Fisher-Price L3891 - Manual

Page 2 - Prevent serious injury or death from falls; WARNING; Place the high chair on a level, stable surface; Consumer Information; Diimport & Diedarkan Oleh: Mattel SEA Ptd

Prevent serious injury or death from falls or sliding out: • Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitti...

Page 3 - Parts; Tighten or loosen all screws with a Phillips screwdriver.; Shown Actual Size

3 Parts Front Base Footrest Back Base Frames Hinge Rod Seat Bottom Tubes Pad Seat Bottom Seat Back Base Tray Food Tray Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Shown Actual Size #8 x 1,9 cm Screws - 8 #10 x , cm Black Screws - 7 Teether Toy

Page 4 - Assembly; • Slide a seat bottom tube through each set of plastic rings; Before assembly and each use, inspect this

Assembly 1 • Place the seat bottom face down on a flat surface.• At an angle, fit the footrest to the seat bottom, as shown. Seat Bottom Footrest • Slide a seat bottom tube through each set of plastic rings on the seat bottom. Plastic Rings Seat Bottom Tubes Plastic Rings IMPORTANT! Before assembly ...

Page 5 - black

Assembly • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. Tighten the screws. Insert Screws Here 6 Hinge • Turn the seat assembly face down.• Insert the hinge rod through the hinge on the seat back and seat bottom, as shown. • Insert a #10 x 2,2 cm black screw in...

Page 6 - The #10 x 2,2 cm black screws may have been

6 Assembly • Position a frame so that the decorated side is outward. • Insert the back frame legs into the back base. • Fit a screw retainer over a hole in the back base, as shown. • Insert a #10 x 2,2 cm black screw through the screw retainer and back base. Tighten the screw. • Repeat this procedur...

Page 7 - PRESS

7 Assembly • Fit the frame front legs onto the front base.• Fit a screw retainer over the hole in a front leg.• Insert a #10 x 2,2 cm black screw through the screw retainer and front leg. Tighten the screw. • Repeat this procedure to fasten the other end of the front base with the remaining screw re...

Page 8 - • Fit the pocket on the top of the pad onto the seat back.

8 Assembly • Remove both shoulder straps from the seat back.• Remove the crotch strap from the seat back. Shoulder Straps Crotch Strap 1 • Fit the pocket on the top of the pad onto the seat back. 16

Page 9 - Do not unbuckle the restraint system. It is easier to; crotch strap

9 Assembly • From behind the product, attach the end of the crotch strap to the peg. 0 Clips • Fit the clips on the front edge of the pad onto the seat bottom. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. 17 18 Shoulder Straps up Crotch Strap Down Lowest Slot Hint...

Page 10 - Smaller Baby; • Insert the ends of; lower; • From behind the product, attach the ends of the shoulder; Larger Baby; • From the front of; upper; slots in the pad and seat back.

10 Smaller Baby • Insert the ends of the shoulder straps through the lower slots in the pad. • From behind the product, attach the ends of the shoulder straps to the peg. Assembly Larger Baby • From the front of the product, insert the ends of the shoulder straps through the upper slots in the pad a...

Page 11 - Always use the restraint; Secure Child; To tighten the waist straps:

11 Prevent serious injury or death from falls or sliding out: Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. WARNING Secure Child 1 • Place your child in the seat....

Page 12 - To change strap slots:

1 • You can remove the shoulder straps and use only the waist restraint. • From behind the product, squeeze the restraint release tabs and remove the shoulder straps. • From the front of the product, pull to remove the shoulder straps from the seat back/pad. • Push to remove the shoulder straps from...

Page 13 - using the Trays; may contact food. The base tray is not dishwasher safe.

13 using the Trays Prevent serious injury or death from falls or sliding out: Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. WARNING 6 Tray Armrest • While pulling...

Page 14 - “snap”; To remove the toy, press the tab and lift the toy.; • Position the high chair away from steps,

1 • Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. The food tray is not microwave safe. Base Tray Food Tray 9 Toy Press • Insert and “snap” the toy tab into either slot in the tray. Hint: To remove the toy, press the tab ...

Page 15 - Adjusting the Seat; Adjust the seat angle to any of three positions:; To adjust the seat angle:; BACK VIEW; Adjust the seat height to any of seven positions!; To adjust the seat height:

1 Adjusting the Seat Prevent serious injury or death from falls or sliding out: • Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. • It is recommended that only chil...

Page 16 - Storage

• With the legs all the way open, lower the seat to position 7 the lowest position). • Pull the frame release latches forward and push the rear legs toward the front legs. Pull Frame Release Latch Storage 1 Care • The pad, frame, and base tray may be wiped clean using a mild cleaning solution and a ...

Fisher-Price L3891 - Manual

Table of Contents:

Summary

Other Fisher-Price Models