Fisher-Price N9326 - Manual

7 Charging the Battery (Inside the Receiver) DC Input Jack IMPORTANT! Fully charge the receiver (with battery pack inside) for four hours before fi rst-time use. Use only the included AC adaptor charger! Do not use any other adaptor charger.• Fit the AC adaptor charger pin into the DC input jack on t...

8 Testing Sound/Video Reception • Place the transmitter in the room where you intend to use it. • Point the transmitter toward the area you will be monitoring. Adjust the camera angle by rotating the top portion of the transmitter up or down. • Turn the power/volume dial ON. • Turn on a radio. Power...

10 Transmitter Wall Mount Installation To prevent strangulation with power cord, never place transmitter within reach of child. WARNING IMPORTANT! Test the reception of the monitor before installing the wall mount bracket and cord wrap . Use the assistance of one adult to hold the transmitter agains...

18 Setup/On Screen Displays Main Menu • First, turn both transmitter and receiver power ON. Then press the main power/menu select button on the receiver to see the main menu. • Press the up, down or side arrows to scroll through menu options. As you scroll, the menu choices highlight and blink on th...

19 Setup/On Screen Displays Sounds Turn sounds off Select nature sounds Select heartbeat sounds Return to previous menu Exit menu If you turn sounds ON one of the sound icons or will appear on the bottom of the screen. Music Turn music off Turn music on and cycle through all fi ve songs Select song n...

20 Setup/On Screen Displays Night Light Turn night light off Turn night light on Return to previous menu Exit menu If you turn the night light on the night light icon will appear on the bottom of the screen. Voice Activated (For Nighttime Use) Video screen turns on for 30 seconds and then turns off....

22 Setup/On Screen Displays Out of Range The out of range warning will fl ash on the screen and you will hear a tone when the receiver is out of range or the transmitter is turned off. Battery Indicators Indicates receiver is using battery power (only on the menu screen). Indicates battery power is l...

23 • Place the transmitter in the same room with child. Fit the transmitter into the tabletop base. Position the camera lens so it is facing child. For the best viewing range, the transmitter should be approximately fi ve feet away from baby. • Unwrap and fully extend the power cord for best transmis...

25 When the light in baby’s room is too low, the transmitter will automatically switch to night vision mode. The image on the receiver screen will appear in black and white, not color. Night Vision Mode

26 Battery Replacement If you need to replace your NiMH rechargeable battery pack, please contact Fisher-Price ® Consumer Relations at www.service.fi sher-price.com or call 1-800-432-5437 . • Locate the battery compartment door on the back of the receiver.• Loosen the screws in the battery compartmen...

29 FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful inter-ference in a residential installation. This eq...

31 Care • Excess dirt in transmitter microphone will hamper transmission of sound. Wipe all parts with a damp cloth. Do not immerse any part of this monitor. One (1) Year Limited Warranty (United States Only) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052 warrants to the original...