Ford 1999 Mustang- Manual

High beams Illuminates when thehigh beam headlampsare turned on. Safety belt Momentarily illuminateswhen the ignition isturned to the ONposition to remind youto fasten your safety belts. For more information,refer to the Seating and safety restraints chapter. Charging system Illuminates when theigni...

Service engine soon Your vehicle is equippedwith a computer thatmonitors the engine’semission control system.This system iscommonly known as the On Board Diagnostics System(OBD II). The OBD II system protects the environmentby ensuring that your vehicle continues to meetgovernment emission standards...

consists of a cold engine startup followed by mixedcity/highway driving.) No additional vehicle service isrequired. If the Service Engine Soon light remains on, have your vehicle serviced at the first available opportunity. Light is blinking: Engine misfire is occurring which could damage yourcataly...

Traction Control Y active This light momentarilyilluminates when theignition is turned toON. It also illuminateswhen the Traction Control y system begins applying and releasing the brakes and adjusting the enginecharacteristics to limit a wheelspin condition. It willbe lit for a minimum of four seco...

and more needs to be added. This lamp will alsoilluminate when the ignition is turned to ON and theengine is off. For more information on adding enginecoolant, refer to Engine coolant in the Maintenance and care chapter. Safety belt warning chime Chimes to remind you to fasten your safety belts. For...

Optional instrument cluster gauges Fuel gauge Displays approximatelyhow much fuel is in thefuel tank (when thekey is in the ONposition). The fuel gauge may vary slightly when thevehicle is in motion. The ignition should be in theOFF position while the vehicle is being refueled.When the gauge first i...

Never remove the coolant reservoir capwhile the engine is running or hot. This gauge indicates the temperature of the enginecoolant, not the coolant level. If the coolant is not atits proper level the gauge indication will not beaccurate. Speedometer Indicates the current vehicle speed. • Base instr...

Battery voltage gauge This gauge shows thebattery voltage whenthe ignition is in theON position. If thepointer moves and stays outside the normaloperating range (as indicated), have the vehicle’selectrical system checked as soon as possible. Engine oil pressure gauge This shows the engineoil pressur...

HEADLAMP CONTROL • Pull the headlampcontrol toward youto the first positionto turn on theparking lamps, taillamps, license platelamps and markerlamps. • Pull the headlamp control toward you to the outerposition to turn on the headlamps (in addition tothe previous lamps). Daytime running lamps (DRL) ...

PANEL DIMMER CONTROL To adjust thebrightness of theinstrument panel: • Rotate clockwise/counterclockwisewhen the headlampcontrol is in theparking lamp or low-beam position. To turn on the courtesy lamps: • Rotate fully counterclockwise. REAR WINDOW DEFROSTER (IF EQUIPPED) The rear defrostercontrol i...

CLIMATE CONTROL SYSTEM Manual heating and air conditioning system Fan speed control Controls the volume ofair circulated in thevehicle. Temperature control knob Controls thetemperature of theairflow inside thevehicle. Mode selector control Controls the directionof the airflow to theinside of the veh...

the windshield defroster ducts. If the temperatureis about 10°C (50°F) or higher, the air conditionerwill automatically dehumidify the air to reducefogging. • -Distributes outside air through the windshield defroster ducts. It can be used to clearice or fog from the windshield. If the temperatureis ...

top of your instrument panel. These objects canfall down into the defroster outlets and blockairflow and possibly damage your climate controlsystem. Do not place objects on top of theinstrument panel, as these objects may become projectiles in a collision or sudden stop. USING YOUR AUDIO SYSTEM AM/F...

Seek function in tape mode The Automatic MusicSearch (AMS) featureallows you to quicklylocate the beginning ofthe tape selection being played or to skip to thenext selection. • Press the AMS control. • Press to listen to the previousselection on thetape. • Press to listen to the next selection on th...

Setting memory preset stations 1. Select the frequencyband with the AM/FMselect control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold amemory preset controluntil the sound returns,indicating the station isheld in memory on ...

• Press (+) or (−) onthe volume controlto increase ordecrease treble output. Speaker balance adjust Speaker sound distribution can be adjusted betweenthe right and left speakers. • Push the AUDIOcontrol repeatedlyuntil the displayreads BAL. • Press the (+) side ofthe volume controlto shift sound to ...

AM/FM Stereo/Cassette/MACH 460 SoundSystem T with Premium AM/FM Stereo Cassette Power control Press the control toturn the audio systemon or off. Volume control Press the control toraise or lower volume. If the volume is setabove a certain level and the ignition is turned off,the volume will come ba...

• Press to scan forward selections. Press the SCAN/TUNE button again to stop the scanmode on the current selection. Radio station memory preset The radio is equipped with five station memorypreset controls. These controls can be used to selectup to five preset AM stations and ten FM stations(five in...

Tape play select Insert a cassette tape into the cassette deck. Push only slightly when inserting a cassette tape(with the open edge to the right). A cassette deckloading mechanism pulls the tape in the rest of theway. Press PLAY to begincassette tape play. Rewind/fast forward function in tape mode ...

Setting the clock Press the CLOCKcontrol whilesimultaneouslydepressing the SEEKcontrol. • Press to set the hours. • Press to set the minutes. Premium AM/FM Stereo Single CDRadio/Premium Sound or MACH 460 SoundSystem T with Single CD Radio Power control Press the control toturn the audio systemon or ...

• Push the AUDIOcontrol repeatedlyuntil the displayreads BAL. • Press the (+) side ofthe volume controlto shift sound to theright speakers. • Press the (−) side ofthe volume controlto shift sound to the left speakers. Speaker fade adjust Speaker sound distribution can be adjusted betweenthe front an...

Scan function Press the SCAN controlto enter the scanmode. The CD playerwill begin scanning theCD, stopping on each listenable track forapproximately eight seconds. This continues untilyou press the SCAN control a second time or ejectthe CD. While in the scan mode, the display flashesSCAN. Reverse/f...

Compression adjust brings soft and loud CDpassages together for a more consistent listeninglevel. Shuffle feature The shuffle featureplays all tracks on thecurrent CD in randomorder. Press the SHUFFLE control to start this feature.Random order play will continue until the control ispressed again. Ej...

• The player’s internal temperature is above 60°C(140°F). Allow the player to cool down beforeoperating. • A disc with format and dimensions not withinindustry standards is inserted. Cleaning compact discs Inspect all discs for contamination before playing. Ifnecessary, clean discs only with an appr...

Radio frequency information The Federal Communications Commission (FCC)and the Canadian Radio and TelecommunicationsCommission(CRTC) establish the frequencies AMand FM stations may use for their broadcasts.Allowable frequencies are: AM 530, 540–1600, 1610 kHz FM 87.9, 88.1–107.1, 107.9 MHz Not all f...

To turn speed control off • Press OFF or • Turn off the vehicleignition. Once speed control is switched off, the previouslyprogrammed set speed will be erased. To set a speed • Press SET/SET ACC/SET ACCEL. Forspeed control tooperate, the speedcontrol must be ONand the vehiclespeed must begreater tha...

INTERIOR LAMPS Map lamps (if equipped) If equipped with aconvertible top themap lamps andcontrols are located onthe rearview mirror.Press the controls oneither side of each maplamp to activate the lamps. POWER WINDOWS (IF EQUIPPED) Press and hold the rocker switches to open andclose windows. • Press...

Express down To make the driverwindow open fullywithout holding thewindow control, pressthe driver windowcontrol completelydown and releasequickly. Depress againto stop windowoperation. Window lock The window lockfeature allows only thedriver to operate thepower windows. To lock out all thewindow co...

2. Move the control inthe direction you wishto tilt the mirror. 3. Return to the center position to lock mirrors inplace. POSITIVE RETENTION FLOOR MAT(IF EQUIPPED) Position the floor mat sothat the eyelet is over thepointed end of theretention post and rotateforward to lock in. Makesure that the mat...

Foglamp control (if equipped) Turn on the parkinglamps or the low-beamheadlamps. Press thetop portion of thefoglamp control,located on the centerconsole, to activate thefoglamps. The foglampLED will illuminate when the foglamps are on. Press the bottom portion of the foglamp control todeactivate the...

2. Check the convertible top stowage compartmentbehind the rear seat to be sure it is empty and readyto receive the top. 3. Unclamp the top from the windshield header atboth the right and left sides by pulling each clamprearward until the hook in the windshield header isfree. The clamps are flush wi...

Raising the convertible top The convertible top will not operate unless theparking brake is engaged. Do not raise the top whilethe vehicle is moving because the top may beseverely damaged. To raise the convertible top: 1. Bring the vehicle to a complete stop. Engage theparking brake. Key must be in ...

Opening the trunk Press the control onceto open the trunk.Ensure that the trunkis closed and latchedbefore driving yourvehicle. Failure to latchthe trunk may causeobjects to fall out ofthe trunk or block the rear view. Sounding a panic alarm Press this control toactivate the alarm. To deactivate the...

The inside lights will not turn off if: • they have been turned on with the dimmercontrol or • any door is open. The battery saver will shut off the interior lamps 30minutes after the ignition has been turned to theOFF position, 10 minutes after if the door is leftopen, and 30 minutes after if the t...

The SecuriLock y passive anti-theft system is not compatible with aftermarket remote start systems.Use of these systems may result in vehicle startingproblems and a loss of security protection. Largemetallic objects or devices such as the MobilSpeedpass y on the same key ring as your SecuriLock y ke...

Lift handle to moveseat forward orbackward. Pull lever up to adjustseatback. Adjusting the front power seat (if equipped) Never adjust the driver’s seat or seatbackwhen the vehicle is moving. Do not pile cargo higher than the seatbacksto avoid injuring people in a collision or sudden stop. Always dr...

Press to raise or lowerthe front portion of theseat cushion. Press to raise or lowerthe rear portion of theseat cushion. Press the control tomove the seat forward,backward, up or down. Using the power lumbar support (if equipped) The power lumbarcontrol is located onthe outboard side ofthe seat. Pre...

Using the manual lumbar support (if equipped) The lumbar control islocated on the inboardside of the driver’sseatback. Move the control up toincrease firmness anddown to decreasefirmness. Rear seat entry/exit Use the seatback release to fold the back of thefront seat forward for rear seat passenger ...

2nd seat/Split-folding rear seat (if equipped) One or both rear seatbacks can be folded down toprovide additional cargo space. To lower theseatback(s) from insidethe vehicle, pull tab torelease seat back andthen fold seatbackdown. When raising the seatback(s), make sure you hearthe seat latch into p...

It is extremely dangerous to ride in a cargoarea, inside or outside of a vehicle. In a collision, people riding in these areas are morelikely to be seriously injured or killed. Do not allowpeople to ride in any area of your vehicle that isnot equipped with seats and safety belts. Be sureeveryone in ...

The automatic locking mode is not available on thedriver safety belt. When to use the automatic locking mode • When a tight lap/shoulder fit is desired. • Anytime a child safety seat is installed in a passenger front or outboard rear seating position(if equipped). Refer to Safety Restraints for Chil...

• Allow the belt to retract. As the belt retracts, youwill hear a clicking sound. This indicates thesafety belt is now in the automatic locking mode. How to disengage the automatic locking mode Disconnect the combination lap/shoulder belt andallow it to retract completely to disengage theautomatic l...

Do not attempt to service, repair, or modifythe Air Bag Supplemental Restraint System or its fuses. See your Ford or Lincoln-Mercurydealer. Children and air bags For additionalimportant safetyinformation, read allinformation on safetyrestraints in this guide. Children must alwaysbe properly restrain...

considerable force, there is the risk of death orserious injuries such as fractures, facial and eyeinjuries or internal injuries, particularly to occupantswho are not properly restrained or are otherwise outof position at the time of air bag deployment. Thus,it is extremely important that occupants ...

A difficulty with the system is indicated by one ormore of the following: • The readiness lightwill either flash orstay lit. • The readiness lightwill not illuminate immediately after ignition isturned on. • A series of five beeps will be heard. The tonepattern will repeat periodically until the pro...

Never let a passenger hold a child on his orher lap while the vehicle is moving. The passenger cannot protect the child from injury in acollision. Always follow the instructions and warnings thatcome with any infant or child restraint you mightuse. When possible, always place children under age 12in...

PREPARING TO START YOUR VEHICLE Engine starting is controlled by the ignition system.This system meets all Canadian Interference-CausingEquipment standard requirements regulating theimpulse electrical field strength of radio noise. When starting a fuel-injected engine, avoid pressingthe accelerator ...

Important safety precautions A computer system controls the engine’s idlerevolutions per minute (RPM). When the enginestarts, the idle RPM runs faster to warm the engine.If the engine idle speed does not slow downautomatically, have the vehicle checked. Do notallow the vehicle to idle for more than ...

Guarding against exhaust fumes Although odorless and colorless, carbon monoxide ispresent in exhaust fumes. Take precautions to avoidits dangerous effects. If you ever smell exhaust fumes of any kindinside your vehicle, have your dealer inspect and fix your vehicle immediately. Do not drive ifyou sm...

BRAKES Your service brakes are self-adjusting. Refer to thescheduled maintenance guide for scheduledmaintenance. Occasional brake noise is normal and often does notindicate a performance concern with the vehicle’sbrake system. In normal operation, automotive brakesystems may emit occasional or inter...

The ABS operates bydetecting the onset ofwheel lockup duringbrake applicationsand compensating forthis tendency. Thewheels are preventedfrom locking evenwhen the brakes are firmly applied. Theaccompanying illustration depicts the advantage ofan ABS equipped vehicle (on bottom) to a non-ABSequipped v...

stopping distance. Always leave enough roombetween your vehicle and the vehicle in front ofyou to stop. • We recommend that you familiarize yourself withthis braking technique. However, avoid taking anyunnecessary risks. Hydraulic brake booster system (Hydroboost) The Hydroboost system receives flui...

(when the ignition is turned ON) until the parkingbrake is released. Always set the parking brake fully and makesure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (FirstGear) (manual transmission). The parking brake is not recommended to stop amoving vehicle. Ho...

controlled by automatically applying and releasingthe rear brakes in conjunction with engine torquereductions. Engine torque reduction is realized viathe fully electronic spark and fuel injection systems.This process is very sensitive to driving conditionsand very fast acting. The rear wheels “searc...

To prevent damage to the power steering pump: • Never hold the steering wheel to the extremeright or the extreme left for more than a fewseconds when the engine is running. • Do not operate the vehicle with a low powersteering pump fluid level. If the power steering system breaks down (or if theengi...

Do not drive your vehicle until you verifythat the brakelamps are working. If your vehicle gets stuck in mud or snow it may berocked out by shifting from forward and reversegears, stopping between shifts, in a steady pattern.Press lightly on the accelerator in each gear. Do not rock the vehicle for ...

N (Neutral) With the gearshift in N(Neutral), the vehiclecan be started and isfree to roll. Hold thebrake pedal down whilein this gear. (Overdrive) The normal drivingposition for the bestfuel economy.Transmission operatesin gears one throughfour. (Overdrive) can be deactivated by pressingthe transmi...

MANUAL TRANSMISSION OPERATION(IF EQUIPPED) Using the clutch Vehicles equipped with a manual transmission have astarter interlock that prevents cranking the engineunless the clutch pedal is fully depressed. When starting a vehicle with a manual transmission,you must: 1. Put gearshift in N(Neutral). 2...

Recommended shift speeds Do not downshift into 1 (first) when yourvehicle is moving faster then 24 km/h (15 mph).This will damage the clutch. Upshift according to the following chart: Upshifts when accelerating (recommended for best fuel economy) Shift from: 1 - 2 18 km/h (11 mph) 2 - 3 31 km/h (19 ...

4. Turn the ignition keyto position 3 (OFF). Do not park your vehicle in Neutral, it maymove unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully. Reverse You can shift into R (Reverse) only by moving thegearshift to the right of 5 (Fifth) gear before youshift into R (...

gearshift back into Neutral. Then, release theclutch pedal for a moment and repeat steps 2through 4. Removing key from ignition • Turn the ignition keyto position 3 (OFF). • Push the releaselever forward androtate the keytowards you andremove. TRACTION-LOK AXLE (IF EQUIPPED) This axle provides added...

VEHICLE LOADING Before loading a vehicle, familiarize yourself with thefollowing terms: • Base Curb Weight : Weight of the vehicle including any standard equipment, fluids,lubricants, etc. It does not include passengers oraftermarket equipment. • Payload : Combined maximum allowable weight of cargo,...

• Maximum Trailer Weight : maximum weight of a trailer the loaded vehicle (including passengersand cargo) is permitted to tow. It is determinedby subtracting the weight of the loaded trailertowing vehicle from the GCWR for the towingvehicle. • Trailer Weight Range : Specified weight range that the t...

Always ensure that the weight of passengers, cargoand equipment being carried is within the weightlimitations that have been established for yourvehicle including both Gross Vehicle Weight andFront and Rear Gross Axle Weight Rating limits.Under no circumstance should these limitations beexceeded. Ex...

If you use a rental trailer, follow the instructions thatthe rental agency gives to you. Do not attach safety chains to the bumper. Trailer brakes Electric brakes and manual, automatic or surge-typebrakes are safe if installed properly and adjusted tothe manufacturer’s specifications. The trailer br...

Exceeding the GCWR rating may cause internaltransmission damage and void your warrantycoverage. Servicing after towing If you tow a trailer for long distances, your vehiclewill require more frequent service intervals. Refer toyour Scheduled Maintenance guide for moreinformation. Trailer towing tips ...

DRIVING THROUGH WATER Do not drive quickly through standing water,especially if the depth is unknown. Traction or brakecapability may be limited and if the ignition systemgets wet, your engine may stall. Water may alsoenter your engine’s air intake and severely damageyour engine. If driving through ...

HAZARD FLASHER Use only in an emergency to warn traffic of vehiclebreakdown, approaching danger, etc. The hazardflashers can be operated when the ignition is off. • The hazard lightscontrol is located ontop of the steeringcolumn. • Depress hazardlights control toactivate all hazardflasherssimultaneo...

Use the following procedure to reset the fuel pumpshut-off switch. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pumpshut-off switch by pushing in on the reset button. 4. Turn the ignition to the ON position. Pause for af...

Standard fuse amperage rating and color COLOR Fuse Rat- ing Mini Fuses Stan- dard Fuses Maxi Fuses Car- tridge Maxi Fuses Fuse Link Car- tridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow...

Fuse/Relay Location Fuse Amp Rating Description 34 20A Instrument Cluster,CCRM, Data LinkConnector, SecurilockTransceiver Module 35 15A Shift Lock Actuator,PCM, Speed ControlServo, ABS Module 36 15A Airbag Control Module 37 10A Adjustable Illumination 38 20A Highbeams 39 5A GEM 40 — Not Used 41 15A ...

Temporary spare tire information Your vehicle may have a temporary spare tire. Thetemporary spare tire for your vehicle is labeled assuch. It is smaller than a regular tire and is designedfor emergency use only. Replace this tire with afull-size tire as soon as possible. If you use the temporary spa...

Never use the reardifferential as ajacking point. To lessen therisk of personal injury, do not put anypart of your bodyunder the vehiclewhile changing a tire.Do not start theengine when yourvehicle is on the jack.The jack is onlymeant for changingthe tire. 6. Remove the lug nuts with the lug wrench....

Anti-theft lug nuts (if equipped) If your vehicle isequipped with thisfeature, one of the lugnuts on each wheelmust be removed and replaced with a special key.The key and registration card are attached to the lugwrench and stored with the spare tire. If you losethe key, send the registration card to...

Do not push start your vehicle. You coulddamage the catalytic converter. Batteries contain sulfuric acid which canburn skin, eyes, and clothing, if contacted. Do not attempt to push start your vehicle.Automatic transmissions do not havepush-start capability. Preparing your vehicle 1. Use only a 12–v...

Connecting the jumper cables 1. Connect the positive (+) booster cable to thepositive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Connect the other end of the positive (+) cable tothe positive (+) term...

4. Make the final connection of the negative (-)cable to an exposed metal part of the stalledvehicle’s engine, away from the battery and thecarburetor/fuel injection system. The preferred locations of an exposed metal part (to ground the circuit) are the alternator mounting brackets or an engine lif...

Removing the jumper cables Remove the jumper cables in the reverse orderthat they were connected. 1. Remove the jumper cable from the ground metal surface. 2. Remove the jumper cable on the negative (-)connection of the booster vehicle’s battery. 3. Remove the jumper cable from the positive (+)termi...

4. Remove the jumper cable from the positive (+)terminal of the disabled vehicle’s battery. After the disabled vehicle has been started and thejumper cables removed, allow it to idle for severalminutes so the engine computer can relearn its idle conditions. Wrecker towing If you need to have your ve...

SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the enginecompartment for easy location. • We provide a Scheduled Maintenance Guide whichmakes tracking routine service easy. If your vehicle requires professional service, yourdealership can provide nec...

2. Turn off the engine and remove the key. 3. Block the wheels to prevent the vehicle frommoving unexpectedly. • Manual transmission: 1. Set the parking brake. 2. Depress the clutch and place the gearshift in 1(First). 3. Turn off the engine and remove the key. 4. Block the wheels to prevent the veh...

OPENING THE HOOD 1. Inside the vehicle,pull the hood releasehandle located underthe bottom left cornerof the instrumentpanel. 2. Go to the front of the vehicle and release theauxiliary latch that is located under the front centerof the hood. 3. Lift the hood and secure it with the prop rod. HOOD Mai...

2. Turn the engine off and wait a few minutes forthe oil to drain into the oil pan. 3. Set the parking brake and ensure the gearshift issecurely latched in P (Park) (automatictransmissions) or 1 (First) (manual transmissions). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefu...

• If the oil level isbelow the MIN mark,add enough oil toraise the level withinthe MIN—MAXrange. • Oil levels above the MAX mark may cause enginedamage. Some oil must be removed from theengine by a service technician. 7. Put the indicator back in and ensure it is fullyseated. Adding engine oil 1. Ch...

Brake fluid is toxic. If you use a brake fluid that is not DOT 3,you will cause permanent damage to your brakes. Do not let the reservoir for the mastercylinder run dry. This may cause the brakes to fail. CLUTCH ADJUSTMENT (IF EQUIPPED) Check the clutchadjustment. Refer tothe ScheduledMaintenance Gu...

ENGINE COOLANT • 3.8L OHV V6 engine • 4.6L V8 engine Check the level of the engine coolant in thereservoir. Refer to the Scheduled Maintenance Guidefor service interval schedules. Be sure to read andunderstand Precautions when servicing your vehicle in this chapter. If the engine coolant has not bee...

Plain water may be added in an emergency, but you must replace it with a 50/50 mixture of coolant and distilled water as soon as possible. Check the coolant level in the coolant reservoir thenext few times you drive the vehicle. If necessary,add enough of a 50/50 mixture of coolant anddistilled wate...

Always dispose of used automotive fluids in a responsible manner. Follow your community’s regulations and standards for recycling and disposingof automotive fluids. Coolant refill capacity To find out how much fluid your vehicle’s coolingsystem can hold, refer to Refill capacities in the Capacities ...

If your vehicle isequipped with the3.8L V6 engine, check the power steeringfluid level with theengine at normaloperating temperature. 1. Start the engine andlet it run until itreaches normaloperating temperature(the engine coolanttemperature gaugeindicator will be nearthe center of thenormal area be...

If your vehicle isequipped with a 4.6LV8 engine, check the power steering fluidlevel with the engine atambient temperature.Allow at least one-halfhour after driving forthe power steeringfluid to cool. 1. Start the engine andallow the engine toidle. 2. Turn the steeringwheel left and rightseveral tim...

could result when the vehicle reaches normaloperating temperature. The transmission fluidshould be in this rangeif at normal operatingtemperature (66°C-77°C [150°F-170°F]). The transmission fluidshould be in this rangeif at ambienttemperature (10°C-35°C [50°F-95°F]). High fluid level Fluid levels ab...

An overfill condition of transmission fluid maycause shift and/or engagement concerns and/orpossible damage. Checking and adding manual transmission fluid 1. Clean the filler plug. 2. Remove the fillerplug and inspect thefluid level. 3. Fluid level should beat bottom of theopening. 4. Add enough flu...

BATTERY Your vehicle isequipped with aMotorcraftmaintenance-freebattery which normallydoes not requireadditional water duringits life of service. However, for severe usage or in high temperatureclimates, check the battery electrolyte level. Refer tothe Scheduled Maintenance Guide for the serviceinte...

Batteries normally produce explosive gaseswhich can cause personal injury. Therefore, do not allow flames, sparks or lighted substancesto come near the battery. When working near thebattery, always shield your face and protect youreyes. Always provide proper ventilation. When lifting a plastic-cased...

Changing the wiper blades To replace the wiper blades: 1. Pull the wiper armaway from thewindshield and lockinto the serviceposition. 2. Turn the blade at anangle from the wiperarm. Push the lock pinmanually to release theblade and pull thewiper blade downtoward the windshieldto remove it from the a...

Motor Vehicle Safety Standard No. 109. Grades Band A represent higher levels of performance on thelaboratory test wheel than the minimum required bylaw. The temperature grade for this tire isestablished for a tire that is properly inflated and not overloaded. Excessive speed,underinflation, or exces...

• 15 or 16 inch fourtire rotation • 17 inch four tirerotation Replacing the tires Replace the tires whenthe wear band isvisible through the tiretreads. Maintenance and care 156

When replacing full size tires, never mixradial bias-belted, or bias-type tires. Use only the tire sizes that are listed on theCertification Label. Make sure that all tires are thesame size, speed rating, and load-carrying capacity.Use only the tire combinations recommended onthe label. If you do no...

The tires on your vehicle have all weather treads toprovide traction in rain and snow. However, in someclimates, you may need to use snow tires andchains. Use chains on the tires only in an emergencyor if the law requires them. Follow these guidelines when using snow tires andchains: • Chains may da...

• Avoid getting fuel liquid in your eyes. If fuel issplashed in the eyes, remove contact lenses (ifworn), flush with water for 15 minutes and seekmedical attention. Failure to seek proper medicalattention could lead to permanent injury. • Fuels can also be harmful if absorbed through theskin. If fue...

• Keep the fuel pump nozzle in contact with thefuel container while filling. • DO NOT use a device that would hold the fuelpump handle in the fill position. Fuel Filler Cap Your fuel tank filler cap has an indexed design witha 1/8 turn on/off feature. When fueling your vehicle: 1. Turn the engine of...

“Premium” unleaded gasoline is not recommended(particularly in the United States) because it maycause these problems to become more pronounced.If the problems persist, see your dealer or a qualifiedservice technician. It should not be necessary to add any aftermarketproducts to your fuel tank if you...

ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Your best source of information about actual fueleconomy is you, the driver. You must gatherinformation as accurately and consistently aspossible. Fuel expense, frequency of fillups or fuelgauge readings are NOT accurate as a measure offuel econom...

• Use a known quality gasoline, preferably anational brand. • Use the same side of the same pump and havethe vehicle facing the same direction each timeyou fill up. • Have the vehicle loading and distribution thesame every time. Your results will be most accurate if your fillingmethod is consistent....

Driving style — good driving and fuel economyhabits Give consideration to the lists that follow and youmay be able to change a number of variables andimprove your fuel economy. Habits • Smooth, moderate operation can yield up to 10%savings in fuel. • Steady speeds without stopping will usually givet...

• Combine errands and minimize stop-and-godriving. Maintenance • Keep tires properly inflated and use onlyrecommended size. • Operating a vehicle with the wheels out ofalignment will reduce fuel economy. • Use recommended engine oil. Refer to Lubricant Specifications. • Perform all regularly schedul...

EPA window sticker Every new vehicle should have the EPA windowsticker. Contact your dealer if the window sticker isnot supplied with your vehicle. The EPA windowsticker should be your guide for the fuel economycomparisons with other vehicles. It is important to note the box in the lower leftcorner ...

Replacing headlamp bulbs Handle a halogen headlamp bulb carefullyand keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch theglass. The oil from your hand could cause the bulbto break the next time the headlamps areoperated. To remove the headlamp bulb: 1. Make sure...

To install the new bulb: 1. With the flat side ofthe new bulb’s plasticbase facing upward,insert the glass end ofthe bulb into the lampassembly. You mayneed to turn the bulb left or right to align thegrooves in the plastic base with the tabs in the lampassembly. When the grooves are aligned, push th...

5. Rotate the bulbsocketcounterclockwise about 1 ⁄ 4 turn and remove from lamp assembly. 6. Carefully pull thebulb straight out fromthe socket and push inthe new bulb. 7. To complete installation, follow the removalprocedure in reverse order. High-mount brakelamp bulbs 1. Open trunk. 2. Inside trunk...

1. Rotate the foglampbulb counterclockwiseand remove fromfoglamp (the rear sideof the foglamp isshown). 2. Disconnect theelectrical connectorfrom the foglamp bulb. 3. Connect the electrical connector to the newfoglamp bulb. 4. Install the foglamp bulb in foglamp by rotatingclockwise. Replacing licen...

Map lamps For bulb replacement, see a qualified servicetechnician or your dealer. Using the right bulbs Function Trade Number Tail lamp, brakelamp, turn lamp 3157K Park lamp, turn lamp, sidemarker (front) 3157NAK Backup lamp 3156K License plate lamp 168 High-mount brakelamp 906 Headlamps 9007 Luggag...

Vertical aim adjustment 1. Park the vehicle ona level surfaceapproximately 7.6meters (25 feet) froma vertical wall orscreen directly in frontof it. 2. Measure the heightfrom the center of yourheadlamp to theground and mark an2.4 meters (8 foot)horizontal reference line on the vertical wall orscreen ...

Washing your vehicle Wash your vehicleregularly with cold orlukewarm water. Neveruse strong detergentsor soap. If your vehicleis particularly dirty, usea quality car washdetergent. Always use aclean sponge, washingglove or similar device and plenty of water for bestresults. To avoid spots, avoid was...

If the wiper still does not wipe properly, this couldbe caused by substances on the windshield such astree sap and some hot wax treatments used bycommercial car washes. Clean the outside of thewindshield with a non-abrasive cleanser such as thenon-abrasive Bon-Ami t powder. Rinse thoroughly with cle...

Do not use household cleaning products,alcohol solutions, solvents or cleaners intendedfor rubber, vinyl or plastics. Cleaning and maintaining the safety belts Clean the safety belts with a mild soap solutionrecommended for cleaning upholstery or carpets. Donot bleach or dye the belts, because these...

MOTORCRAFT PART NUMBERS Component 3.8L OHV V6engine 4.6L SOHC V8engine Air filterelement FA-1611 FA-1634 Fuel filter FG-800A FG-800A Battery BXT-59 BXT-59 Oil filter FL-400S FL-820S PCV valve EV-152 EV-98 Spark plugs* AWSF-42EE** AWSF-32PP*** * Refer to Vehicle Emissions Control Information(VECI) de...

Fluid Ford PartName Application Capacity Trans-missionfluid MotorcraftMERCON t V ATF 3 Automaticwith 3.8LOHV V6engine 13.1L (13.9quarts) Automaticwith 4.6LSOHC V8engine 12.0L (12.8quarts) MotorcraftMERCON t ATF Manualwith 3.8LOHV V6engine 2.6L (5.6pints) Manualwith 4.6LSOHC V8engine 4 3.1L (6.6pints...

Item Ford partname Ford partnumber Fordspeci-fication Enginecoolant FordPremiumEngineCoolant E2FZ-19549-AA(in Oregon,F5FZ-19549-CC,in Canada,MotorcraftCXC-10) ESE-M97B44-A Engine oil Motorcraft5W-30SuperPremiumMotor Oil XO-5W30-QSP WSS-M2C153-Gwith APICertificationMark Lockcylinders Penetratingand L...

GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicleconcern, Ford offers a complimentary roadsideassistance program. This program is separate fromthe New Vehicle Limited Warranty. The service isavailable: • 24–hours, seven days a week • for the Basic warranty period (Canada) or ...

To receive roadside assistance in the United Statesfor Ford or Mercury vehicles, call 1-800-241-3673 orif you own a Lincoln vehicle, call 1–800–521–4140.In Canada call 1–800–665–2006. Should you need to arrange assistance for yourself,Ford will reimburse a reasonable amount. To obtaininformation abo...

general manager of the dealership. In most cases,your concern will be resolved at this level. Ford Motor Company and Ford of Canadadealerships also carry genuine Ford parts andaccessories, providing you with original equipmentreliability. Away from home If you are away from home when your vehicle ne...

If you still have a complaint involving a warrantydispute, you may wish to contact the DisputeSettlement Board (U.S.) or the Mediation/ArbitrationProgram (Canada). In the United States, a warranty dispute must besubmitted to the Dispute Settlement Board beforetaking action under the Magnuson-Moss Wa...

• sales disputes between customer and dealerexcept those associated with warranty repairs orconcerns with the vehicle’s performance asdesigned • a request for reimbursement of consequentialexpenses unless a service or product concernbeing reviewed • items not covered by the New Vehicle LimitedWarran...

What the Board needs To have your case reviewed you must complete theapplication in the DSB brochure and mail it to theaddress provided on the application form. Your application is reviewed and, if it is determinedto be eligible, you will receive an acknowledgmentindicating: • the file number assign...

If you are in another foreign country, contact thenearest Ford dealership. If the dealership employeescannot help you, they can direct you to the nearestFord affiliate office. If you buy your vehicle in North America and thenrelocate outside of the U.S. or Canada, register yourvehicle identification...

ORDERING ADDITIONAL OWNER’SLITERATURE To order the publications in this portfolio in theUnited States: Make checks payable to: HELM, INCORPORATEDP.O. Box 07150Detroit, Michigan 48207 For a free publication catalog, order toll free:1-800-782-4356 Monday-Friday 8:00 a.m. - 6:00 p.m. EST,for credit car...

REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that yourvehicle has a defectthat could cause acrash, or could causeinjury or death, youshould immediatelyinform the NationalHighway Traffic SafetyAdministration(NHTSA) in addition to notifying Ford MotorCompany. If NHTSA receives similar complaint...

Air bag supplementalrestraint system ........ 74 and childsafety seats ............. 76description .............. 74disposal .................... 79driver air bag .......... 77indicator light ...... 7,78operation ................. 77passenger air bag ... 77 Air cleaner filter ..... 182Air conditioni...

Traction control ........ 95 active light .............. 10 Traction-lokrear axle .................. 105Transmission automaticoperation ................. 97fluid, checkingand adding(automatic) ........... 146fluid, checking andadding (manual) ... 149fluid,refill capacities ...... 183lubricantspecifi...

Item Information Required fuel Unleaded fuel only -87 octane Fuel tank capacity 58.7L (15.5 gallons) Engine oil capacity(includes filter change) 4.7L (5.0 quarts). UseMotorcraft 5W30 SuperPremium Motor Oil,Ford specificationWSS-M2C153-G Tire size and pressure Refer to theCertification Label. Hood re...