Ford 2002 Windstar- Manual

Page 2 - Video Entertainment System is automatically; Quick Start — How to get going

QUICK START — HOW TO GET GOING To operate the system: 1. Your AutoVision t Video Entertainment System is automatically activated when the vehicle ignition and the audio system are ON. 2. If a movie is desired, insert a VHS cassette into the VCP and the videoshould start playing. 3. Press the MEDIA c...

Page 3 - To play a video game:; Connect the video line from your game device to the VIDEO jack.

To play a video game: 1. Connect the video line from your game device to the VIDEO jack. 2. Connect the left and right audio cables to the left (L) and right (R)audio jacks. 3. Ensure that the system is in AUX mode. The LCD screen will turn onand the AUX indicator will illuminate. 4. If desired, pre...

Page 4 - SAFETY INFORMATION; Introduction

Your AutoVision t Video Entertainment System allows you to watch movie rentals and your favorite home videocassettes. It also allows youto plug in and play a variety of standard video games. Please review thisuser manual to become familiar with the AutoVision t Video Entertainment System features an...

Page 6 - Temperature extremes; High/low temperature sensor circuit; Excessively high or low temperatures may cause damage to the VCP.; Humidity and moisture condensation; Dew sensor circuit

Temperature extremes When the vehicle is parked under direct sunlight or in an extremely coldplace for a long period of time, wait until the cabin temperature of thevehicle is at normal temperature before operating the system. High/low temperature sensor circuit • Excessively high or low temperature...

Page 8 - Description

AUTOVISION T VIDEO ENTERTAINMENT SYSTEM Features • 2–head hi-fi playback • AutoPlay feature • Digital auto tracking • Dual stereo headphone with electric volume control • Self docking connection for easy mobile installation • Latching system for secure safety • Carrying handle for portability • Wate...

Page 9 - VCP CONTROLS

VCP CONTROLS 1. LED display The display lamp will light up in green when power is supplied to thevideocassette player. 2. POWER key Press to toggle between ON/OFF. When the power is ON, other keys(PLAY, FF, REW, STOP) will illuminate. 3. PLAY key Press to playback a videocassette tape. 4. REWIND/REV...

Page 13 - ADJUSTING THE VOLUME; From the AutoVision; USING HEADPHONES/PERSONAL AUDIO FEATURE; To activate: press the

ADJUSTING THE VOLUME This control allows the rear seatpassengers to adjust the volumelevel of the audio system. Press the + control to increase thevolume. Press the — control to decrease thevolume. From the AutoVision t Video Entertainment System controls, the speaker volume cannot be set higher tha...

Page 14 - Rear Seat Controls; MEDIA SELECT

Press the / control again to engage the rear speakers and deactivate the Personal Audio Feature. SINGLE PLAY will appear in theradio display. For more information on Single Play and Dual Play, please refer to the Rear Seat Controls section in the Entertainment Chapter of your Owner’s Guide. SPEAKERS...

Page 17 - GENERAL OPERATION; on the media control panel.; Inserting/removing cassette; Inserting cassette; Open the AutoVision; Removing cassette; After removing the cassette from the VCP, close the door.; To play a video game; Operating Instructions

GENERAL OPERATION • When the engine is not running, use the system sparingly otherwise itwill run the battery down. • Do not leave the videocassette in the VCP overnight or for longperiods of time. • When the ignition is turned ON, audio is through the headphones asLOW volume. Press the (+) control ...

Page 18 - Playback operation; Press the FF or REW control on the VCP.; Special effects playback; The still playback feature can also be used in REW (reverse) mode.

2. Connect the left and right audio cables to the WHITE and RED jacksrespectively. 3. Ensure that the system is in AUX mode. The LCD screen will turn onand the AUX indicator will illuminate. On-screen indicators Playback operation 1. Press the POWER control on the VCP. 2. Insert a videocassette into...

Page 19 - Press the ENCORE control while in playback mode.; AUXILIARY INPUT JACKS; Video Entertainment

If still playback/or frame-to-frame playback is engaged for five minutes orlonger, the VCP will automatically begin playback to protect the tape. Automatic tracking is automatically activated the moment the VCP isturned ON or a cassette is inserted. If a videocassette is in poor shape (i.e., badly r...

Page 20 - Video source selection; selects the Auxiliary; AutoPlay feature; Your AutoVision

Video source selection The MEDIA control determineswhich video (VCP or Auxiliaryinput) is seen on the AutoVision t screen. When the vehicle ignition is ON andthe system is not in VCP mode, theAutoVision t selects the Auxiliary input as the video source. (If thereis not a video source connected tothe...

Page 21 - Videocassette Player Display Messages

INDICATIONS ON THE VCP The operation and status of the VCPcan be checked by the indicationsappearing on the LED display.1. The Power indicator flashes on during POWER ON and will blinkwhen in emergency mode.2. The HI-FI indicator illuminates when a HI-FI tape is loaded.3. The HP1 indicator illuminat...

Page 22 - the dew sensor is activated for high humidity

Illuminates during power off whenthere is not a cassette present inthe system. Illuminates when the videocassetteis in REW (rewind) mode. Illuminates when the videocassetteis in FF (fast forward) mode. Illuminates when the videocassetteis in STIL (pause) mode. Illuminates when the videocassetteis in...

Page 24 - Plug headphones into these jacks.

1. VIDEO IN Connect this terminal to theVIDEO OUT terminal of yourother apparatus (DVD, gamemachine, etc.). 2. AUDIO IN LR Connect these terminal(s) to theAUDIO OUT terminals of yourother apparatus (DVD, gamemachine, etc.). 3. Plug headphones into these jacks. In-Home Use 24

Table of Contents:

Other Manuals for Ford 2002 Windstar

Summary

Other Ford Models