Fisher-Price 79415 - Manual

Page 2 - WARNING; • Use only a full size crib mattress at least 27; Message to Parents; in a serious injury or death from entrapment or strangulation.

WARNING • Use only a full size crib mattress at least 27 1 / 4 " (690 mm) by 51 5 / 8 " (1310 mm) by 5" (127 mm) thick. • Never place bed near windows where cords from blinds or drapes may strangle child.• Regularly inspect bed for damage. DO NOT use bed if any parts are missing or broke...

Page 3 - The assembly of the crimped mattress; INCORRECT; CAUTION; Please keep small parts and; Toddler Bed Assembly

• Check to be sure the crimped mattress tubes are inserted properly. • There is a metal tab on one side of the crimped end. Make sure the metal tab is not showing. • Pull up firmly on the crimped mattress tubes to besure they are securely in place. • If the crimped mattress tubes can be removed from...

Page 4 - The assembly of the crimped mattress tubes

Toddler Bed Assembly • Check to be sure the crimped mattress tubes are inserted properly. • There is a metal tab on one side of the crimped end. Make sure the metal tab is not showing. • Pull up firmly on the straight side rail to be sure themattress tubes are securely in place. • If the straight si...

Page 5 - If you are having difficulty securing the; inside

Toddler Bed Assembly • Stand the headboard assembly upright, as shown.• Push down on the top of the headboard to secure it to the right and left side panels. Helpful Hint: If you are having difficulty securing the headboard to the left and right side panels, position theassembly against a wall (with...

Page 6 - Toddler bed assembly is now complete.

Fish er-P rice ® • Fit the metal frame curved ends into the grooves in the footboard. Fish er-P rice ® • Insert four barrel nuts into the metal frame curved ends.• Insert four screws into the outside of the footboard and hand tighten the hardware. • While holding a barrel nut in place with a Phillip...

Page 7 - If you are having difficulty securing the desk; Desk Assembly

Converting the Toddler Bed to a Desk Fish er-P rice ® • The My Little Desk Bed TM easily disassembles to convert to a desk. • Remove the barrel nuts and screws (eight of each) from the left side panel, right side panel and footboard. • Remove the headboard, left and right side panels and foot- board...

Page 8 - When converting the desk back to a toddler; Desk assembly is now complete.; Limited Warranty

• Position the desk top so that the grooved side is toward the desk. • Fit the pegs on the desk into the grooves in the desk top. • Rotate the desk top down. Helpful Hint: When converting the desk back to a toddler bed, rotate the desk top upright and lift to remove it fromthe desk. Desk assembly is...

Fisher-Price 79415 - Manual

Table of Contents:

Summary

Other Fisher-Price Models