Ford 2006 Freestar v.1- User Manual

SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk of personal injury to yourself or others? Inthis guide, answers to such questions are contained in commentshighlighted by the warning triangle symbol. These comments should beread and observed. Warning symbol...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner’s Guide. Special instructions For your added safety, your vehicl...

To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access event data recorder information without obtaining consent,unless pursuant to court order or where required by law enforcement,other government authorit...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Child Seat InstallationWarning Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Brake Fluid -...

WARNING LIGHTS AND CHIMES Standard instrument cluster Optional instrument cluster Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause extensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.Many lig...

bulb works. If any light remains on after starting the vehicle, refer to therespective system warning light for additional information. Check engine: The Check Engine indicator light illuminates when theignition is first turned to the ONposition to check the bulb. Solidillumination after the engine ...

Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected, have the systemserviced immediately by yourauthorized dealer. Normal braking is still functional unless the brakewarning light also is illuminated. Airbag readiness: If this light fails t...

Engine coolant temperaturegauge: Indicates engine coolant temperature. At normal operatingtemperature, the needle will be inthe normal range (between “H” and“C”). If it enters the red section, the engine is overheating. Stopthe vehicle as soon as safelypossible, switch off the engine and let the eng...

AUDIO SYSTEMSAM/FM stereo system (if equipped) 1. / Tuner: Press to manually go up or down the radiofrequency. Also use in menu modeto select various settings. 2. Audio: Press to access select various settings. Treble: Press to adjust the treble setting. Use / / SEEK, SEEK . Bass: Press to adjust th...

Treble: Press to adjust the treble setting. Use / / SEEK . Balance: Press to adjust the audio between the left and right speakers. Use / / SEEK . Fade: Press to adjust the audio between the front and rear speakers. Use / / SEEK . Speed sensitive volume (if equipped): Radio volume automatically chang...

CD/CD player care Do: • Handle discs by their edges only. Never touch the playing surface. • Inspect discs before playing. Clean only with an approved CD cleanerand wipe from the center out. Don’t: • Expose discs to direct sunlight or heat sources for extended periodsof time. • For vehicles equipped...

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED) 1. Temperature selection: Controls the temperature of theairflow in the vehicle. 2. Air flow selections: Controls the direction of the airflow in thevehicle. See the following for a briefdescription on each control. MAX A/C: Distributes recircu...

will be warmer or cooler than the driver airflow temperature settingwhen more than one rear temperature light ( REAR ) is illuminated. 5. R Rear defroster: Press to activate/deactivate rear window defroster. Refer to Rear window defroster later in this chapter for more information. 6. Recirculated a...

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITH REARPASSENGER COMPARTMENT CLIMATE CONTROL (IF EQUIPPED) 1. Defrost: Distributes outside air through the windshield defroster vents. Can be used to clear thin ice or fog from the windshield. 2. Rear temperature control: Press to enable the auxiliary system...

19. REAR: Press to enable the control located in the rear seat. Press again to turn the auxiliary system off. Operating tips • To reduce fog build up on the windshield during humid weather, placethe air flow selector in the position. • To reduce humidity build up inside the vehicle: do not drive wit...

AUXILIARY CLIMATE CONTROL (IF EQUIPPED) 1. Fan speed: Turn to select the desired fan speed. 2. Temperature/mode selection: The distribution of air from theoverhead and floor registers is basedon the temperature selected. Turnto select for comfort. To use the rear climate controls,ensure that REAR is...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, licenseplate lamps and tail lamps. Turns the headlamps on. Note: Some vehicles may be equipped with a headlamps on with wipers feature. In order for this feature to work: • the ignition must be in run and the f...

To program the auto lamp exit time delay: 1. Start with the ignition in the OFF position and the headlamp controlin the autolamp position. 2. Deselect the auto lamps. 3. Put the ignition in RUN. 4. Put the ignition in OFF. 5. Select the autolamps. • Note: Steps 2 through 5 must be performed within a...

Flash to pass Pull toward you slightly to activateand release to deactivate. Battery saver The battery saver will shut off the exterior lamps and interior lamps,except the hazard warning lamps if activated, 10 minutes after theignition control has been turned off. The battery saver will extend theti...

• In order to turn off the domelamp, rotate the thumbwheel to the left. The dome lamp will not illuminate if the control switch is in the OFFposition. AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of...

5. Locate the vertical adjuster oneach headlamp, then use a # 2Phillips screwdriver to turn theadjuster either counterclockwise (toadjust up) or clockwise (to adjustdown) positioning the horizontaledge of the high intensity light onthe horizontal reference line. 6. HORIZONTAL AIM IS NOTREQUIRED FOR ...

door is opened. If the control is moved to the driver’s side position, thelamp will not come on at all. The dome lamp will illuminate whenever a front door is opened. If eitherfront door has been opened from the outside, the lamp will remain on for20 seconds after the door is shut. If any other door...

Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure headlamp switch is in the OFF position, then open thehood. 2. Remove the two retainer pins torelease the headlamp assembly andpull headlamp assembly forward toexpose the back of the bulb. 3. Disconnect the electricalconnector from th...

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers;rotate towards you to decrease thespeed of the wipers. Windshield washer: Push the end of the stalk: • briefly: causes a single swipe ofthe wipers without washer fluid. • a quick pus...

TILT STEERING WHEEL To adjust the steering wheel: 1. Pull and hold the steering wheelrelease control toward you. 2. Move the steering wheel up ordown until you find the desiredlocation. 3. Release the steering wheelrelease control. This will lock thesteering wheel in position. Never adjust the steer...

Conversation mirror The conversation mirror allows thedriver to view the rear seating area. This does not replace therear view mirror. Electronic compass/temperaturedisplay (if equipped) The overhead console may have anelectronic compass and outside air temperature display. The compassheading and ou...

Note: Look for a parking lot away from buildings, light posts, manhole covers, sewer and drainage grates and other metallic objects. Somemagnetic objects may be hidden underground. Look for signs ofunderground utilities, water mains or other industrial structures. Theparking lot should be level and ...

Manual door operation when vehicle is stopped or parked on adownhill grade In some cases it may be necessaryto have someone hold the doorwhile rear seat passengers areentering or exiting the vehicle. Thehold open mechanism will restrainthe door open when the vehicle isparked on moderate downhillgrad...

The Power Door Lockout Control islocated in the overhead console.With the control in the OFFposition, power operation is disabledfrom both PSD handles and fromboth second row passengerswitches. The overhead console switch and remote entry transmitter willoperate the power doors regardless of the pos...

To power close the PSD with the inside or outside release handle: • Manually pull the door about 6 inches in the desired direction oftravel. The power door assist will take over and complete the open orclose operation. Pressing any of the switches, overhead console, second row passenger, orremote en...

To open the sliding door when thechild safety lock is on: • Unlock the sliding door and openthe door from the outside. • Press the right or left handcontrol on the overhead consoleor the remote to open the door. • The second row passenger switch will still be functional to open thedoor. To prevent t...

Cigar/Cigarette lighter (if equipped) Do not plug optional electrical accessories into the cigarette lightersocket.Do not hold the lighter in with your hand while it is heating, this willdamage the lighter element and socket. The lighter will be released fromits heating position when it is ready to ...

Power vent windows Do not leave children unattended in the vehicle and do not letchildren play with the power vent windows. They may seriously injure themselves. When closing the power vent windows, you should verify theyare free of obstructions and ensure that children and/or pets are not in the pr...

POWER SIDE VIEW MIRRORS To adjust your mirrors: 1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise toadjust the left mirror. 2. Move the control in the directionyou wish to tilt the mirror. 3. Return to the center position tolock mirrors in place. Heated...

Fold-away mirrors Carefully pull the outside mirrorsinwards when driving through anarrow space, like an automatic carwash. POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED) The accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is in the P (Park) position. ...

Setting speed control The controls for using your speedcontrol are located on the steeringwheel for your convenience. 1. Press the ON control and releaseit. 2. Accelerate to the desired speed. 3. Press the SET + control andrelease it. 4. Take your foot off the acceleratorpedal. 5. The indicator ligh...

Turning off speed control There are two ways to turn off the speed control: • Depress the brake pedal. This willnot erase your vehicle’spreviously set speed. • Press the speed control OFFcontrol. Note: When you turn off the speed control or the ignition, your speedcontrol set speed memory is erased....

CENTER CONSOLE (IF EQUIPPED) Your vehicle may be equipped with a utility compartment. POSITIVE RETENTION FLOOR MAT (IF EQUIPPED) To install floor mats that have a retention post: Position the floor mat so that theeyelet is over the pointed end of theretention post and rotate forward tolock in. Make ...

Note: If the indicator light blinks rapidly for two seconds and then turns to a continuous red, proceed with Steps 6 through 8 to completeprogramming of a rolling code equipped device. 6. At the garage door opener receiver (motor-head unit) in the garage,locate the “learn” or “smart” button (usually...

Operating the HomeLink 姞 Wireless Control System To operate, simply press and releasethe appropriate HomeLink 威 button. Activation will now occur for thetrained product (garage door, gateoperator, security system, entrydoor lock, or home or office lightingetc.). For convenience, thehand-held transmi...

MESSAGE CENTER (IF EQUIPPED) With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle informationthrough a constant monitor ofvehicle systems. You may selectdisplay features on the messagecenter for a display of status preceded by a brief ...

System check Selecting this function from theSETUP menu causes the messagecenter to cycle through each of thesystems being monitored. For eachof the monitored systems, themessage center will indicate awarning message for three secondswhen there is a malfunction. Pressing the RESET control cycles the...

• Warning returns upon another event. This acts as a reminder that these warning conditions still exist withinthe vehicle. Driver’s door ajar Warning cannot be reset Passenger door ajar Left rear door ajar Right rear door ajar Park brake set Warning returns after 10 minutes Check brake system Liftga...

An oil change is required whenever indicated by the message center.USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change[approximately 5,000 miles (8,000 km) or 180 days] perform thefollowing: 1. Press the SETUP control toaccess the System Check function....

LIFTGATE Unlock the liftgate (but not releaseit) with the power door lock systemand remote entry transmitter. To open the liftgate, pull the liftgatehandle rearward. • Do not open the liftgate in agarage or other enclosed areawith a low ceiling. If the liftgate isopened, the liftgate could bedamaged...

To power open the PLG withoutside release handle: 1. Ensure that the Power DoorLockout Control in the overheadconsole is ON. 2. Ensure that the PLG is unlocked,using the remote entry transmitteror power door unlock. Refer to Remote Entry System in the Locks and security chapter. 3. Pull up on the li...

PLG encounters an obstacle while opening, the PLG will stop when itencounters a solid obstacle. Close the liftgate manually and remove theobstruction. Normal operation can then be resumed. Resetting the PLG: The power liftgate may not operate properly if any of the followingconditions occur: • a low...

CARGO AREA FEATURES Cargo net (if equipped) The cargo pouch net secureslightweight objects in the cargoarea. Attach the net to the anchorsprovided. Do not put more than50 lbs. (22 kg) in the net. The cargo net is notdesigned to restrain objects during a collision or heavybraking. Utility hooks The u...

KEYS The key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer. You should always carry a second key with you in a safe place in caseyou require it in an emergency. Refer to the SecuriLock 娂 passive anti-theft system section in this chapter for more ...

Unlocking the liftgate during a battery failure In the event of a vehicle power failure affecting the liftgate latch, theliftgate can be unlocked manually. 1. Locate the liftgate trim accesspanel in the center of the liftgate. 2. Using your key, a smallscrewdriver or knife, pry off theaccess panel. ...

CHILDPROOF DOOR LOCKS • When these locks are set, thesliding doors cannot be openedwith the inside handle. • The sliding doors can be openedfrom the outside when the doorsare unlocked. The childproof lock controls arelocated on front edge of each slidingdoor and must be set separately for each door....

Opening power liftgate (PLG) (if equipped) Press the control twice within three seconds to power open the powerliftgate. The interior lamps will illuminate. Make sure all persons areclear of the power liftgate area before using the powerliftgate controls to open or closethe liftgate. Press the contr...

5. Snap the two halves back together. Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmittershould operate normally after battery replacement. Replacing lost remote entry transmitters If you would like to have your remo...

9. Turn the ignition to the 3 (OFF) position after you have finishedprogramming all of the remote entry transmitters. 10. The doors will lock, then unlock, to confirm that the programmingmode has been exited. Illuminated entry The interior lamps illuminate when the key in the driver’s door lockcylin...

The keypad can be operated with the factory set 5–digit entry code; thiscode is located: • on the owner’s wallet card in the glove box, • marked on the passenger compartment fuse panel (located below andto the left of the steering, near the brake pedal), • and is available from yourauthorized dealer...

5. Turn the ignition back to the 4 (ON) position. The horn will chirp. 6. Press the unlock control, then press the lock control. The horn willchirp once if autolock was deactivated or twice (one short and one longchirp) if autolock was activated. 7. Turn the ignition to the 3 (OFF) position. The hor...

SEATING Notes: Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in the event of a collision. Do not pile cargo higher than the seatbacks to reduce the risk ofinjury in a collision or sudden stop. Before returning the seatback to...

Push control to lower head restraint. Adjusting the front manual seat (if equipped) Never adjust the driver’s seat or seatback when the vehicle ismoving. Always drive and ride with your seatback upright and the lapbelt snug and low across the hips. Lift handle to move seat forward orbackward. Pull l...

Before returning the seatback to its original position, make surethat cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, pull on theseatback to ensure that it has fully latched. An unlatched seat maybecome dangerous in the event of a sudd...

Using the manual lumbar support (if equipped) The lumbar control is located on theinboard side of the seat under thearmrest. Rotate the control to change thefirmness of the lumbar support. Memory seats/sideview mirrors/adjustable pedals (if equipped) This system allows automaticpositioning of the dr...

REAR SEATS Head restraints Lift the head restraint so that it is located directly or as close as possiblebehind your head. The head restraints can be movedup and down by pulling up on thehead restraint. Push button to lower head restraint. Seat mounted cup holders (if equipped) Deploy by pressing th...

The cupholder is designed to detach from the seat when subjected toheavy load. The cupholder can be reinstalled by returning to the closedposition. Use only soft cups in the cupholder. Hard objects can injure youin a collision. Adjusting 2nd row seats (if equipped) Lift control to adjust seat forwar...

Second row bench seat To exit the third row, activate theeasy entry system by pulling on thestrap on the rear of the seat. Thiswill cause the seatback to flipforward and the seat track latchesto open. Push the seat forward to alloweasier exit from the third row. After exiting the third row, pushrear...

3. Place seat in tumbled position.(See Accessing 3rd row seat ) 4. From inside the vehicle, pull upon front floor release handle. 5. Rotate the seat rearward at a 30to 45 degree angle. 2006 Freestar (win) Owners Guide (post-2002-fmt)USA (fus) Seating and Safety Restraints 121

2. Find the clips attached near theends of the lap/shoulder belts. 3. Clip the end of the belt to thestationary portion of the shoulderbelt coming out of the trim panel. The end of the shoulder belt must be clipped in order to keep it fromstriking anything during vehicleoperation. 2006 Freestar (win...

3. Lower back of seat onto the reartubs until both release controls latchinto place. Be sure that the seat islocked in place both front and back. Do not place the seat front hooks on the front most pin of the front tub.Doing so will not allow the seat to fully install in vehicle. Ensure seat is latc...

4. Store the belt in the housingfound on the ceiling by inserting thesmaller tongue in the slot provided. Note: The seat can be stowed with the safety belt connected if desired.Store the tongue of the slidinglatchplate in the belt pocket toavoid potential damage to the seat. 5. Push the head restrai...

3. To return the seat, ensure seatlatching area is free of objects.Then, raise the seat off the liftgatescuff plate and push at the top ofthe seat back to rotate the seat backonto the latches. Pull up on thehead restraints to raise them. Ensure seat is latched to vehicle floor by pushing/pulling on ...

occupants, this occurs when the occupant is not properly restrained byseat belts or child safety seats and they move forward during pre-crashbraking. The most effective way to reduce the risk of unnecessaryinjuries is to make sure all occupants are properly restrained. Accidentstatistics suggest tha...

Front safety belt energy management retractors The front outboard safety belt energy management retractors allowwebbing to be pulled out of the retractor in a gradual and controlledmanner in response to the occupant’s forward momentum. This helpsreduce the risk of force-related injuries to the occup...

Never let a passenger hold a child on his or her lap while thevehicle is moving. The passenger cannot protect the child from injury in a collision. All occupants of the vehicle, including the driver, should alwaysproperly wear their safety belts, even when an air bag supplemental restraint system (S...

All safety restraints in the vehicle are combination lap and shoulderbelts. All of the passenger combination lap and shoulder belts have twotypes of locking modes described below: Vehicle sensitive mode This is the normal retractor mode, which allows free shoulder belt lengthadjustment to your movem...

• Grasp the shoulder portion andpull downward until the entirebelt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clickingsound. This indicates the safety belt is now in the automatic lockingmode. How to disengage the automatic locking mode Ford Motor Company recom...

Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt andincrease the risk of injury in a collision. Third row comfort guide Note: Before stowing the third row s...

If... Then... The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes have elapsed since theignition switch has been turnedON... The BeltMinder 娂 feature will not activate. The driver’s or frontpassenger’s safety belt is...

Do not sit on top of a buckled safety belt to avoid theBeltMinder 娂 chime. Sitting on the safety belt will increase the risk of injury in an accident. To disable (one-time) or deactivate theBeltMinder 娂 feature please follow the directions stated below. One time disable If at any time the driver/fro...

• Step 3 must be completed within 50 seconds after the safety beltwarning light turns off. 3. For the seating position being disabled, at a moderate speed, bucklethen unbuckle the safety belt 9 times, ending in the unbuckled state.(Step 3 must be completed within 50 seconds after the safety beltwarn...

assemblies (if equipped), LATCH child seat tether anchors and loweranchors (if equipped), and attaching hardware, should be inspected aftera collision. Ford recommends that all safety belt assemblies in use invehicles involved in a collision be replaced. However, if the collision wasminor and an aut...

The airbag supplemental restraint system (SRS) is designed to work inconjunction with the safety belts to help protect the driver and frontoutboard passenger from certain upper body injuries. The term“supplemental restraint” means the airbags are intended as a supplementto the safety belts. Airbags ...

To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching thepedals comfortably. • Recline the seat slightly one or two degrees from the upright position. Do not put anything on or over the airbag module. Placingobjects on or over the air...

How does the airbag supplemental restraint system work? The airbag SRS is designed toactivate when the vehicle sustainslongitudinal deceleration sufficientto cause the sensors to close anelectrical circuit that initiates airbaginflation. The fact that the airbagsdid not inflate in a collision does n...

Several air bag system components get hot after inflation. Do nottouch them after inflation. If the air bag has deployed, the air bag will not function again and must be replaced immediately. If the air bag is not replaced, the unrepaired area will increase the risk of injury in acollision. The SRS ...

• the system determines that a small child is present in a forward-facingchild restraint that is installed according to the manufacturer’sinstructions, • the system determines that a small child is present in a booster seat, • a front passenger takes his/her weight off of the seat for a period oftim...

To reduce the risk of possible serious injury:Do not stow objects in seat back map pocket (if equipped) or hang objects off seat back if a child is in the front passenger seat.Do not place objects underneath the front passenger seat or betweenthe seat and the center console (if equipped).Check Passe...

Do not lean your head on the door. The side airbag could injureyou as it deploys from the side of the seatback. Do not attempt to service, repair, or modify the airbag SRS, itsfuses or the seat cover on a seat containing an airbag. See your authorized dealer. All occupants of the vehicle should alwa...

The airbag was designed to inflate between the door panel and occupantto further enhance the protection provided occupants in side impactcollisions.The airbag SRS is designed to activate when the vehicle sustains lateraldeceleration sufficient to cause the sensors to close an electrical circuitthat ...

Do not lean your head on the door. The Safety Canopy 娂 could injure you as it deploys from the headliner. Do not attempt to service, repair, or modify the Safety Canopy 娂 system, its fuses, the A, B, C or D pillar trim, or the headliner on a vehicle containing a Safety Canopy 娂 . See your authorized...

If the Safety Canopy 娂 system has deployed, the Safety Canopy 娂 will not function again unless replaced.The Safety Canopy 娂 system (including the A, B, C, and Dpillar trim) must be inspectedand serviced by an authorizeddealer. If the Safety Canopy 娂 is not replaced, the unrepaired areawill increase ...

Important child restraint precautions You are required by law to use safety restraints for children in the U.S.and Canada. If small children (generally children who are four years oldor younger and who weigh 40 lb. [18 kg] or less) ride in your vehicle, youmust put them in safety seats made especial...

To improve the fit of both the lap and shoulder belt on children whohave outgrown child safety seats, Ford Motor Company recommends useof a belt-positioning booster. Booster seats position a child so that safety belts fit better. They lift thechild up so that the lap belt rests low across the hips a...

• Those with a high back. If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boosterseat would be a better choice. Both can be used in any vehicle in a seating position equipped withlap/shoulder belts if your child is over 40 lb....

The importance of shoulder belts Using a booster without a shoulder belt increases the risk of a child’shead hitting a hard surface in a collision. For this reason, you shouldnever use a booster seat with a lap belt only. It is best to use a boosterseat with lap/shoulder belts in the back seat- the ...

Installing child safety seats with combination lap and shoulderbelts Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the wayback. Children 12 and un...

7. Pull the lap belt portion acrossthe child seat toward the buckle andpull up on the shoulder belt whilepushing down with your knee on thechild seat. 8. Allow the safety belt to retract toremove any slack in the belt. 9. Before placing the child in theseat, forcibly move the seat forwardand back to...

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING New vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrades can be found whereapplicable on the tire sidewallbetween tread shoulder andmaximum section width. Forexample: • Treadwear 200 Traction AA Temperatu...

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. Temperature A B C The temperature grades are A (the highest), B and C, representing thetire’s resistance to the gene...

Under-inflation is the most common cause of tire failures andmay result in severe tire cracking, tread separation or ⬙ blowout ⬙ , with unexpected loss of vehicle control and increased risk of injury.Under-inflation increases sidewall flexing and rolling resistance,resulting in heat buildup and inte...

when you get to the pump. It is normal for tires to heat up and the airpressure inside to go up as you drive. Never “bleed” or reduce airpressure when tires are hot. 2. Remove the cap from the valve on one tire, then firmly press the tiregauge onto the valve and measure the pressure with the tire ga...

Tire wear When the tread is worn down to1/16th of an inch (2 mm), tires mustbe replaced to help prevent yourvehicle from skidding andhydroplaning. Built-in treadwearindicators, or “wear bars”, whichlook like narrow strips of smoothrubber across the tread will appearon the tire when the tread is worn...

If your vehicle is stuck in snow, mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. Never spin the tires in excess of the 35 mph (55 km/h) pointindicated on the speedometer. Highway h...

TIRE REPLACEMENT REQUIREMENTS Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. Only use replacement tires and wheels that are the same sizeand type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. Us...

Information on “P” type tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) 1. P: Indicates a tire, designated by the Tir...

12. Treadwear, Traction and Temperature Grades • Treadwear: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on aspecified government test course. For example, a tire graded 150would wear one and one-half (1 1 ⁄ 2 ) times as well ...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: 1. LT: Indicates a tire, designated by the Tire and Rim Association(T&RA), that is intended for serviceon ...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. 1. T: Indicates a type of tire, ...

Changing tires with TPMS Each road tire is equipped witha tire pressure sensor fastenedto the inside rim of the wheel.The pressure sensor is coveredby the tire and is not visibleunless the tire is removed. Thepressure sensor is locatedopposite (180 degrees) from thevalve stem. Care must be takenwhen...

Low Tire PressureWarning Light Possible cause Customer Action Required Solid Warning Light Tire(s)under-inflated 1. Check your tire pressure toensure they are properlyinflated; refer to Inflating your tires in this chapter. Ford Motor Company recommendsthe use of a digital or dial-typetire pressure ...

Low Tire PressureWarning Light Possible cause Customer Action Required Flashing WarningLight (flashes for 20to 30 seconds eitherat start-up or whiledriving) Spare tire in use Your temporary spare tire is in use. Repair the damaged roadwheel and re-mount it on thevehicle to restore systemfunctionalit...

How temperature affects your tire pressure The Tire Pressure Monitoring System (TPMS) monitors tire pressure ineach pneumatic tire. The pressure in each tire is dependent upon severalfactors, one of them being the contained air temperature (temperature ofthe air inside the tire). As the contained ai...

Follow these guidelines when using snow tires and chains: • Use only cable type SAE Class “S” chains. Conventional link or othertype chains may cause damage to your vehicle’s wheelhouse and/orunderbody. • These cable type chains should only be applied to the front wheels. • Install chains securely, ...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. 2006 Freestar (win) Owners Guide (post-2002-fmt)USA (fus) Tires, Wheels and Loading 202

GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance...

GVWR (Gross Vehicle WeightRating) – is the maximum allowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo). The GVWR is shown on theSafety Compliance CertificationLabel located on the B-Pillar orthe edge of the driver’s door.The GVW must never exceed theGV...

mandatory options, no cargo (internal or external), a tongue load of10–15% (conventional trailer) or king pin weight of 15–25% (fifth wheeltrailer), and driver only (150 lb. [68 kg]). Consult your authorized dealer (or the RV and Trailer Towing Guide provided by your authorized dealer) for more deta...

capacity to carry you, 4 of your friends and all the golf bags? You andfour friends average 220 lb. (99 kg) each and the golf bags weighapproximately 30 lb. (13.5 kg) each. The calculation would be: 1400 –(5 x 220) – (5 x 30) = 1400 – 1100 – 150 = 150 lb. Yes, you haveenough load capacity in your ve...

Vehicle towing capability/Trailer hitch requirement Trailer Model/ Engine GCWR - lb. (kg) Hitch type required Trailer Weight range - lb. (kg) Tongue load Van, 3.9L 7000 (3175) Class I Non- Equalizing Weight Carrying 0-2000 (0–907) 10–15% of TW (200 lb. [91 kg] maximum) Wagon, 3.9L Wagon, 4.2L 7200 (...

Tongue Load section in the trailer towing chart earlier in this section for range details on a specific trailer load. Safety chains Always connect the trailer’s safety chains to the hook retainers on thehitch. To connect the trailer’s safety chains, cross the chains under thetrailer tongue and allow...

• Turn off the speed control. The speed control may shut offautomatically when you are towing on long, steep grades. • Consult your local motor vehicle speed regulations for towing a trailer. • To eliminate excessive shifting, use a lower gear. This will also assistin transmission cooling. (For addi...

RECREATIONAL TOWING Follow these guidelines for your specific powertrain combination to towyour vehicle with all four wheels on the ground (such as behind arecreational vehicle). These guidelines are designed to ensure that your transmission is notdamaged due to insufficient lubrication. All Front W...

STARTING Positions of the ignition 1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning. 2. LOCK, locks the steering wheel,automatic transmission gearshiftlever and allows key removal. 3. OFF, shuts off the engine and allaccessories without lockin...

Important ventilating information If the engine is idling while the vehicle is stopped for a long period oftime, open the windows at least one inch (2.5 cm) or adjust the heatingor air conditioning to bring in fresh air. USING THE ENGINE BLOCK HEATER (IF EQUIPPED) An engine block heater warms the en...

ABS warning lamp The ABS lamp in the instrumentcluster momentarily illuminateswhen the ignition is turned on. Ifthe light does not illuminate duringstart up, remains on or flashes, theABS may be disabled and may need to be serviced. Even when the ABS is disabled,normal braking is still effective. (I...

If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper steering alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull. AUTOMATIC T...

When parking, do not use the gearshift in place of the parkingbrake. Always set the parking brake fully and make sure that the gearshift is securely latched in Park (P). Turn off the ignitionwhenever you leave your vehicle. Never leave your vehicle unattendedwhile it is running. If you do not take t...

This system is not designed to prevent contact with small ormoving objects. The system is designed to provide a warning to assist the driver in detecting large stationary objects to avoid damagingthe vehicle. The system may not detect smaller objects, particularlythose close to the ground. Certain a...

The RSS is automatically enabledwhen the gear selector is placed inR (Reverse) and the ignition is ON.The park aid disable switch allowsthe driver to disable the RSS onlywhen the ignition is ON, and thegear selector is in R (Reverse). TheOFF indicator remains illuminatedwhen the system is disabled. ...

ROADSIDE ASSISTANCE Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24–hours, seven days a week • for the...

U.S. Ford or Mercury vehicle customers who require roadside assistance,call 1–800–241–3673; Lincoln vehicle customers call 1–800–521–4140. Canadian customers who require roadside assistance, call1–800–665–2006. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse...

This switch is located behind theservice panel on the right side ofthe cargo area. To reset the switch: 1. Turn the ignition OFF. 2. Check the fuel system for leaks. 3. If no leaks are apparent, reset theswitch by pushing in on the resetbutton. 4. Turn the ignition ON. 5. Wait a few seconds and retu...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 12 5A Brake-Shift Interlock (BSI) Runfeed, Climate control system Runfeed 13 5A Compass/Driver heatedseat/Passenger heatedseats/Reverse sensingsystem/Power LiftgateModule/Power sliding door Runfeeds 14 5A Underhood fuse...

Power distribution box The power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that protect yourvehicle’s main electrical systems from overloads. Always disconnect the battery before servicing high currentfuses. To reduce risk of electri...

Auxiliary relay box (cooling fans) The relay box is located in the engine compartment by the radiator. Fuse/Relay location Fuse amp rating Description 1 — Cooling fan relay #4 2 — Cooling fan relay #5 3 — Cooling fan relay #3 4 — Cooling fan relay #1 5 — Cooling fan relay #2 6 40A* Right-hand coolin...

The use of tire sealants may damage your tires. The use of tiresealants may also damage your Tire Pressure Monitoring System and should not be used. Your vehicle is equipped with a Tire Pressure Monitoring System.Refer to Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and Loading chapte...

Have a flat tire serviced by an authorized dealer in order to preventdamage to the TPMS sensor, refer to Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and Loading chapter. Replace the spare tire with a road tire as soon as possible. The spare tire and tools for your vehicle are stowed ...

2. Turn the wrenchcounterclockwise until cable is slackand tire can be slid rearward. 3. Remove the primary retainer fromthe center of the tire. Note: Do not stow the full size tire or any flat tire under the vehicle. Stowing the primary tether Note: If no tire is to be stowed under the vehicle, rai...

11. Remove the jack and fullytighten the lug nuts in the ordershown. Refer to Wheel lug nut torque specifications later in this chapter for the proper lug nuttorque specification. 12. Installing the optional wheelcover or center ornament: • If equipped with a bolted-onwheel cover, install the wheelc...

3. Lay the tire flat and secure the cable with wing screw by installing iton the wing screw retainer in the floor and turning the wing screwclockwise. You will hear an audible click when the tire is properlysecured. 4. Check that the flat tire is properly secured. Stowing the spare tire 1. Lay the s...

2. Do not disconnect the battery of the disabled vehicle as this coulddamage the vehicle’s electrical system. 3. Park the booster vehicle close to the hood of the disabled vehiclemaking sure the two vehicles do not touch. Set the parking brake on both vehicles and stay clear of the engine cooling fa...

4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second ...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Remove the jumper cable on the negative (...

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of thedisabled vehicle’s battery. After the disabled vehicle has been started and the jumper cablesremoved, allow it to idle for several minutes so the...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed by wheel lift or flatbedequipment. Do not tow with a slingbelt....

GETTING THE SERVICES YOU NEED At home You must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfac...

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer.Experience has shown that our customers have been very successful inachieving satisfaction by following the three-step procedure outlined onthe front page of the Warr...

trucks which are within the terms of any applicable written new vehiclewarranty are eligible for review, except those involving: • a non-Ford product • a non-authorized dealership • sales disputes between customer and authorized dealer except thoseassociated with warranty repairs or concerns with th...

After a case is reviewed, the Board mails you a decision letter and aform on which to accept or reject the Board’s decision. The decisions ofthe Board are binding on Ford (and, in some cases, on the authorizeddealer) but not on consumers who are free to pursue other remediesavailable to them under s...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which isavailable from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can dis...

• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips. • Always read the instructions before using the products. ALUMINUM WHEELS AND WHEEL COVERS Aluminum wheels and wheel covers are coated with a clearcoat paint...

• Cover the highlighted areas to prevent water damage when cleaningthe engine. • Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage. PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailab...

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol orMotorcraft Premium Windshield Washer Concentrate (ZC-32–A),available from your authorized dealer. This washer fluid containsspecial solution in addition to alcohol which helps to remove the hotwax deposited on the wiper blade and w...

• Remove light stains and soil with Motorcraft Professional StrengthCarpet & Upholstery Cleaner (ZC-54). • If grease or tar is present on the material, spot-clean the area firstwith Motorcraft Spot and Stain Remover (ZC-14). • If a ring forms on the fabric after spot cleaning, clean the entire a...

quality products have been specifically engineered to fulfill yourautomotive needs; they are custom designed to complement the styleand appearance of your vehicle. Each product is made from high qualitymaterials that meet or exceed rigid specifications. For best results, usethe following products or...

SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the engine compartment for easylocation. • We provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer ca...

OPENING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel. 2. Go to the front of the vehicle and release the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood and secure it withthe prop rod. Your ve...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 3.9L/4.2L V6 engines 1. Brake fluid reservoir 2. Air filter assembly 3. Power distribution box 4. Battery 5. Automatic transmission fluid dipstick 6. Engine oil dipstick 7. Engine oil filler cap 8. Windshield washer fluid reservoir 9. Engine coolant r...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specification WSB-M8B16–A2.Do not use any special washer fluidsuch as windshield water repellenttype fluid or bug wash. They m...

CHANGING THE WIPER BLADES To replace the wiper blades: 1. Pull the wiper arm away from thewindshield and lock into the serviceposition. 2. Turn the blade at an angle fromthe wiper arm. Push the lock pinmanually to release the blade andpull the wiper blade down towardthe windshield to remove it from ...

5. Locate and carefully remove theengine oil level indicator (dipstick). 6. Wipe the indicator clean. Insert the indicator fully, then remove itagain. • If the oil level is within this range, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below this mark, engine oil must be added...

• Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the engine is overfilled, some oil must beremoved from the engine by anauthorized dealer. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions...

economy requirements of the International Lubricant Standardization andApproval Committee (ILSAC), comprised of U.S. and Japaneseautomobile manufacturers. To protect your engine’s warranty use Motorcraft SAE 5W-20 or anequivalent 5W-20 oil meeting Ford specification WSS-M2C930-A. SAE 5W-20 oil provi...

If your battery has a cover/shield, make sure it is reinstalledafter the battery has been cleaned or replaced. For longer, trouble-free operation, keep the top of the battery clean anddry. Also, make certain the battery cables are always tightly fastened tothe battery terminals. If you see any corro...

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recycling centerto find out more about recyclingautomotive batteries. ENGINE COOLANT Checking engine coolant The concentration and level of engine coolant sho...

When the engine is cold, check thelevel of the engine coolant in thereservoir. • The engine coolant should be at the “FULL COLD” level or within the“COLD FILL RANGE” as listed on the engine coolant reservoir(depending upon application). • Refer to scheduled maintenance information for service interv...

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hot engine parts. Do not put engine coolant in the windshield washer fluidcontainer. If sprayed on the windshield, engine...

coolant degas system with a pressurized cap, or if it is necessary toremove the coolant pressure relief cap on the radiator of a vehicle withan overflow system, follow these steps to add engine coolant. To reduce the risk of personal injury, make sure the engine iscool before unscrewing the coolant ...

Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recyclingand disposing of automotive fluids. Coolant refill capacity To find out how much fluid your vehicle’s cooling system can hold, referto Refill capacities in this section....

FUEL FILTER For fuel filter replacement, see your authorized dealer. Refer to scheduled maintenance information for the appropriate intervals for changing the fuel filter. Replace the fuel filter with an authorized Motorcraft part. Thecustomer warranty may be void for any damage to the fuel systemif...

Refueling Fuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; • Keep spa...

If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The customer warranty maybe void for any damage to the fuel tank or fuel system if thecorrect genuine Ford or Motorcraft fuel filler cap is not used. The fuel system may be under pressure. If...

• The indicator may come on. For more information on the “Check Engine” or the “Service engine soon” indicator, refer to Warning lights and chimes in the Instrument Cluster chapter. ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Your best source of information about actual fuel economy is you,...

• Have the vehicle loading and distribution the same every time. Your results will be most accurate if your filling method is consistent. Calculating fuel economy 1. Fill the fuel tank completely and record the initial odometer reading(in miles or kilometers). 2. Each time you fill the tank, record ...

the description in the Warning lights and chimes section of the Instrument Cluster chapter. Your vehicle may not pass the I/M test with the indicator on. If the vehicle’s powertrain system or its battery has just been serviced,the on-board diagnostics system is reset to a “not ready for I/M test”con...

BRAKE FLUID The fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the “MIN” and“MAX” lines are within the normaloperating range; there is no need toadd fluid. If the fluid levels areoutside of the normal operatingrange the perfor...

Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and result in damage to internal transmission components. AIR FILTER Refer to scheduled maintenance information for the appropriate intervals for changing t...

REFILL CAPACITIES Fluid Ford PartName Application Capacity Brake fluid Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeFluid 1 All Fill to MAX lineon reservoir Engine oil(includes filterchange) 3 Motorcraft SAE5W-20 PremiumSynthetic BlendMotor Oil (US)Motorcraft SAE5W-20 SuperPremium MotorOil (Can...

LUBRICANT SPECIFICATIONS Item Ford partname Ford partnumber Ford specification Brake fluid MotorcraftHighPerformanceDOT 3 MotorVehicle BrakeFluid 1 PM-1 ESA-M6C25-A Doorweatherstrips SiliconeSprayLubricant XL-6 ESR-M13P4-A Enginecoolant MotorcraftPremiumGold EngineCoolant(yellowcolored) VC-7-A (U.S....

Item Ford partname Ford partnumber Ford specification Door latch,hood latch,auxiliaryhood latch,door andliftgatehinges,striker plates,seat tracks,sliding doorboth sides(upper andlower track)and fuel fillerdoor hinge. Multi-PurposeGrease XG-4 or XL-5 ESB-M1C93-B Lockcylinders MotorcraftPenetratingand...

Item Ford partname Ford partnumber Ford specification Windshieldwasher fluid MotorcraftPremiumWindshieldWasherConcentrate ZC-32–A WSB-M8B16–A2 1 Use only brake fluids certified to meet Ford specifications. DOT 3 fluid is recommended. However, if DOT 3 is not available, DOT 4 fluid can be used. 2 Ens...

The Vehicle Identification Number (VIN) contains the followinginformation: 1. World manufacturer identifier 2. Brake type and Gross VehicleWeight Rating (GVWR) 3. Vehicle line, series, body type 4. Engine type 5. Check digit 6. Model year 7. Assembly plant 8. Production sequence number TRANSMISSION/...

GENUINE FORD ACCESSORIES FOR YOUR VEHICLE A wide selection of Genuine Ford Accessories are available for yourvehicle through your local authorized Ford or Ford of Canada dealer.These quality accessories have been specifically engineered to fulfill yourautomotive needs; they are custom designed to co...

Rear seat entertainment systems - DVD Ash cup/coin holder Trailer hitches, wiring harnesses and accessories Roof carriers Peace of mind First aid and safety kits Full vehicle covers Locking gas cap Remote start Vehicle security systems Mobile-Ease 娂 hands-free communication system For maximum vehicl...

A Accessory delay ..........................65AdvanceTrac ..............................217Air cleaner filter ...............298, 302Air filter, cabin ............................42Airbag supplemental restraintsystem ................148–149, 157, 159 and child safety seats ............150description...

headlamps, flash to pass ..........45instrument panel, dimming .....45interior lamps .....................47–49replacing bulbs .............49, 51–53 Lane change indicator(see Turn signal) ........................47 Liftgate ............................84, 88, 96 Lights, warning and indicator ....10...

Turn signal ..................................47 V Vehicle dimensions ...................306 Vehicle Identification Number(VIN) ..........................................308 Vehicle loading ..........................200 Ventilating your vehicle ...........215 W Warning lights (see Lights) .......10 ...