Fluke DTX-NSM - Manuals

Fluke DTX-NSM – Manual in PDF format online.

Manuals:

Manual Fluke DTX-NSM

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Page 2; Software Requirements; Caution; Figure 1. Installation

DTX-NSM Instruction Sheet/English Page 2 Software Requirements The following software supports the DTX-NSM module. Software upgrades are available on the Fluke Networks website. • DTX software: version 1.3 or later • LinkWare software: version 2.5 or later Installing the DTX-NSM Module and Optional ...

Page 3 - Page 3; Verifying Network Connectivity; Setting Up for the Connectivity Test; Select DHCP to have the network's server assign IP addresses.; Create then enter the Name and IP Address of a device you want

DTX-NSM Instruction Sheet/English Page 3 Verifying Network Connectivity The network connectivity test tells you if a network jack is connected to the switch or hub. The test also provides details about the link's configuration and includes a ping function for verifying connectivity to stations on th...

Page 4 - Page 4; Running the Connectivity Test; Figure 2. Network Connectivity Results

DTX-NSM Instruction Sheet/English Page 4 Running the Connectivity Test 1 Connect to the network using a twisted pair or fiber patch cord. 2 Turn the rotary switch to MONITOR; then select Network Connectivity. 3 Press P . Figure 2 describes some of the features on the network connectivity results scr...

Fluke Manuals