Ford 2012 Focus v.4- User Manual

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner’s Guide. Special instructions For your added safety, your vehicl...

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safeoperation of your vehicle.We recommend aga...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Instrument cluster with standard measure shown; metric similar Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.M...

Solid illumination after the engine is started indicates the on-boarddiagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic co...

Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected. Contact yourauthorized dealer as soon aspossible. Normal braking is still functional unless the brake warning lightalso is illuminated. Airbag readiness: If this light fails to illuminate...

AdvanceTrac 威 off light: Illuminates whenAdvanceTrac 威 /Traction control has been disabled by the driver. Refer tothe Driving chapter for more information. Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure shou...

GAUGES Base cluster shown in standard measure; uplevel cluster andmetric similar. 1. Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scalemay damage the engine. 2. Multifunction display: This is used to configure d...

Odometer : The odometer is displayed in the cluster and registers the total accumulated distance the vehicle has traveled. Trip odometer: Registers the distance of individual journeys. • Standard instrument cluster: Press the reset stem once to switch from the odometer to trip odometer . To reset th...

Trip 1 and 2 Trip odometer — shows the accumulated trip distance. Displayed inthe middle line and is denoted by a 1 or 2 next to the highway symbol. Trip timer — shows the elapsed trip time. This timer will stop whenthe vehicle is turned off and will restart when the vehicle is restarted. ToE (dista...

Use the left steering wheel controlsto navigate through the messagecenter. Press the up/down arrow buttons tomove up/down through the messagecenter choices. Press the left/right arrow buttons tomove left/right through the messagecenter choices. Press the OK button to selecthighlighted options and co...

Settings Convenience Compass(non–navigationsystems only) Show On or Off Set Zone (1–15)See the diagrambelow todetermine yourmagnetic zone. Calibrate Hold OK toCalibrate Remote Start Climate Control Heater – A/C /Auto or LastSetting Front Defrost /Auto or Off Rear Defrost /Auto or Off (5, 10 or15 min...

Settings (cont’d) MyKey Create MyKey Hold OK to Create MyKey Traction Ctrl Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Warning 45 mph (75 km/h), 55 mph(90 km/h), 65 mph (105 km/h) orOff Volume Limiter On or Off Clear MyKeys Hold OK to Clear All MyKeys System Reset Hold OK t...

Tire pressure Monitoring System (TPMS) Message Action / Description Tire Pressure Sensor Fault Amber Displays when a tire pressuresensor is malfunctioning, oryour spare tire is in use. Formore information on how thesystem operates under theseconditions, refer to Understanding Your TirePressure Monit...

AUDIO SYSTEMS AM/FM/CD/MP3 system (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility ...

• Audio Menu: Scroll to select Audio and then move right to enter the menu. Scroll to select from: • SCV level (if equipped): Scroll to select Speed compensated volume and move right to enter the menu. This featureautomatically adjusts the volume to compensate for speed andwind noise. You can set th...

5. Memory presets: To save a station, tune to the desired station. Press and hold a preset button until the information pop-up timer expires andstored preset # pop-up appears. 6. On/Off/Volume: Press to turn the system on or off. Turn to adjust the volume. 7. PHONE: Press to access SYNC 威 phone feat...

14–17. Soft keys: Press to choose the corresponding selection (ifavailable) in the display. AM/FM/CD/MP3 SYNC 姞 compatible system (if equipped) XXX XXX XXX XXX 17 16 15 14 Entertainment Systems 44 2012 Focus (foc) Owners Guide, 4th PrintingUSA (fus)

14–17. Soft keys: Press to choose the corresponding selection (ifavailable) in the display. MyFord Touch™ WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take theirf...

Auxiliary input jack (Line in, if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is t...

Media hub (if equipped) If your vehicle is equipped with theMyFord Touch™ touchscreensystem, your media hub is located inyour center console and will containthe following: 1. USB ports 2. SD card slot 3. AV inputs For more information on these components, please refer to the Mediachapter of your MyF...

CDs with homemade paper(adhesive) labels should not beinserted into the CD player asthe label may peel and cause theCD to become jammed. It isrecommended that homemadeCDs be identified withpermanent felt tip marker ratherthan adhesive labels. Ballpoint pens may damage CDs. Pleasecontact your authori...

SYNC 姞 (IF EQUIPPED) Note: The following SYNC 威 information is to be used in conjunction with the vehicle’s compatible audio systems listed on the previous pages. Thissection is NOT to be used in conjunction with the touchscreen system(MyFord Touch™). If you have the MyFord Touch™ system, please ref...

Welcome to technology that is both fun and functional, welcome toSYNC 威 . Added benefits SYNC 威 even has some benefits which extend beyond your car. You can: • Access on-line support • Chat with other SYNC 威 owners • Search for and download new applications • Check frequently asked questions (FAQs) ...

• “Vehicle Health Report” (if equipped, U.S. only): Say to run a health report. • “ Services” (if equipped, U.S. only): Say to access the SYNC Services portal. System interaction and feedback The system provides feedback through audible tones, prompts, questionsand spoken confirmations depending on ...

For example, “Say 1 after the tone to call John Doe at home. Say 2after the tone to call Johnny Doe on mobile. Say 3 after the toneto call Jane Doe at home.” Or, “Say 1 after the tone to play JohnDoe, Say 2 after the tone to play Johnny Doe. Helpful Hints • Ensure that the interior of the vehicle is...

Pairing a phone for the first time The first thing you must do to use a phone with the system is towirelessly pair your phone with SYNC. Doing so allows your phone tocommunicate with the hands-free system, thereby enabling you to makeand receive hands-free calls. Note: To scroll through the menus, p...

3. Press OK and scroll until Bluetooth Devices is selected and pressOK. 4. Scroll until Add Bluetooth Device is selected and press OK. 5. When Find SYNC appears in the display, press OK. 6. Put your phone into Bluetooth discovery mode. Refer to your phone’s user guide if necessary. 7. When prompted ...

Phone book commands: When you ask SYNC 威 to access a phone book name, number, etc., the requested information will appear in the displayto view. Press or PHONE or say “Call” to call the contact. * If you have said, “Dial” you can say any of the followingcommands: • <number> 0–9 • Dial • Delete...

Making a call To make a call, pull and when prompted say: • “Call <name>” or • “Dial” and the desired number. When the system confirms the number, say “Dial” again to initiate the call. Note: To erase the last spoken digit, say “Delete” or press . To erase all spoken digits, say “Clear” or pre...

Maneuvering the phone menu Below is a graphical representation of how the phone menu lays out inyour system. It will be explained in more detail in this chapter, but thismay help you to better visualize the menu structure. + Denotes submenus with additional menu items Scrolling through the menus: Us...

Accessing features through the phone menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as accessingphone and system settings. You can also access advanced features suchas 911 Assist™, Vehicle Health Report and SYNC Services. T...

Text Message : This is a phone dependent feature which enables you to send, download and delete text messages. • Please refer to Text Messaging in the following section for complete information. Phone Settings : These are phone dependent features which allow you to view your phone’s status, set a ri...

Receiving a text message Note: This is a phone dependent feature. Your phone must support downloading text messages via Bluetooth to receive incoming text messages. When a new message arrives: 1. An audible tone will sound and the display will indicate you have anew message. 2. Pull , wait for the p...

2. Scroll to cycle through the following predefined text messageoptions: • Can’t talk right now • Call me • Call you later • Yes • Be there in 20 minutes • Why? • No • Where R you? • Thanks • I love you • I need more directions • Can’t wait to see you • Too funny • Be there in 10 minutes • I’m stuck...

Modify Phonebook : Allows you to modify the contents of your phone book (i.e. add, delete, download). Press OK to select and scroll to cycle through the followingoptions: • Add Contacts: Press OK to add more contacts from your phone book. ’Push’ the desired contact(s) on your phone. Refer to yourpho...

Bluetooth Device menu options This menu allows you to add, connect, delete, set a phone as primary, aswell as turn Bluetooth on and off. To access: 1. Press PHONE or to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3. Scroll until Bluetooth Devices appears and select OK...

Set As Primary Phone? : Select to set a previously paired phone as your primary phone. SYNC will attempt to connect with the primaryphone at every ignition cycle. • Press OK to select and scroll to select the desired phone. Press OK to confirm. Note: When a phone is selected as primary, it will appe...

Accessing and using your SYNC applications and Services(if equipped) In addition to the standard phone and media options which SYNC offers,your system also includes advanced features such as: • 911 Assist™: Can alert 911 in the event of an emergency. • Vehicle Health Report (if equipped, U.S. only):...

4. To return to the services main menu, say “Services” or for help, simplysay, “Help”. To connect to SYNC 威 Traffic, Directions & Information Services using the phone menu: 1. Press or PHONE to enter the Phone Menu. 2. Scroll repeatedly until Services appears in the display. 3. Press OK to confi...

Push to interrupt: You can, at any time while you are connected to SYNC TDI Services, pull to interrupt a voice prompt or an audio clip (such as a sports report) and say your voice command. Portable: Your SYNC TDI Services subscription is associated with your Bluetooth enabled cellular phone number,...

911 Assist™ (if equipped) For 911 Assist™ to function properly, the vehicle must havebattery power after the crash, the cell phone must be previouslypaired, connected to SYNC 威 , and continue to function properly with the ability to make and maintain a 911 call initiated bySYNC 威 , and the 911 Assis...

Note: Your Vehicle Health Report feature requires activationprior to use. Visit www.SyncMyRide.com to register. There is no fee or subscription associated with Vehicle Health Report, but you must register to use this feature. SYNC 威 allows you to check your vehicle’s overall ‘health’ in the form of ...

• Automatic Reports: Press OK and select on or off. Select ’On’ to have SYNC automatically prompt you to run a healthreport at certain mileage intervals. Note: You must first turn this feature ’on’ before you can select the mileage intervals atwhich you would like to be prompted. • Mileage Intervals...

Compatibility SYNC is capable of hosting nearly any digital media player including:iPod 威 , Zune™, “Plays from device” players, and most USB drives. SYNC will also support audio formats such as MP3, WMA, WAV and ACC. Connecting your digital media player to SYNC 姞 via the USB port Note: If your digit...

What’s playing? At any time while a track is playing, you can pull and say, “What’s playing?”. SYNC will read the metadata tags of the playing track to you(if populated). Media voice commands Pull and when prompted, say, “USB” . You may then say any of the following: • Play all • Play • Pause • What...

Maneuvering the media menu Below is a graphical representation of how the phone menu lays out inyour system. It will be explained in more detail in this chapter, but thismay help you to better visualize the menu structure. + Denotes submenus with additional menu items Scrolling through the menus: Pr...

Accessing the features of your media menu SYNC’s media menu allows you to select which source you would like tolisten to, how you would like to play your music (by artist, genre, shuffle,repeat, etc.), and also if you need to add, connect or delete devices. To access your media menu: 1. Press AUX an...

Artists : Allows you to sort all indexed media by artist. Once selected, the system will list and then play all artists and tracks alphabetically. Ifthere are less than 255 indexed artist, they will be listed alphabetically inflat file mode. If there are more, they will be categorized intoalphabetic...

See the following sections for more information on these menus as wellas the following graphic for the menu layout. Scrolling through the menus: Press / to scroll through the menu options. Bluetooth Device menu options This menu allows you to add, connect and delete devices as well as turn Bluetooth...

USB/Media issues Issue Possible Cause(s) Possible Solution(s) SYNC doesn’trecognize musicthat is on mydevice. • Your music files may not containthe proper artist,song title, albumor genreinformation.The file may becorrupted.The song mayhave copyrightprotection whichdoes not allow itto play. • Ensure...

Vehicle Health Report/Services (Traffic, Directions and Information) issues Issue Possible Cause(s) Possible Solution(s) I heard acommercial whenI tried to useTraffic, Directionsand Information. • The phone in use is notactivated. • Your phone has ID blocker active. • This is a free feature, but you...

services of third party origin, as well as associated media, printedmaterials, and “online” or electronic documentation (“THRID PARTYSOFTWARE”) are protected by international intellectual property lawsand treaties. The THIRD PARTY SOFTWARE is licensed, not sold. Allrights reserved. • The MS SOFTWARE...

• Single EULA: The end user documentation for the DEVICE and related systems and services may contain multiple EULAs, such asmultiple translations and/or multiple media versions (e.g., in the userdocumentation and in the software). Even if you receive multipleEULAs, you are licensed to use only one ...

• Internet-Based Services Components: The SOFTWARE may contain components that enable and facilitate the use of certainInternet-based services. You acknowledge and agree that MS, MicrosoftCorporation, FORD MOTOR COMPANY, third party software andservice suppliers, their affiliates and/or their design...

PRODUCT SUPPORT: Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or theiraffiliates or subsidiaries. For product support, please refer to FORDMOTOR COMPANY instructions provided in the documentation for theDEVICE. Should you have any questions co...

WARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not changesystem settings or enter data non-verbally (using your hands) whiledriving. Stop the vehicle in a safe and legal ma...

Bluetooth enabled cellular phone: Any cellular phone which has the Bluetooth wireless technology which will enable the phone to connect with SYNC 威 and exchange information wirelessly. Digital media player / USB Device: This is a generic term used to signify any of the following media devices: iPod ...

SINGLE ZONE MANUAL SYSTEM (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to the Message Center section of the Instrument Cluster chapter. 1. (Fan speed adjustment): Turn to select the desired fan speed. 2. (Recirculated air): Press to activate/deactivate air re...

5. Multifunction control: Turn to manually choose one of the following air distribution modes: • (Panel): Distributes air through the instrument panel vents. • (Floor and Panel): Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents. • (Floor): Dis...

and put the vehicle’s transmission into the P (Park) gear position(automatic transmission only) to continue to receive cool air from yourA/C system. For maximum cooling performance in MAX A/C mode: 1. Select MAX A/C. 2. Set the airflow to the (Panel). 3. Set the fan to the highest speed initially. A...

Driver setting: Turn this knob to increase/decrease the temperature for the entire vehicle cabin (single zone). When the system is in single zone,MONO will appear in the display. If the passenger side control (3) isactivated, then dual zone will be active, and this control will only adjusttemperatur...

To aid in side window defogging/demisting in cold weather: 1. Select . 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan to the highest speed. 5. Direct the outer instrument panel vents toward the side windows. To increase airflow to the outer instrument panel vent...

CABIN AIR FILTER Your cabin air filter is located in the passenger foot well area. The cabinair filter element is designed to reduce the concentration of airborneparticles such as dust, spores and pollen in the air being supplied to theinterior of the vehicle. The presence of a particulate filter el...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Note: The head lamp indicator will illuminate when the head lamps are activated. Autolamp control (if equipped) The autolamp system provides lightsensi...

Fog lamp control (if equipped) The fog lamps can be turned onwhen the headlamp control is in the , , or positions and the high beams are not turnedon. • Press the fog lamp control,located on the instrument panel,to activate the fog lamps. • Press the fog lamp control againto deactivate the fog lamps...

WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps under these conditions may result i...

• Tap the left control to dim allinterior lit componentsincrementally, or • Press and hold the left controluntil the desired lighting level isreached. Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to themaximum setting...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

Ambient lighting (if equipped) Illuminates the interior with achoice of several colors. Theambient lighting control switch islocated in the overhead console. • Rotate the control knob past thefirst detent to activate and adjustto the desired brightness. • Press the left color pallet switchto cycle t...

Replacing exterior bulbs Check the operation of all the bulbs frequently. Replacing headlamp bulbs 1. Make sure the headlamp controlis in the off position and open thehood. 2. Remove the two screw from theheadlamp assembly. 3. Carefully pull the headlampassembly up and away from thevehicle. Low beam...

WINDSHIELD WIPERS Move the lever down for a singlewipe. Move the control up one position for intermittent operation.Adjust the rotary control to thedesired speed. Move the control up two positionsfor low-speed wiping or three positions for high-speed wiping. The wipers may be moved manually with the...

Courtesy wipe feature One extra wipe will happen a few seconds after washing the frontwindow to clear any water that is dripping down from the top of thewindshield caused by the washing. Note: Do not operate the washer when the washer reservoir is empty. This may cause the washer pump to overheat. C...

outlet and blow the fuse. Do not hang any type of accessory oraccessory bracket from the plug. Improper use of the poweroutlet can cause damage not covered by your warranty. The auxiliary power points can be found in the following locations: • On the center console • On the rear of the center consol...

Press and pull the window switchesto open and close windows. • Press down (to the first detent)and hold the switch to open. • Pull up (to the first detent) andhold the switch to close. Rear Window Buffeting: When one or both of the rear windows are open, the vehicle may demonstrate a wind throb or b...

2. Close the window a third time to the resistance. The bounce-backfunction is disabled and you can close the window manually. The windowwill override the resistance and you can close it fully. 3. If the window does not close after the third attempt, contact yourauthorized dealer as soon as possible...

INTERIOR MIRROR The interior rearview mirror has two pivot points on the support armwhich lets you adjust the mirror up or down and from side to side. WARNING: Do not adjust the mirror while the vehicle is in motion. Automatic dimming interior rear view mirror (if equipped) The interior rear view mi...

Heated outside mirrors (if equipped) Both mirrors are heatedautomatically to remove ice, mistand fog when the rear windowdefrost is activated. Do not remove ice from themirrors with a scraper orattempt to readjust the mirrorglass if it is frozen in place.These actions could cause damage to the glass...

Using speed control The speed controls are located on the steering wheel. The followingbuttons work with speed control: CAN (cancel)/RES (resume): Pull toward you to cancel or resume aset speed. SET+: Press to set a speed or increase a set speed. ON/OFF: Press to turn speed control on or off. SET–: ...

HOMELINK 姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the...

2. Return to your car. 3. Press and hold the functionbutton for 2 seconds, then release.Repeat this step. Depending on thebrand of garage door opener youmay do repeat this sequence a thirdtime. To program additional buttonsrepeat steps one through four. For questions or comments, please contact Home...

Operating the HomeLink 姞 Wireless Control System To operate, simply press and releasethe appropriate HomeLink 威 button. Activation will now occur for thetrained product (garage door, gateoperator, security system, entrydoor lock, or home or office lightingetc.). For convenience, thehand-held transmi...

POSITIVE RETENTION FLOOR MAT WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the...

WARNING (Continued) • Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is over the retention post and press down t...

KEYS Integrated keyhead transmitters (IKTs) (if equipped) Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade is used tostart the vehicle and unlock/lock thedriver’s door from outside thevehicle. The transmitter portionfunctions as the remote entrytransmitter. Y...

Intelligent Access Key (IA key) (if equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote entry system. You have tohave the IA key in the vehicle toactivate the push button startsystem. The IA key also contains aremovable mechanical key bla...

admin keys are programmed to the vehicle, and see the total distancethe vehicle has been driven with the MyKey 威 active. MyKey 威 restricted features Standard settings – these settings cannot be changed • Belt-Minder 威 cannot be cleared and will not expire. The audio system will be muted whenever Bel...

Refer to Message center in the Instrument Cluster chapter for vehicle information displays. Using MyKey 威 with remote start systems MyKey 威 is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer for a...

POWER DOOR LOCKS The power door lock control islocated on the instrument panelnear the radio. Press the control to lock/unlock thedoors. When the light on the buttonis on it indicates that all doors andthe luggage compartment arelocked. When the light is off itindicates one or more doors are unlocke...

If a door is unlocked, the autolock feature will repeat when the vehicleslows below 4 mph (7 km/h) and then attains a speed greater than4 mph (7 km/h). Autounlock Feature When autounlock is activated, all doors will unlock when the driver dooris opened. Deactivating/Activating Autolock/Autounlock Th...

REMOTE ENTRY SYSTEM (IF EQUIPPED) FCC ID: LXP-RX4318 IC: 2298A-RX4318 The integrated keyhead transmitters (IKTs) and intelligent access keys(IA key) comply with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device may not c...

handle, the luggage compartment handle, or a button on the transmitteritself). If excessive RF interference is present in the area, or if yourvehicle battery is low, it may be necessary to mechanically unlock yourdoor. The mechanical key blade in your IA key can be used to open thedriver’s door in t...

(disabling two stage unlock allows all vehicle doors to unlocksimultaneously). The turn signal lamps will illuminate twice to indicatethat two-stage unlock was enabled or disabled. The unlocking mode willbe applied to remote entry, keyless entry and intelligent access (ifequipped). Two-stage unlocki...

3. Twist a flat object in the positionshown to separate the two halves ofthe transmitter. 4. Carefully insert a flat object inthe position show to open thetransmitter. 5. Carefully pry out the battery with a flat object. Note: Please refer to local regulations when disposing of transmitter batteries...

SECURILOCK 姞 PASSIVE ANTI-THEFT SYSTEM SecuriLock 威 passive anti-theft system is an engine immobilization system. This system is designed to help prevent the engine from beingstarted unless a coded integrated keyhead transmitter (IKT) or intelligent access keys programmed to your vehicle is used. Th...

Automatic arming The vehicle is armed immediately after turning the ignition off. Automatic disarming Switching the ignition on with a coded key disarms the vehicle. Replacement of integrated keyhead transmitters (IKT) or intelligentaccess keys Note: Your vehicle comes equipped with two integrated k...

Programming spare intelligent access keys (if equipped) If you have integrated keyhead transmitters (IKT) or standardSecuriLock 威 coded keys, refer to Programming spare integrated keyhead transmitter (IKT) keys in this section. If you would like to have additional intelligent access keys programmedt...

WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Adjusting the front manual seats WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back recline...

• Up-down seat adjustment (driver’s side only) Pull up on the control to raise theseat and push down on the controlto lower the seat. • Recline adjustment Lift the control to adjust the angleof the seatback. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt,...

Adjusting the front power seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing s...

To operate the heated seats, turn the thumbwheel to the desired heatsetting 0–5: • Setting 0 is off, 1 is the lowestheat setting and setting 5 is thehighest. REAR SEATS Second row head restraints Outboard seat positions Your vehicle is equipped with removable outboard head restraints. WARNING: To mi...

Center seat position Your vehicle is equipped with a second row center head restraint that isvertically adjustable and removable. The adjustable center head restraintconsists of: • a trimmed energy absorbing foamand structure (1), • two steel stems (2), • a guide sleeve adjust/releasebutton (3), • a...

WARNING: Air bags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, movethe seat all the way back. WARNING: Always transport children 12 years old and under in a rear seating ...

response to the occupant’s forward momentum. This helps reduce therisk of force-related injuries to the occupant’s chest by limiting the loadon the occupant. Determining if the Personal Safety System is operational The Personal Safety System uses a warning light in the instrumentcluster, a warning m...

WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding...

Safety belt locking modes All safety restraints in the vehicle are combination lap and shoulderbelts. The driver safety belt has the first locking mode and the frontoutboard passenger and rear seat safety belts have both types of lockingmodes described as follows: Vehicle sensitive mode This is the ...

Safety belt height adjustment Adjust the height of the shoulderbelt so the belt rests across themiddle of your shoulder. To adjust the shoulder belt height,squeeze the button and slide theheight adjuster up or down. Releasethe button and pull down on theheight adjuster to make sure it islocked in pl...

If... Then... The driver’s or frontpassenger’s safety belt becomesunbuckled for approximatelyone minute while the vehicle istraveling at least 6 mph(9.7 km/h) and more than1-2 minutes have elapsed sincethe ignition switch has beenturned to on... The Belt-Minder 威 feature is activated - the safety be...

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The supplemental restraint system is designed to work with the safetybelt to help protect the driver and right front passenger from certainupper body injuries. WARNING: Airbags DO NOT inflate slowly or gently, and the risk of injury from a deploying airbag ...

Children and airbags Children must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rearseating positions than in the frontseating position. Failure to followthese instructions may increase therisk of injury in a collision. WARNING: Airb...

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion pr...

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit. If the airbag readiness lamp is lit, do the following: The driver and/or adult passengers should check for any objects thatmay be lodged underneath the front passenger ...

How does the side airbag system work? The design and development of the side airbag system includedrecommended testing procedures that were developed by a group ofautomotive safety experts known as the Side Airbag Technical WorkingGroup. These recommended testing procedures help reduce the risk ofin...

restrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openings. The side air curtains are mounted to the sheet metal above the first andsecond row seats. In certain lateral collisions, the air cur...

Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required. A difficulty with the syst...

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make ...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infantsortoddlers Children weighing 40 lb (18 kg) or less(generally age four or younger) Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddlerseat). Smallch...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child’s size,height, weight, or age. Follow the child restraint manufacturer’sinstructions and warnings provided for install...

training to ensure that all children ages 0 to 16 are properly restrained inthe correct restraint system. Ford recommends checking with a NHTSACertified Child Passenger Safety Technician (CPST) and yourpediatrician to make sure your seat is appropriate for your child andproperly installed in the veh...

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear a snap and feel the latchengage. Make sure the tongue islatched securely by pulling on it. 5. To put the retractor in theautomatic locking mode, grasp...

Use of inboard lower anchors from the outboard seating positions(center seating use) The lower anchors at the center of the second row rear seat are spaced18 inches (450 mm) apart. The standardized spacing for LATCH loweranchors is 11 inches (280 mm) center to center. A child seat with rigidLATCH at...

Child booster seats The belt-positioning booster (booster seat) is used to improve the fit ofthe vehicle safety belt. Children outgrow a typical child seat (e.g.,convertible or toddler seat) when they weigh about 40 lb (18 kg) and arearound four (4) years of age. Consult your child safety seat owner...

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, and lets you adjust the shoulder belt to cross the chest andrest snugly near the center of the shoulder. The drawings below comparethe ideal fit (cente...

Move a child to a different seating location if the shoulder belt does notstay positioned on the shoulder during use. Follow all instructions provided by the manufacturer of the booster seat. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back be...

IMPORTANT INFORMATION FOR 235/40R18 LOW-PROFILE TIRESAND WHEELS If your vehicle is equipped with 235/40R18 tires, they are low-profiletires. These tires and wheels are designed to give your vehicle a sportappearance. With low-profile tires, you may notice an increase in roadnoise and faster tire wea...

graded 100. The relative performance of tires depends upon the actualconditions of their use, however, and may depart significantly from thenorm due to variations in driving habits, service practices, anddifferences in road characteristics and climate. Traction AA A B C WARNING: The traction grade a...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

have the tire inspected by a tire professional. Tires can be damagedduring off-road use, so inspection after off-road use is alsorecommended. WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed,inflation pressure, etc...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed t...

you cannot detect a cause, have the vehicle towed to the nearest repairfacility or tire dealer to have the vehicle inspected. Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle s...

6. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner’s guide. If not, contact a local tire dealer. Note: You may not find this information on all tires because it is not required by federal law. 7. H: Indi...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that may cause undesired operation. WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The ...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When you believe your system is not operating properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

SNOW TIRES AND CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety andperformance of your vehicle, which could result in an increased risk ofloss of vehicle control, ve...

SUMMER TIRES Your Ford vehicle may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud and Snow (M+S or M/S) tire traction rating on the tire sidewall. Since summer tires do not have the same traction performance asAll-season or Snow tir...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. Tires, Wheels and Loading 251 2012 Focus (foc) O...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.The label shall be affixed to either the door hinge pillar,door-latch post, or the door edge that meets the doo...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tireswith a higher limit than the original tires do not increase the GVWRand GAWR limitations. WARNING: Exceeding any vehicle ...

you have been planning for the past 2 years. Measuring the inside ofthe vehicle with the rear seat folded down, you have room for12-100 lb. (45 kg) bags of cement. Do you have enough load capacityto transport the cement to your home? If you and your friend eachweigh 220 lb. (99 kg), the calculation ...

Before you tow your vehicle, follow these directions for your specificvehicle configuration after it is hooked-up to the RV or tow dolly: Vehicles with a manual transmission: 1. Release the parking brake. 2. Move the gearshift to the neutral position. 3. The maximum towing speed is 70 mph (113 km/h)...

STARTING Positions of the ignition If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. 0 (off) — locks the automatictransmission gearshift lever andallows key removal. This positionalso shuts the engine and allelectric...

Starting the engine Note: If your vehicle is equipped with a push button start system, refer to Push button start system in this section for starting. 1. Turn the key to II (on) withoutturning the key to III (start). 2. Turn the key to III (start), thenrelease the key as soon as theengine begins cra...

Ignition modes 1. Off — press and release the START/STOP button without applying thebrake pedal (automatic transmission) or clutch pedal (manualtransmission) when your vehicle is in on mode or when the engine isrunning. Note: In order to switch off the engine while the vehicle is in motion, press an...

Backup method of starting: Your IA key uses a radio frequency signalto communicate with your vehicleand authorize your vehicle to startwhen you press the START/STOPbutton and apply the brake pedal orclutch pedal. If excessive radiofrequency interference is present inthe area, or if the battery in yo...

longer present. This message is a reminder that someone else in thevehicle may have taken the IA key when exiting the vehicle. If the IA keyis no longer present in the vehicle, you will not be able to re-start yourvehicle outside of the Fast Restart time (see Fast Restart Feature above). It is impor...

Prior to using the engine block heater, follow these recommendations forproper and safe operation: • For your safety, use an outdoor extension cord that is productcertified by Underwriter’s Laboratory (UL) or Canadian StandardsAssociation (CSA). Use only an extension cord that can be usedoutdoors, i...

How to use the engine block heater Ensure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth. Depending on the type of factory installed equipment, your engine blockheater will use .4 to 1.0 kilowatt-hours of energy per hour of use. Yourfactory installed block hea...

Brake over accelerator This vehicle is equipped with a brake over accelerator feature. In theevent the accelerator pedal becomes stuck or entrapped, applying steadyand firm pressure to the brake pedal will both slow the vehicle andreduce engine power. If you experience this condition, apply the brak...

Electronic stability control (ESC) Electronic stability control (ESC) may enhance your vehicle’s directionalstability during adverse maneuvers, for example when cornering severelyor avoiding objects in the roadway. ESC operates by applying brakes toone or more of the wheels individually and, if nece...

your steering system. If this should occur, you will neither lose the abilityto steer the vehicle manually nor will it cause permanent damage.Typical steering and driving maneuvers will allow the system to cool andsteering assist will return to normal. The EPS system has diagnostic checks that conti...

L (Low) This position: • Provides maximum engine braking. • Will downshift to the lowest available gear for the current vehiclespeed; allows for first gear when vehicle reaches slower speeds. • Is not intended for use under extended or normal driving conditionsand results in lower fuel economy. Unde...

The SST will automatically upshift if the engine reaches maximum RPMand the driver has not selected the proper gear for vehicle speed to helpprevent engine damage caused by excessive over-revving. Engine damage may occur if excessive engine revving is heldwithout shifting. Hill start assist system (...

3. When you remove your foot from the brake pedal, the vehicle willremain on the slope without rolling away for approximately two to threeseconds. This hold time will automatically be extended if you are in theprocess of driving off. 4. Drive off in the normal manner. The brakes will be releasedauto...

MANUAL TRANSMISSION OPERATION (IF EQUIPPED) Using the clutch Manual transmission vehicles have a starter interlock that preventscranking the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to thefloor, then...

FORWARD AND REVERSE SENSING SYSTEMS (IF EQUIPPED) The forward and reverse sensing system will warn the driver of obstacleswithin a certain range of the front and rear bumpers. The front sensors will be activewhen the gearshift is in any positionother than P (Park) or N (Neutral)and the vehicle speed...

If the vehicle is equipped with aforward and reverse sensing system,the driver can disable the entiresystem (front and rear sensors) bypressing the parking aid off switchlocated on the lower portion of thecenter console. The message center will indicate afailure in the forward or reversesystem and w...

Active guidelines, fixed guidelines and centerline The active guidelines show the path of intended motion of the vehiclewhile reversing. The fixed guidelines assist a driver with backing into aparking space or aligning with an object behind the vehicle. Thecenterline assists a driver with aligning t...

Active guidelines project the intended path of the vehicle. Fixedguidelines show the actual direction the vehicle is moving. The fixed andactive guidelines will fade in and out depending on the steering wheelposition. When the steering wheel position is straight, the activeguidelines will not be sho...

When manual zoom is enabled, onlythe centerline will be shown. Rear camera delay After shifting out of R (Reverse) and into any gear other than P (Park),the image will remain until the vehicle speed reaches five mph (8 km/h).This will only occur if the rear camera delay feature is on, or until anyra...

WARNING: The rearview camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the rearview mirror and the side mirrors formaximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on t...

Servicing • If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer. • If the image is not clear, check if anything is covering the lens such asdirt, mud, ice, snow, etc. If the image is still not clear after cleaning,have your system inspect...

For best performance, drive the vehicle as parallel as possible whilepassing a parking space. If driven too fast (above 18 mph [30 km/h]) forthe system to measure parking spaces, the information display will showa corresponding message. When the system has found a space, the information display will...

When you determine the vehicle is back far enough, bring the vehicle toa complete stop and move the gearshift to D (Drive). When you determine the vehicle is far enough forward, bring the vehicleto a complete stop and move the gearshift to R (Reverse). Follow theinformation display instructions. The...

Why doesn’t APA position the vehicle where I want in the space? • The driver allows the vehicle to roll in the opposite direction of thetransmission (such as rolling forward when R (Reverse) gear isselected. • You may be driving in R (Reverse). APA can only look for a parkingspace while moving forwa...

BLIND SPOT MIRRORS Blind spot mirrors have an integrated convex spotter mirror built intothe upper outboard corner of the outside mirrors. They are designed toassist the driver by increasing visibility along the side of the vehicle. Formore information on your side view mirrors, refer to Exterior mi...

DRIVING THROUGH WATER If driving through deep or standingwater is unavoidable, proceed veryslowly. Never drive through waterthat is higher than the bottom ofthe wheel rims (for cars) or thebottom of the hubs (for trucks). When driving through water, traction or brake capability may be limited.Also, ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

Vehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s informationportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, cal...

FUEL PUMP SHUT-OFF In the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fuel to theengine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision due to this feature, you mayrestart your vehic...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

Fuse/Relay Number Fuse Amp Rating Protected Components F42 — Not used F43 — Not used F44 — Not used F45 — Not used F46 — Not used R1 Power relay Rear 15 relay (2/88) R2 — Not used R3 — Not used R4 — Not used R5 — Not used R6 — Not used Passenger compartment fuse panel The fuse panel is located on th...

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel firmlyand slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when...

• Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to: • Towing a trailer • Driving vehicles equip...

3. Remove the lug wrench and jackfrom the foam holder. Tire Change Procedure WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatictransmission) or R (Reverse) (m...

9. Remove the lug nuts with the lug wrench. 10. Replace the flat tire with the spare tire, making sure the valve stemis facing outward. Reinstall the lug nuts until the wheel is snug againstthe hub. Do not fully tighten the lug nuts until the wheel has beenlowered. 11. Lower the wheel by turning the...

4. Check all battery terminals and remove any excessive corrosion beforeyou attach the battery cables. Ensure that vent caps are tight and level. 5. Turn the heater fan on in both vehicles to protect from any electricalsurges. Turn all other accessories off. Connecting the jumper cables Note: In the...

Jump Starting 1. Start the engine of the booster vehicle and run the engine atmoderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables. Removing the j...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

Emergency towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and causedamage. • Do not spray a hot engine with ...

PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailable from your authorized dealer. • For routine cleaning, use Motorcraft 威 Detail Wash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and Tar Remover (ZC-42). WINDOWS ...

INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENS Clean the instrument panel, interior trim areas and cluster lens with aclean, damp, white cotton cloth, then use a clean and dry white cottoncloth to dry these areas. • Avoid cleaners or polishes that increase the gloss of the upper portionof the instr...

INTERIOR For fabric, carpets, cloth seats, safety belts and seats equipped with sideairbags: • Remove dust and loose dirt with a vacuum cleaner. • Remove light stains and soil with Motorcraft 威 Professional Strength Carpet & Upholstery Cleaner (ZC-54). • If grease or tar is present on the materi...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide to find out wh...

Working with the engine on 1. For vehicles equipped with an automatic transmission, set the parkingbrake and shift to P (Park). For vehicles equipped with a manualtransmission, set the parking brake, press and hold the clutch pedal,place the gearshift in N (Neutral), and release the clutch pedal. 2....

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT (Shown without engine cover, if equipped) 1. Engine coolant reservoir 2. Brake/Clutch fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Engine oil filler cap 7. Engine oil dipstick 8. Windshield washer fluid reservoir 1 2 ...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

1. Turn the ignition off beforeremoving the wiper blade. 2. Pull the wiper blade and armaway from the glass. 3. Squeeze the locking tabs torelease the blade from the arm andpull the blade away from the arm toremove it. 4. Attach the new blade to the arm and snap it into place. Lower thewiper arm and...

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is heard. If you find this procedure too difficult, please see your dealer. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance informatio...

• Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the engine is overfilled, some oil must beremoved from the engine by anauthorized dealer. 7. Put the dipstick back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions,...

economy requirements of the International Lubricant Standardization andApproval Committee (ILSAC), comprised of U.S. and Japaneseautomobile manufacturers. To protect your engine and engine’s warranty, use Motorcraft 威 SAE 5W-20 or an equivalent SAE 5W-20 oil meeting Ford specificationWSS-M2C945-A. S...

BATTERY Your vehicle is equipped with aMotorcraft 威 maintenance-free battery which normally does notrequire additional water during itslife of service. If your battery has a cover/shield, make sure it is reinstalledafter the battery has been cleaned or replaced. For longer, trouble-free operation, k...

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recycling centerto find out more about recyclingautomotive batteries. ENGINE COOLANT Checking engine coolant The concentration and level of engine coolant sho...

Note: Do not use stop leak pellets or cooling system sealants/additives as they can cause damage to the engine cooling and/or heating systems.This damage would not be covered under your vehicle’s warranty. • A large amount of water without engine coolant may be added, in caseof emergency, to reach a...

range as listed on the engine coolant reservoir (depending uponapplication). If you removed the radiator cap in an overflow system, fillthe radiator until the coolant is visible and radiator is almost full. 6. Replace the cap. Turn until tightly installed. Cap must be tightlyinstalled to prevent coo...

• If available, refer to the chart on the coolant container toensure the coolant concentration in your vehicle will provideadequate freeze protection at the temperatures in which youdrive in the winter months. If you drive in extremely hot climates: • It is still necessary to maintain the coolant co...

WARNING: Flexible fuel components and standard unleaded gasoline fuel components are not interchangeable. If your vehicle is not serviced in accordance with flexible fuel vehicles procedures,damage may occur and your warranty may be invalidated. WARNING: When refueling always shut the engine off and...

Easy Fuel 姞 “no cap” fuel system Your fuel tank is equipped with an Easy Fuel 威 “no cap” fuel filler system. This allows you to simply open the fuel filler door and insert the fuelfiller nozzle into the fuel system. The Easy Fuel 威 system is self-sealing and protected against dust, dirt, water and s...

WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel until the sound stops. Otherwise, fuel mayspray out, which could cause serious personal injury. Flex fuel vehicle (FFV) fuel fill inlet If your vehi...

FFV engine (if equipped) If your vehicle is flex fuel capable, it is designed to use Fuel Ethanol(Ed75–Ed85), “Regular” unleaded gasoline or any mixture of the twofuels. Use of other fuels such as Fuel Methanol may cause powertraindamage, a loss of vehicle performance, and your warranty may beinvali...

Cleaner air Ford endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the right fuel section. Running out of fuel Avoid running out of fuel because this situation may have an adverseeffect on powertrain components. If you have ru...

1. After lifting the carpeted wheelcover, locate the white plastic funnelnext to the spare tire. It can befound in either location as shown inthe graphic. 2. Slowly insert the funnel into theEasy Fuel 威 system. 3. Fill the vehicle with fuel from the portable fuel container. 4. When done, clean the f...

Filling the tank The advertised fuel capacity of the fuel tank on your vehicle is equal tothe rated refill capacity of the fuel tank as listed in the Maintenance product specifications and capacities section of this chapter. The advertised capacity is the amount of the indicated capacity and theempt...

5. Follow one of the simple calculations in order to determine fueleconomy: Calculation 1: Divide total miles traveled by total gallons used. Calculation 2: Multiply liters used by 100, then divide by total kilometers traveled. Keep a record for at least one month and record the type of driving (cit...

Maintenance • Keep tires properly inflated and use only recommended size. • Operating a vehicle with the wheels out of alignment will reduce fueleconomy. • Use recommended engine oil. Refer to Maintenance product specifications and capacities in this chapter. • Perform all regularly scheduled mainte...

Changing the air filter element 1. Loosen the screws that securethe air filter housing cover. 2. Carefully separate the two halvesof the air filter housing. 3. Remove the air filter elementfrom the air filter housing. 4. Wipe the air filter housing andcover clean to remove any dirt ordebris and to e...

MOTORCRAFT PART NUMBERS Component 2.0L GDI engine Air filter element FA-1908 1 Oil filter FL-910- S 2 Battery BXT-96R-500/BXT-96R-590 Spark plugs 3 Cabin air filter FP70 Windshield wiper blade WW-2802-PF (driver side)WW-2803-PF (passenger side) 1 Failure to use the correct air filter element may res...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

Peace of mind • Keyless entry keypad • Wheel locks • Remote start • Bumper mounted parking assist system* • Vehicle security systems *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designedand developed by the accessory manu...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? Carefully following this schedule helps protect against major repairexpenses resulting from neglect or inadequate maintenance and may alsohelp to increase the value of your vehicle when you sell or trade it. It is your responsibility to see ...

Ford Motor Company parts in performance and durability. It is theowner’s responsibility to determine the equivalency of such parts. Pleaseconsult your Warranty Guide for complete warranty information. Chemicals or additives not approved by Ford are not required for factoryrecommended maintenance. In...

Value shopping for your vehicle’s maintenance needs Your dealership recognizes the competitive landscape of maintenance andlight repair automotive services. With factory-trained technicians, andone-stop service from routine maintenance like oil changes and tirerotations to repairs like brake service...

Normal Scheduled Maintenance At every oil changeinterval as indicatedby the messagecenter Change engine oil and filter Rotate tires, inspect tire wear and measure treaddepth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (ifequipped with dipstick); consult de...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Operating in dusty conditions such as unpaved or dusty roads Inspect frequently,service as required Replace cabin air filter (if equipped) Replace engine air filter Every 5,000 miles(8,000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag Rotate tires, inspect ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Edge/MKX AWD only – vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent o...

911 Assist™ ................................82 A Accessing call history/phonebook during active call ...............66 Accessing your media menufeatures ........................................91 Accessing your phone menufeatures ........................................69 Accessory delay ..............

Emergencies, roadside jump-starting ..........................314running out of fuel .................355 Emission control system ..........359 End user license agreement ....106 Engine ................................371–372 cleaning ...................................329coolant ......................

tire grades ...............................230treadwear ........................229, 234 Towing .......................................255 recreational towing .................255trailer towing ..........................255wrecker ....................................317 Traffic, Directions andInform...