Fisher-Price T4201 - Manual
Fisher-Price T4201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – alkaline; Consumer Information; To prevent serious injury or death:; WARNING
- Page 3 – Parts; Shown Actual Size; Assembly; The seat back tube is designed to fi t one way. If it does not; click; CAUTION; This package contains small parts
- Page 4 – Make sure you hear a “click” on; The back crossbar is designed to fi t the ends of the side rails; A lock nut has been factory assembled to the retainer. During
- Page 5 – • Fit the kickstand onto the assembly, as shown.; • Insert four screws into the kickstand and tighten.; • Fit the pad pocket onto the seat back tube.
- Page 6 – Battery Safety Information
- Page 7 – Setup and Use; Restraint System; • Place your child in the seat. Position the restraint pad between; Make sure you hear a “click” on both sides.; • Tighten each waist belt so that the restraint system is snug; Seat Position; • Fasten the straps on the back of the pad for the; Infant-Recline Position
- Page 8 – To tighten the belts:; Power Switch; Toy Bar
www.fi sher-price.co.uk
T4201
Toddler Rocker -
Upright Position
Infant Rocker Seat -
Recline Position
IMPORTANT!
KEEP FOR FUTURE
REFERENCE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 • Please read these instructions before assembly and use of this product. • Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). • Requires one "D" (LR20) alkaline battery (not included) for soother operation. • Product features and decorations may var...
3 Parts Seat Back Tube Toy Bar 2 Side Rails Back Crossbar 2 Retainers with Lock Nut Front Crossbar Pad IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. Kickstand Note: Tighten or loosen all screws with a Phillips screwdriver....
4 Back Crossbar Side Rails • While pressing the buttons on the ends of the back crossbar, insert into the ends of the side rails. Push the back crossbar until the buttons "click" into place. Make sure you hear a “click” on each side. Hint: The back crossbar is designed to fi t the ends of the...
