Fisher & Paykel WD1001 - Manual
Fisher & Paykel WD1001 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – UNPACKING YOUR WASTE DISPOSAL; REMOVE OLD DISPOSER OR SINK WASTE REDUCER
- Page 5 – INSTALL THE SINK MOUNT FLANGE
- Page 9 – SAVE THESE INSTRUCTIONS; OPERATING INSTRUCTIONS; CAUTION
- Page 10 – SAFETY FEATURES; DISPOSER MAINTENANCE
- Page 11 – Express Warranty; This Warranty applies only to an
- Page 12 – FISHER & PAYKEL WASTE DISPOSAL INSTALLATION DIMENSIONS
- Page 13 – We want you to be a happy satisfied customer
Fisher & Paykel
Waste
Disposal
User’s Guide
(Models WD1001 and WD2002)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 4 - UNPACKING YOUR WASTE DISPOSAL Remove the waste disposal from the packing carton, being careful not to misplace any of the pieces. Inside the carton you should find the following: (ILLUSTRATION #2) 1. Sink Drain plug * 2. Sink Frange * 3. Sink Flange Rubber Gasket * 4. Sink Flange Fiber Gasket ...
- 5 - Then push the waste reducer up through the drain opening. (ILLUSTRATION #6) If the drain opening on your sink is covered with sealant, remove as much of the putty as possible from the rim of the sink drain hole. Unless you have a new home, be sure that the existing trap and drain lines are cle...
- 9 - SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS 1. Remove the sink drain plug 2. Turn on the cold water to a medium-high flow, allowing the water to flow into the waste disposer. 3. Turn on your waste disposer. 4. Put all food waste into the disposer while the disposer is operating and the wate...
