands-free calls. Note: To scroll through the menus, p...

Pairing subsequent phones Once you have a phone paired with the system, the steps to pair anotherphone is a bit different. To pair a subsequent phone: Note: To scroll through the menus, press / . 1. Ensure that the vehicle ignition and radio are turned on and thatyou are in P (Park). 2. Press PHONE ...

• Phone book <name> on Other 1 • Connections 1 • Call history missed 1 • Go to privacy • Menu** 1 • Hold • Join 1 Voice commands are not available until downloading phone information via Bluetooth is complete. 2 Voice commands which are available at the first level (without having to say, “Pho...

At any time, you can say the following global commands: • SYNC • USB • Line in • Bluetooth Audio • Phone • Voice settings • Cancel • Vehicle Health Report (if equipped, U.S. only) • Services (if equipped, U.S. only) • Help Making a call To make a call, pull and when prompted say: • “Call <name>...

Phone options during an active call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Scrolling through the menus: Use / to scroll through the menu options. To access: 1. Press MENU during an active call to enter the Ac...

Maneuvering the phone menu Below is a graphical representation of how the phone menu lays out inyour system. It will be explained in more detail in this chapter, but thismay help you to better visualize the menu structure. + Denotes submenus with additional menu items Scrolling through the menus: Us...

Accessing features through the phone menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as accessingphone and system settings. You can also access advanced features suchas 911 Assist™, Vehicle Health Report and SYNC Services. T...

Text messaging SYNC allows you to receive, send, download and delete text messages.The system will even read incoming text messages to you so that you donot have to take your eyes off the road. Note: This is a phone dependent feature. Receiving a text message Note: This is a phone dependent feature....

3. Scroll to select from the following options: Send Text Message? : Enables you to send a new text message based on a predefined set of 15 messages. 1. Press OK to select. If the system detects your phone does notsupport this feature, Unsupported will appear in the display and SYNC will return you ...

Modify Phonebook : Allows you to modify the contents of your phone book (i.e. add, delete, download). Press OK to select and scroll to cycle through the following options: • Add Contacts: Press OK to add more contacts from your phone book. ’Push’ the desired contact(s) on your phone. Refer to yourph...

Bluetooth Device menu options This menu allows you to add, connect, delete, set a phone as primary, aswell as turn Bluetooth on and off. To access: 1. Press PHONE or to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3. Scroll until Bluetooth Devices appears and select OK...

Set As Primary Phone? : Select to set a previously paired phone as your primary phone. SYNC will attempt to connect with the primaryphone at every ignition cycle. • Press OK to select and scroll to select the desired phone. Press OK to confirm. Note: When a phone is selected as primary, it will appe...

Accessing and using your SYNC applications and Services(if equipped) In addition to the standard phone and media options which SYNC offers,your system also includes advanced features such as: • 911 Assist™: Can alert 911 in the event of an emergency. • Vehicle Health Report (if equipped, U.S. only):...

To connect to SYNC 威 Traffic, Directions & Information Services using the phone menu: 1. Press or PHONE to enter the Phone Menu. 2. Scroll repeatedly until Services appears in the display. 3. Press OK to confirm and enter the Services menu. The display willindicate the system is connecting. 4. P...

Portable: Your SYNC TDI Services subscription is associated with your Bluetooth enabled cellular phone number, not your VIN (Vehicle Identification Number). Thus, you can use your SYNC TDI Service withany vehicle equipped with Traffic, Directions and Information. Simplypair and connect your phone to...

911 Assist™ (if equipped) For 911 Assist™ to function properly, the vehicle must havebattery power after the crash, the cell phone must be previouslypaired, connected to SYNC 威 , and continue to function properly with the ability to make and maintain a 911 call initiated bySYNC 威 , and the 911 Assis...

Vehicle health report (if equipped, U.S. only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Reports supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle He...

You can initiate a Vehicle Health Report in the vehicle and view thecomplete report with all information listed above on SyncMyRide.com.You can also choose for SYNC 威 to automatically remind you to run reports at specific mileage intervals. After you’ve registered for theVehicle Health Report servic...

Media features with SYNC SYNC 威 allows you to access and play music from your digital musicplayer over the vehicle’s speakersystem using the system’s mediamenu or voice commands. You can also choose to sort and playyour music by specific metadatacategories such as: • Artists • Albums • Genres • Play...

6. Press OK and scroll through selections of: • Play All • Albums • Genres • Playlists • Tracks • Explore USB • Similar Music • Return 7. When the desired selection appears in the display, press OK tobuild your desired music selection. For more information, refer to Accessing your play menu later in...

• Search album <name> 1 • Refine album <name> 1 • Refine artist <name> 1 • Refine track <name> 1 • Connections 1 Voice commands which are not available until indexing is complete. 2 Voice commands which are only available in folder mode. For more information, refer to Explori...

Maneuvering the media menu Below is a graphical representation of how the phone menu lays out inyour system. It will be explained in more detail in this chapter, but thismay help you to better visualize the menu structure. + Denotes submenus with additional menu items Scrolling through the menus: Pr...

Accessing the features of your media menu SYNC’s media menu allows you to select which source you would like tolisten to, how you would like to play your music (by artist, genre, shuffle,repeat, etc.), and also if you need to add, connect or delete devices. To access your media menu: 1. Press AUX an...

Troubleshooting Your SYNC 威 system is easy to use. However, should questions arise, please refer to the tables below as well as the Helpful Hints section that follows. Use the website at any time to check your phone’s compatibility, registeryour account and set preferences as well as access a custom...

• SOFTWARE Transfer: You may permanently transfer your rights under this EULA only as part of a sale or transfer of the DEVICE,provided you retain no copies, you transfer all of the SOFTWARE(including all component parts, the media and printed materials, anyupgrades, and, if applicable, the Certific...

• Internet-Based Services Components: The SOFTWARE may contain components that enable and facilitate the use of certainInternet-based services. You acknowledge and agree that MS, MicrosoftCorporation, FORD MOTOR COMPANY, third party software andservice suppliers, their affiliates and/or their design...

PRODUCT SUPPORT: Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or theiraffiliates or subsidiaries. For product support, please refer to FORDMOTOR COMPANY instructions provided in the documentation for theDEVICE. Should you have any questions co...

WARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not changesystem settings or enter data non-verbally (using your hands) whiledriving. Stop the vehicle in a safe and legal ma...

SINGLE ZONE MANUAL SYSTEM (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to the Message Center section of the Instrument Cluster chapter. 1. (Fan speed adjustment): Turn to select the desired fan speed. 2. (Recirculated air): Press to activate/deactivate air re...

5. Multifunction control: Turn to manually choose one of the following air distribution modes: • (Panel): Distributes air through the instrument panel vents. • (Floor and Panel): Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents. • (Floor): Dis...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C position, reduce blower fan speed from the highest settingand put the vehicle’s transmission into the P (Park) gear position(automatic transmission only...

DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM(IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius: Press MENU > Display Settings > Temp. Setting. If your vehicle isequipped with the touchscreen system, press Menu > Settings > System> Temperature. 1. (Power...

• Remove any snow, ice or leaves from the air intake area at the base ofthe windshield. • To improve the A/C cool down, drive with the windows slightly openfor 2–3 minutes after starting the vehicle or until the vehicle has“aired out.” • A small amount of air may be felt from the floor vent regardle...

REAR WINDOW DEFROSTER R The rear defroster control is located on the climate control panel andworks to clear the rear window of fog and thin ice. The engine must be running to operate the rear window defroster. Press R to turn the rear window defroster on. An indicator light on the control will illu...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Note: The head lamp indicator will illuminate when the head lamps are activated. Autolamp control (if equipped) The autolamp system provides lightsensi...

Fog lamp control (if equipped) The fog lamps can be turned onwhen the headlamp control is in the , , or positions and the high beams are not turnedon. • Press the fog lamp control,located on the instrument panel,to activate the fog lamps. • Press the fog lamp control againto deactivate the fog lamps...

WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps under these conditions may result i...

• Tap the left control to dim allinterior lit componentsincrementally, or • Press and hold the left controluntil the desired lighting level isreached. Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to themaximum setting...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

Ambient lighting (if equipped) Illuminates the interior with achoice of several colors. Theambient lighting control switch islocated in the overhead console. • Rotate the control knob past thefirst detent to activate and adjustto the desired brightness. • Press the left color pallet switchto cycle t...

Replacing headlamp bulbs 1. Make sure the headlamp controlis in the off position and open thehood. 2. Remove the two screw from theheadlamp assembly. 3. Carefully pull the headlampassembly up and away from thevehicle. Low beam headlamp: • Remove service cap anddisconnect the electricalconnector. • R...

WINDSHIELD WIPERS Move the lever down for a singlewipe. Move the control up one position for intermittent operation.Adjust the rotary control to thedesired speed. Move the control up two positionsfor low-speed wiping or three positions for high-speed wiping. The wipers may be moved manually with the...

Windshield washer Pull the control toward you to activate the windshield washer. Release the control to stop washer fluid spray. The wipers will operatefor a short time after the washer is turned off. Courtesy wipe feature One extra wipe will happen a few seconds after washing the frontwindow to cle...

Window lock The window lock feature allows onlythe driver and front passenger tooperate the power windows. To lock out all the window controls(except for the driver’s and frontpassenger’s) press the control. Alight on the control will illuminatewhen the windows are locked. Pressthe control again to ...

Fold-Away Mirrors Fold the side mirrors in carefullywhen driving through a narrowspace, like an automatic car wash. Blind spot mirrors Your vehicle is equipped with blind spot mirrors. Refer to Blind spot mirrors in the Driving chapter. SPEED CONTROL (IF EQUIPPED) With speed control set, you can mai...

Turning off speed control To turn off the speed control, press and release OFF or turn off theignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) Audio control features (if equipped) Press the arrow...

UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED) Your vehicle may be equipped with a universal garage door opener whichcan be used to replace the common hand-held transmitter. HOMELINK 姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruc...

2. Return to your car. 3. Press and hold the functionbutton you want to program for2 seconds, then release. Repeat thisstep. Depending on the brand ofgarage door opener you may needto repeat this sequence a third time. To program additional buttonsrepeat steps one through four. For questions or comm...

Operating the HomeLink 姞 Wireless Control System To operate, simply press and releasethe appropriate HomeLink 威 button. Activation will now occur for thetrained product (garage door, gateoperator, security system, entrydoor lock, or home or office lightingetc.). For convenience, thehand-held transmi...

POSITIVE RETENTION FLOOR MAT WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

KEYS Integrated keyhead transmitters (IKTs) (if equipped) Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade is used tostart the vehicle and unlock/lock thedriver’s door from outside thevehicle. The transmitter portionfunctions as the remote entrytransmitter. Y...

Intelligent Access Key (IA key) (if equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote entry system. You have tohave the IA key in the vehicle toactivate the push button startsystem. The IA key also contains a removablemechanical key bla...

admin keys are programmed to the vehicle, and see the total distancethe vehicle has been driven with the MyKey 威 active. MyKey 威 restricted features Standard settings – these settings cannot be changed • Belt-Minder 威 cannot be cleared and will not expire. The audio system will be muted whenever Bel...

Using MyKey 威 with remote start systems MyKey 威 is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer for a Ford-approved remote start system. Vehicles equipped with traditional keys: When using a Fo...

Autolock (If Equipped) The autolock feature will lock all the doors when: • all doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 4 mph (7 km/h). If a door is unlocked, the autolock feature will repeat when...

REMOTE ENTRY SYSTEM (IF EQUIPPED) FCC ID: LXP-RX4318 IC: 2298A-RX4318 The integrated keyhead transmitters (IKTs) and intelligent access keys(IA key) comply with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device may not c...

Intelligent access (if equipped) Your intelligent access system uses a radio frequency (RF) signal tocommunicate with your vehicle and authorize your vehicle to unlockwhen commanded (either by touching the inside of any exterior doorhandle, the luggage compartment handle, or a button on the transmit...

The battery saver feature will turn off the lamps 10 minutes after theignition is turned off. Two-stage unlocking may be disabled or enabled by simultaneouslypressing the and controls on the transmitter for four seconds (disabling two stage unlock allows all vehicle doors to unlocksimultaneously). T...

Replacing lost remote entry transmitters Replacing lost integrated keyhead transmitters (IKTs) If you would like to have your integrated keyhead transmittersreprogrammed because you lost one, or would like to buy additionalIKTs, you can either reprogram them yourself, or take all IKTs to yourauthori...

Battery saver The battery saver will shut off the lamps 10 minutes after the ignitionhas been turned off. • If the dome lamps were turned on using the panel dimmer control, thebattery saver will shut them off 10 minutes after the ignition has beenturned off. • If the courtesy lamps were turned on be...

Programming spare integrated keyhead transmitter (IKT) keys If you have intelligent access keys, refer to Programming spare intelligent access keys in this section. You can program your own integrated keyhead transmitters or standardSecuriLock 威 coded keys to your vehicle. This procedure will progra...

If the key has been successfully programmed it will start the vehicle’sengine and will operate the remote entry system (if the new key is anintegrated keyhead transmitter). If the key was not successfully programmed, it will not start yourvehicle’s engine and/or will not operate the remote entry fea...

Disarming the system You can disarm the system by any of the following actions: • Unlock the doors by pressing the control on your remote entry transmitter. • Turn the ignition on or start the vehicle. • If using a key in the driver’s door to unlock the vehicle, a chime willsound when you open the d...

WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seatback to an up...

REAR SEATS Second row head restraints Outboard seat positions Your vehicle is equipped with removable outboard head restraints. WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restra...

Center seat position Your vehicle is equipped with a second row center head restraint that isvertically adjustable and removable. The adjustable center head restraintconsists of: • a trimmed energy absorbing foamand structure (1), • two steel stems (2), • a guide sleeve adjust/releasebutton (3), • a...

Flip up seat cushions (ifequipped) For additional cargo space, you maybe able to flip the seat cushions upbefore folding the seatback. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. Make sure that the safety b...

How does the Personal Safety System work? The Personal Safety System can adapt the deployment strategy of yourvehicle’s safety devices according to crash severity and conditions. Acollection of crash sensors provides information to the Restraints ControlModule (RCM). During a crash, the RCM may acti...

very close to the airbag. For other occupants, this occurs when theoccupant is not properly restrained by safety belts or child safety seatsand they move forward during pre-crash braking. The most effective wayto reduce the risk of unnecessary injuries is to make sure all occupantsare properly restr...

SAFETY BELT SYSTEM WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the veh...

WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a childanywhere near them. WARNING: Front and rear seat occupants, including pregnant women, should wear safety belts fo...

Restraint of pregnant women WARNING: Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of the safety belt should fit snug and be positioned low across the hips. Theshoulder portion of the safety belt should be positioned across thechest. Pregnant...

When to use the automatic locking mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. Children12 years old and under should be properly restrained in a rear seatingposition whenever possible. Refer to Safety restrai...

Safety belt extension assembly If the safety belt is too short when fully extended, a safety belt extensionassembly can be obtained from an authorized dealer. Use only extensions manufactured by the same supplier as the safetybelt. Manufacturer identification is located at the end of the webbing ont...

Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and achime sounds to remind the occupants to fasten their safety belts. Conditions of operation If... Then... The driver’s safety belt is notbuckled before the ignitionswitch is turned t...

If... Then... The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the onposition or less than1-2 minutes have elapsed sincethe ignition switch has beenturned to on... The Belt-Minder 威 feature will not activate. The driver’s or frontpassenger’s safety bel...

Important SRS precautions The SRS is designed to work withthe safety belt to help protect thedriver and right front passengerfrom certain upper body injuries.Airbags DO NOT inflate slowly;there is a risk of injury from adeploying airbag. WARNING: All occupants of the vehicle, including the driver, s...

WARNING: Do not attempt to service, repair, or modify the airbag supplemental restraint systems or its fuses. Contact your authorized dealer as soon as possible. Children and airbags Children must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restraine...

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion pr...

passenger airbag is disabled, the ⬙ pass airbag off ⬙ lamp may or may not be illuminated according to the table below. Objects Pass Airbag OffIndicator Lamp PassengerAirbag Small (i.e. three-ring binder,small purse, bottled water) Unlit Disabled Medium (i.e. heavy briefcase,fully packed luggage) Lit...

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit. If the airbag readiness lamp is lit, do the following: The driver and/or adult passengers should check for any objects thatmay be lodged underneath the front passenger ...

How does the side airbag system work? The design and development of the side airbag system includedrecommended testing procedures that were developed by a group ofautomotive safety experts known as the Side Airbag Technical WorkingGroup. These recommended testing procedures help reduce the risk ofin...

restrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openings. The side air curtains are mounted to the sheet metal above the first andsecond row seats. In certain lateral collisions, the air cur...

Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required. A difficulty with the syst...

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make ...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision, which may result in serious injury ordeath. WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase ...

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle. If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestrained properly, then restrain the child in the c...

Perform the following steps when installing the child seat withcombination lap/shoulder belts: Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat. 1. Position the child safety seat in aseat with a combination lap a...

3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingf...

Attaching child safety seats with tether straps Many forward-facing child safety seats include a tether strap whichextends from the back of the child safety seat and hooks to an anchoringpoint called the top tether anchor. Tether straps are available as anaccessory for many older safety seats. Conta...

Child booster seats The belt-positioning booster (booster seat) is used to improve the fit ofthe vehicle safety belt. Children outgrow a typical child seat (e.g.,convertible or toddler seat) when they weigh about 40 lb (18 kg) and arearound four (4) years of age. Consult your child safety seat owner...

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, and lets you adjust the shoulder belt to cross the chest andrest snugly near the center of the shoulder. The drawings below comparethe ideal fit (cente...

Follow all instructions provided by the manufacturer of the booster seat. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collis...

IMPORTANT INFORMATION FOR235/40R18 LOW-PROFILE TIRESAND WHEELS If your vehicle is equipped with 235/40R18 tires, they are low-profiletires. These tires and wheels are designed to give your vehicle a sportappearance. With low-profile tires, you may notice an increase in roadnoise and faster tire wear...

graded 100. The relative performance of tires depends upon the actualconditions of their use, however, and may depart significantly from thenorm due to variations in driving habits, service practices, anddifferences in road characteristics and climate. Traction AA A B C WARNING: The traction grade a...

At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflateall tires to the inflation pressure recommended by Ford Motor Company. WARNING: Under-inflation is the most common cause of tire failures and may result ...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be foundon either t...

Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pre...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If your vehicleseems to pull to one side when you’re driving, the wheels may be out ofalignment. Have an authorized dealer check the wheel ali...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

5. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. 6. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

replacement or alternate tires or wheels on the vehicle that prevent theTPMS from functioning properly. Always check the TPMS malfunctiontelltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to funct...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When You Believe Your System Is Not Operating Properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

SNOW TIRES AND CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety andperformance of your vehicle, which could result in an increased risk ofloss of vehicle control, ve...

SUMMER TIRES Your Ford vehicle may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud and Snow (M+S or M/S) tire traction rating on the tire sidewall. Since summer tires do not have the same traction performance asAll-season or Snow tir...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. Tires, Wheels and Loading 252 2012 Focus (foc) O...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.The label shall be affixed to either the door hinge pillar,door-latch post, or the door edge that meets the doo...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tireswith a higher limit than the original tires do not increase the GVWRand GAWR limitations. WARNING: Exceeding any vehicle ...

• A final example for your vehicle with 1400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the local home improvement store to finish that patioyou have been planning for the past 2 years. Measuring the inside ofthe vehicle with the rear seat fol...

These guidelines are designed to ensure that your transmission is notdamaged. Before you tow your vehicle, follow these directions for your specificvehicle configuration after it is hooked-up to the RV or tow dolly: Vehicles with a manual transmission: 1. Release the parking brake. 2. Move the gears...

STARTING Positions of the ignition If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. 0 (off) — locks the automatictransmission gearshift lever andallows key removal. This position alsoshuts the engine and all electri...

Starting the engine Note: If your vehicle is equipped with a push button start system, refer to Push button start system in this section for starting. 1. Turn the key to II (on) withoutturning the key to III (start). 2. Turn the key to III (start), thenrelease the key as soon as theengine begins cra...

Ignition modes 1. Off — press and release the START/STOP button without applying thebrake pedal (automatic transmission) or clutch pedal (manualtransmission) when your vehicle is in on mode or when the engine isrunning. Note: In order to switch off the engine while the vehicle is in motion, press an...

Backup method of starting: Your IA key uses a radio frequency signalto communicate with your vehicleand authorize your vehicle to startwhen you press the START/STOPbutton and apply the brake pedal orclutch pedal. If excessive radiofrequency interference is present inthe area, or if the battery in yo...

• Do not use multiple extension cords. Instead, use one extension cordwhich is long enough to reach from the engine block heater cord tothe outlet without stretching. • Make certain that the extension cord is in excellent condition (notpatched or spliced). Store your extension cord indoors attempera...

BRAKES Occasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-outand should be inspected by an authorized dealer. If the vehicle hascontinuous vibration or shudder in the steering wheel while braking, thevehicle ...

Brake assist The brake assist system provides full braking force during panic brakingsituations. It detects a rapid application of the brake pedal and uses theABS system to achieve maximum braking pressure. Once a panic brakeapplication is detected, the system will remain activated as long as thebra...

Certain adverse driving maneuvers may activate the ESC system, whichinclude but are not limited to: • Taking a turn too fast • Maneuvering quickly to avoid an accident, pedestrian or obstacle • Driving over a patch of ice or other slippery surfaces • Changing lanes on a snow-rutted road • Entering a...

WARNING: The EPS has diagnostics checks that continuously monitor the EPS to ensure proper operation of the electronic system. When an electronic error is detected, the message STEERINGASSIST FAULT SERVICE REQUIRED will be displayed in the messagecenter. If this happens, stop the vehicle in a safe p...

Hill start assist system (if equipped) WARNING: HSA does not replace the parking brake. When you leave the vehicle, always apply the parking brake and select P (Park) (automatic transmission) or neutral (manual transmission). WARNING: You must remain in the vehicle once you have activated HSA. WARNI...

Deactivating hill start assist To deactivate hill start assist, perform one of the following: • Apply the parking brake. • Drive off uphill without re-applying the brake. • Wait for two to three seconds until the system deactivatesautomatically. • For automatic transmissions: If hill start assist is...

2. Press the clutch pedal to thefloor, then put the gearshift lever inthe neutral position. 3. Start the engine. 4. Press the brake pedal and movethe gearshift lever to the desiredgear; 1 (First) or R (Reverse). 5. Release the parking brake, then slowly release the clutch pedal whileslowly pressing ...

FORWARD AND REVERSE SENSING SYSTEMS (IF EQUIPPED) The forward and reverse sensing system will warn the driver of obstacleswithin a certain range of the front and rear bumpers. The front sensors will be activewhen the gearshift is in any positionother than P (Park) or N (Neutral)and the vehicle speed...

If the vehicle is equipped with aforward and reverse sensing system,the driver can disable the entiresystem (front and rear sensors) bypressing the parking aid off switchlocated on the lower portion of thecenter console. The message center will indicate afailure in the forward or reversesystem and w...

Active guidelines, fixed guidelines and centerline The active guidelines show the path of intended motion of the vehiclewhile reversing. The fixed guidelines assist a driver with backing into aparking space or aligning with an object behind the vehicle. Thecenterline assists a driver with aligning t...

Active guidelines project the intended path of the vehicle. Fixedguidelines show the actual direction the vehicle is moving. The fixed andactive guidelines will fade in and out depending on the steering wheelposition. When the steering wheel position is straight, the activeguidelines will not be sho...

When manual zoom is enabled, onlythe centerline will be shown. Rear camera delay After shifting out of R (Reverse) and into any gear other than P (Park),the image will remain until the vehicle speed reaches five mph (8 km/h).This will only occur if the rear camera delay feature is on, or until anyra...

WARNING: The rearview camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the rearview mirror and the side mirrors formaximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on t...

Servicing • If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer. • If the image is not clear, check if anything is covering the lens such asdirt, mud, ice, snow, etc. If the image is still not clear after cleaning,have your system inspect...

For best performance, drive the vehicle as parallel as possible whilepassing a parking space. If driven too fast (above 18 mph [30 km/h]) forthe system to measure parking spaces, the information display will showa corresponding message. When the system has found a space, the information display will...

When you determine the vehicle is back far enough, bring the vehicle toa complete stop and move the gearshift to D (Drive). When you determine the vehicle is far enough forward, bring the vehicleto a complete stop and move the gearshift to R (Reverse). Follow theinformation display instructions. The...

Why doesn’t APA position the vehicle where I want in the space? • The driver allows the vehicle to roll in the opposite direction of thetransmission (such as rolling forward when R (Reverse) gear isselected. • You may be driving in R (Reverse). APA can only look for a parkingspace while moving forwa...

BLIND SPOT MIRRORS Blind spot mirrors have an integrated convex spotter mirror built intothe upper outboard corner of the outside mirrors. They are designed toassist the driver by increasing visibility along the side of the vehicle. Formore information on your side view mirrors, refer to Exterior mi...

DRIVING THROUGH WATER If driving through deep or standingwater is unavoidable, proceed veryslowly. Never drive through waterthat is higher than the bottom ofthe wheel rims (for cars) or thebottom of the hubs (for trucks). When driving through water, traction or brake capability may be limited.Also, ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

Vehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s informationportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, cal...

FUEL PUMP SHUT-OFF In the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fuel to theengine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision due to this feature, you mayrestart your vehic...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

Fuse/Relay Number Fuse Amp Rating Protected Components F46 — Not used R1 Power relay Rear 15 relay (2/88) R2 — Not used R3 — Not used R4 — Not used R5 — Not used R6 — Not used Passenger compartment fuse panel The fuse panel is located on the right side below the glove box. The fuses are coded as fol...

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel firmlyand slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when...

The usage of a full-size dissimilar spare tire/wheel can lead toimpairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (...

Removing the spare tire and jack 1. Remove the carpeted wheel cover 2. Remove the wing nut/boltassembly that secures the spare tireand jack by turning itcounterclockwise. 3. Remove the lug wrench and jackfrom the foam holder. Tire Change Procedure WARNING: When one of the front wheels is off the gro...

WHEEL LUG NUT TORQUE SPECIFICATIONS WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Ensure that any fasteners thatattach the roto...

JUMP STARTING WARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. WARNING: Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. Do not attempt to push-start your aut...

Connecting the jumper cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+)...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

Emergency Towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with...

WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, substances on thevehicle’s glass or the wiper blades may be the cause. These may includehot wax treatments used by commercial car washes, water repellen...

• If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or the ring will set. • Do not use household cleaning products or glass cleaners, which canstain and discolor the fabric and affect the flame retardant abilities ofthe seat materials. WARN...

FORD AND LINCOLN CAR CARE PRODUCTS Your Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its finishes. These qualityproducts have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the style andap...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide to find out wh...

Working with the engine on 1. For vehicles equipped with an automatic transmission, set the parkingbrake and shift to P (Park). For vehicles equipped with a manualtransmission, set the parking brake, press and hold the clutch pedal,place the gearshift in N (Neutral), and release the clutch pedal. 2....

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT (Shown without engine cover, if equipped) 1. Engine coolant reservoir 2. Brake/Clutch fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Engine oil filler cap 7. Engine oil dipstick 8. Windshield washer fluid reservoir 1 2 ...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

1. Turn the ignition off beforeremoving the wiper blade. 2. Pull the wiper blade and armaway from the glass. 3. Squeeze the locking tabs torelease the blade from the arm andpull the blade away from the arm toremove it. 4. Attach the new blade to the arm and snap it into place. Lower thewiper arm and...

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is heard. If you find this procedure too difficult, please see your dealer. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance informatio...

• Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the engine is overfilled, some oil must beremoved from the engine by anauthorized dealer. 7. Put the dipstick back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions,...

economy requirements of the International Lubricant Standardization andApproval Committee (ILSAC), comprised of U.S. and Japaneseautomobile manufacturers. To protect your engine and engine’s warranty, use Motorcraft 威 SAE 5W-20 or an equivalent SAE 5W-20 oil meeting Ford specificationWSS-M2C945-A. S...

BATTERY Your vehicle is equipped with aMotorcraft 威 maintenance-free battery which normally does notrequire additional water during itslife of service. If your battery has a cover/shield, make sure it is reinstalledafter the battery has been cleaned or replaced. For longer, trouble-free operation, k...

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recycling centerto find out more about recyclingautomotive batteries. ENGINE COOLANT Checking engine coolant The concentration and level of engine coolant sho...

When the engine is cold, check thelevel of the engine coolant in thereservoir. • The engine coolant should be at the FULL COLD level, or within theCOLD FILL or MIN / MAX range as listed on the engine coolantreservoir (depending upon application). • Refer to scheduled maintenance information for serv...

• DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used. Mixing of engine coolants mayharm your engine’s cooling system. The use of an improper coolantmay harm engine and cooling system components and may void thewarranty. Refer to Maintenance product...

3. Step back while the pressure releases. 4. When you are sure that all the pressure has been released, use thecloth to turn it counterclockwise and remove the cap. 5. Fill the coolant reservoir slowly with the proper coolant mixture, towithin the FULL COLD level, or within the COLD FILL or MIN / MA...

Severe climates If you drive in extremely cold climates: • It may be necessary to increase the coolant concentrationabove 50%. • NEVER increase the coolant concentration above 60%. • A coolant concentration of 60% will provide improved freezepoint protection. Increased engine coolant concentrations ...

Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materialsand any open flames beforefueling your vehicle. • Always turn off the vehicle beforefueling. • Automotive fuels can be harmful orfatal if swallowed. Fuels such as gasoline and ethanol are highly toxic a...

During the summer season, fuel ethanol may contain a maximum of 85%denatured ethanol (Ed85) and 15% unleaded gasoline. The fuel ethanolhas a higher octane rating than unleaded regular or premium gasolineand this allows the design of engines with greater efficiency and power. Winter blends may contai...

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in the vehicle (including thecargo area). • Keep the fuel pump nozzle in contact with the fuel conta...

immediately. It may take several driving cycles for the check fuel fill inletlamp or CHECK FUEL FILL INLET message to turn off. A driving cycleconsists of an engine start-up (after four or more hours with the engineoff) followed by city/highway driving. Continuing to drive with the checkfuel fill in...

Do not be concerned if your engine sometimes knocks lightly. However, ifit knocks heavily under most driving conditions while you are using fuelwith the recommended octane rating, see your authorized dealer toprevent any engine damage. FFV engine (if equipped) If your vehicle is flex fuel capable, i...

performance and emission control system protection for your vehicle.Gasolines that meet the World-Wide Fuel Charter should be used whenavailable. Ask your fuel supplier about gasolines that meet theWorld-Wide Fuel Charter. Cleaner air Ford endorses the use of reformulated “cleaner-burning” gasolines...

When filling the vehicle’s fuel tank from a portable fuel container, use thefunnel included with the vehicle. 1. After lifting the carpeted wheelcover, locate the white plastic funnelnext to the spare tire. It can befound in either location as shown inthe graphic. 2. Slowly insert the funnel into th...

Filling the tank The advertised fuel capacity of the fuel tank on your vehicle is equal tothe rated refill capacity of the fuel tank as listed in the Maintenance product specifications and capacities section of this chapter. The advertised capacity is the amount of the indicated capacity and theempt...

Keep a record for at least one month and record the type of driving (cityor highway). This will provide an accurate estimate of the vehicle’s fueleconomy under current driving conditions. Additionally, keeping recordsduring summer and winter will show how temperature impacts fueleconomy. In general,...

• Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in scheduled maintenance information. Conditions • Heavily loading a vehicle or towing a trailer may reduce fuel economyat any speed. • Carrying unnecessary weight may re...

Changing the air filter element 1. Loosen the screws that securethe air filter housing cover. 2. Carefully separate the two halvesof the air filter housing. 3. Remove the air filter elementfrom the air filter housing. 4. Wipe the air filter housing andcover clean to remove any dirt ordebris and to e...

MOTORCRAFT PART NUMBERS Component 2.0L GDI engine Air filter element FA-1908 1 Oil filter FL-910- S 2 Battery BXT-96R-500/BXT-96R-590 Spark plugs 3 Cabin air filter FP70 Windshield wiper blade WW-2802 (driver side)WW-2803 (passenger side) 1 Failure to use the correct air filter element may result in...

The Vehicle Identification Number (VIN) contains the followinginformation: 1. World manufacturer identifier 2. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location 3. Make, vehicle line, series, bodytype 4. Engine type 5. Check digit 6. Model year 7. Assembly plant ...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following this schedule helps protect against major repairexpenses resulting from neglect or inadequate maintenance and may alsohelp to increase the value of your vehicle when you sell or trade it. It is your responsibility to see ...

Ford Motor Company has recommended maintenance intervals forvarious parts and component systems based upon engineering testing.Ford Motor Company relies upon this testing to determine the mostappropriate mileage for replacement of oils and fluids to protect yourvehicle at the lowest overall cost to ...

Factory-trained Technicians Service technicians participate in extensive factory-sponsoredcertification training to help them become experts on the operation ofyour vehicle. Ask your dealership about the training and certificationtheir technicians have received. Genuine Ford and Motorcraft 姞 Replace...

NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil Life Monitor 姞 Your vehicle is equipped with an Intelligent Oil Life Monitor 威 that determines when the engine oil should be changed based on how yourvehicle is used. By using several important factors in its calculations, themonitor helps reduce ...

Normal Scheduled Maintenance At every oil changeinterval as indicatedby the messagecenter Change engine oil and filter Rotate tires, inspect tire wear and measure treaddepth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (ifequipped with dipstick); consult de...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Operating in dusty conditions such as unpaved or dusty roads Inspect frequently,service as required Replace cabin air filter (if equipped) Replace engine air filter Every 5,000 miles(8,000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag Rotate tires, inspect ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Edge/MKX AWD only – vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent o...

911 Assist™ ................................83 A Accessing call history/phonebook during active call ...............67 Accessing your media menufeatures ........................................92 Accessing your phone menufeatures ........................................70 Accessory delay ..............

E Electronic message center ...18, 22 Emergencies, roadside jump-starting ..........................317running out of fuel .................358 Emission control system ..........362 End user license agreement ....105 Engine ........................................374 cleaning ..........................

Mirrors ...............................139–140 automatic dimming rearviewmirror ......................................139fold away .................................141heated ......................................140side view mirrors (power) .....140signal .......................................140 M...

Towing .......................................256 recreational towing .................256trailer towing ..........................256wrecker ....................................320 Traffic, Directions andInformation ..................................80Transmission automatic operation .................