Fisher-Price 72639 - Manual
Fisher-Price 72639 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Parts; (ALL SHOWN ACTUAL SIZE; WARNING; , rather than return this product to the store.; This product contains small parts; CAUTION; Some parts
- Page 3 – • Slide a washer onto the straight axle.; Assembly; • Turn the frame on its side with the exposed end of; Gently pull the rear; • Set the frame assembly aside.; Bottom View
- Page 4 – • Place a scrap block of wood under the front
- Page 5 – Make sure the fork is positioned so that; You may need to rotate the handlebar to align; • At an angle, insert one peg on the back of the seat into
- Page 6 – Label Decoration; Right Side; Maintenance
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood (tools not included).
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-KIDS, rather than return this product to the store.
Age: 2 - 5 years.
Weight Limit: 55 lbs.
Instructions
Model Number: 72639
Free Spirit Trike
™
72639c-0920 9/28/01 1:41 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Parts #8 x 3" Screw – 1 #8 x 3 / 4 " Screw – 4 (ALL SHOWN ACTUAL SIZE ) Washer – 2 Cap Nut – 2 WARNING • Adult supervision is required.• Never use near steps, sloped driveways, hills, roadways, alleys, swimming poolsor other bodies of water. • Always wear shoes or sneakers.• Never allow more...
• Place a cap nut on a scrap block of wood.• Place one end of the straight axle into the cap nut.• Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to thestraight axle. • Slide a hubcap (peg side up) onto the straight axle.• Slide a rear wheel (indented side...
• Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal hub. Pedal Hub Pedal Axle Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of thefront wheel. Hole Pedal Axle Pedal Hubs Fro...
