Fluke DTX-NSM - Manual
Fluke DTX-NSM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Page 2; Software Requirements; Caution; Figure 1. Installation
- Page 3 – Page 3; Verifying Network Connectivity; Setting Up for the Connectivity Test; Select DHCP to have the network's server assign IP addresses.; Create then enter the Name and IP Address of a device you want
- Page 4 – Page 4; Running the Connectivity Test; Figure 2. Network Connectivity Results
- Page 5 – Page 5; Found Cable ID and the identifier's number appears.; Registration
- Page 6 – Page 6; LIMITED WARRANTY AND LIMITATION OF LIABILITY
DTX-NSM Instruction Sheet/English
Page 1
PN 2544310 (English) January 2006
2006 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
D T X - N S M
Network Service Module
G e t t i n g S t a r t e d G u i d e
The DTX-NSM Network Service Module lets you do the following:
•
Verify connection to the network, including connection speed, duplex
configuration, link wiring, and PoE service (wiring and PoE functions for
twisted pair only)
•
Ping IP addresses
•
Monitor network traffic for utilization, collisions, errors, and broadcast
packets
•
Blink a port's activity LED
•
Use Fluke Networks LinkRunner
Cable ID locators (optional) to identify link
connections at a patch panel (twisted pair only)
Note
Running network tests on a fiber link requires an optional SFP module.
Accessing the Product Manuals
This guide provides basic information to help you get started using the module.
For more detailed information, see the latest versions of the DTX Series Users
Manual and the DTX Series Technical Reference Handbook provided on the DTX
Product Manuals CD and on the Fluke Networks website.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DTX-NSM Instruction Sheet/English Page 2 Software Requirements The following software supports the DTX-NSM module. Software upgrades are available on the Fluke Networks website. • DTX software: version 1.3 or later • LinkWare software: version 2.5 or later Installing the DTX-NSM Module and Optional ...
DTX-NSM Instruction Sheet/English Page 3 Verifying Network Connectivity The network connectivity test tells you if a network jack is connected to the switch or hub. The test also provides details about the link's configuration and includes a ping function for verifying connectivity to stations on th...
DTX-NSM Instruction Sheet/English Page 4 Running the Connectivity Test 1 Connect to the network using a twisted pair or fiber patch cord. 2 Turn the rotary switch to MONITOR; then select Network Connectivity. 3 Press P . Figure 2 describes some of the features on the network connectivity results scr...
