Page 5 - CONTENTS; SAVE THESE INSTRUCTIONS
1 CONTENTS IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website www.fisherpaykel.com or contact your l...
Page 6 - IMPORTANT SAFETY INSTRUCTIONS; SAFETY AND WARNINGS
2 IMPORTANT SAFETY INSTRUCTIONS WARNING! When using your dishwasher, follow basic precautions, including the following: ● Read all instructions before using the dishwasher. ● The information in this manual must be followed to minimise the risk of fire or explosion or to prevent property damage, pers...
Page 7 - FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
3 SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS Maintenance ● Disconnect the appliance from the power supply before any cleaning or maintenance. ● When disconnecting the appliance pull the plug rather than the power supply cord or junction of cord to avoid damage. ● Do not repair or replace any ...
Page 8 - To start a wash programme; To pause and restart a wash programme; CONTROLS AND STARTING A WASH
4 To start a wash programme 1 Press FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS DW60CE to turn the dishwasher on. 2 Check that the wash programme displayed is the one you would like to use. If not, press C2, C4 Dishwasher C6 Dishwasher to scroll through the wash programmes (see section ‘Changing...
Page 9 - SETTING DELAY START; To cancel Delay start
5 SETTING DELAY START This feature can delay the start of a wash programme by 1 to 12 hours. 1 Load the dishes, add detergent and close the door. 2 Press FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS DW60CE to turn the dishwasher on. 3 Check that the display shows the wash programme you require. I...
Page 10 - SETTING WASH MODIFIERS (; WASH PROGRAMME
6 SETTING WASH MODIFIERS ( DW60FC6 AND DW60UC6 MODELS ) Along with setting the wash programme, you may select one of the following the additional options: ● Extra dry : Increases the wash temperature and the length of the drying phase for improved drying performance. This is especially useful for pl...
Page 11 - Using sanitize; If sanitization has been successful:
7 SETTING WASH MODIFIERS ( DW60FC6 AND DW60UC6 MODELS ) Using sanitize The sanitize wash modifier adjusts the wash programme to meet the conditions requiredby Section 6, NSF 184 for sanitization to occur.While sanitize is running, the wash programme is monitored to ensure that theseconditions are me...
Page 12 - Half load Option; Heavy
8 SETTING A 1/2 LOAD ( DW60FC6 AND DW60UC6 MODELS ) Half load Option ● If you don’t have a full load of dishes to wash, you can choose to use the 1/2 load option. This may be useful if, for example, you only wish to wash the breakfast dishes. The dishes should fill only half the dishwasher, but may ...
Page 13 - USER PREFERENCE SETTINGS; To change the rinse aid setting; To turn the Beeps on or off; bPo
9 USER PREFERENCE SETTINGS These allow you to: ● Change the rinse aid setting or turn rinse aid on or off. ● Turn the beeps on or off. To change the rinse aid setting 1 Press FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS DW60CE to turn the dishwasher on. 2 Press and hold C2, C4 Dishwasher C6 Dishw...
Page 14 - CARING FOR YOUR DINNERWARE; grease or paint in your dishwasher.
10 CARING FOR YOUR DINNERWARE The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the dishwasher. Remember, if in any doubt about any aspect concerning items washed in the dishwasher, follow the instructions from the manufacturer of the ...
Page 15 - LOADING ADVICE; When loading your dishwasher
11 LOADING ADVICE When loading your dishwasher ● Place items so that water coming from the rotating spray arms below can reach all areas. Especially items on the foldaway cup racks. Wash performance will be reduced if it can’t. ● Ensure glass and other fragile items are stable, so that they do not a...
Page 17 - WATER HARDNESS AND DISHWASHING; What is water hardness?; If your home has hard water; to maintain the performance of your dishwasher.; If your home has naturally soft water or a water softener fitted
13 WATER HARDNESS AND DISHWASHING What is water hardness? Hard water is water with a high concentration of minerals such as calcium and magnesium. In soft water, this concentration is low. Water hardness varies by geographical location. How does water hardness affect dishwashing? ● Hard water can be...
Page 18 - WASH PROGRAMMES AND DETERGENT QUANTITIES; The indicator light will show which option has been selected.
14 WASH PROGRAMMES AND DETERGENT QUANTITIES ● The quantities in the table below are for powdered detergent and typical levels of soiling. If your home has softer or harder water, or to suit the particular load, you may need to adjust these quantities. ● If you are using tablets, follow the tablet ma...
Page 19 - ADDING DETERGENT; Only use detergents recommended for automatic dishwashers.; Press the button on the left of the dispenser.; Tablets should only be placed in the main wash (larger) compartment.; Remove any excess detergent from the edges of the dispenser.
15 ADDING DETERGENT IMPORTANT! ● Only use detergents recommended for automatic dishwashers. ● Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children and infirm persons away from the dishwasher when it is open....
Page 20 - USING RINSE AID; Press the button to snap the dispenser cover open.
16 USING RINSE AID We highly recommend using liquid rinse aid regularly to get the best drying results. Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition, it prevents metal from tarnishing. When to refill the rinse aid dispenser When rinse aid level becomes low,...
Page 21 - AFTER THE WASH; Holiday time
17 Rinse aid indicator (on control panel) AFTER THE WASH When the wash programme is over, the dishwasher will beep six times, then automatically turn off in a few seconds. 1 Open the door slightly and leave it ajar (about 100mm) to help the drying process. 2 Once the dishes are cool to touch, they c...
Page 22 - CARE AND CLEANING
18 CARE AND CLEANING Over time, food residue or limescale deposits may accumulate inside your dishwasher. These may reduce efficiency, and food residue may produce a bad odour. Inspect and clean your dishwasher regularly. IMPORTANT ! ● Before any cleaning or maintenance, always disconnect the dishwa...
Page 23 - Cleaning the dishwasher exterior; Rinse them thoroughly under running water and then replace.
19 CARE AND CLEANING Cleaning the dishwasher exterior ● To clean exterior surfaces of the dishwasher, wipe with a clean, soft damp cloth and dry with a clean, lint-free cloth. ● For non-flush surfaces wipe along or around the surface. For example, to wipe down the exterior control buttons, use a cir...
Page 24 - Cleaning the spray arms; Cleaning the upper spray arm/head
20 Cleaning the spray arms Limescale and food particles in the wash water can block the holes in the spray arms and the arm mountings. Clean these parts about once a month, or more often should the need arise. Cleaning the upper spray arm/head Do not remove the upper spray arm for cleaning. Clean wi...
Page 25 - FAULT CODES
21 FAULT CODES If the dishwasher malfunctions, it will display a fault code and beep. Check the following table below to see if you can correct the fault yourself. If the dishwasher still will not work, or shows any other fault code 1 Press FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS DW60CE to t...
Page 26 - FAULT; FCO
22 FAULT CODES FAULT CODES AND DESCRIPTIONS POSSIBLE CAUSES WHAT TO DO F30 Flooding Flood switch activated. Turn the dishwasher OFF and ON again. If fault persists, turn water off and disconnect the dishwasher from the power supply. Call Customer Care. F40 Water flow error. Switch dishwasher OFF and...
Page 27 - TROUBLESHOOTING; PROBLEM
23 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO Dishwasher will not start. No power. Ensure the dishwasher is plugged in and the power supply is turned on at the wall. The door is not properly closed. Close the door. Start/Pause button FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS DW60CE has ...
Page 30 - Water marks
26 PROBLEM POSSIBLE CAUSE WHAT TO DO Water marks left on glasses and cutlery. Rinse aid level or dosage setting is too low. Ensure there is rinse aid in dispenser. If necessary, increase the rinse aid setting or try using a wash programme with a higher temperature. See sections ‘Using rinse aid’ and...
Page 31 - Before you call for service or assistance; Your product is correctly installed.; WARRANTY AND SERVICE
27 Before you call for service or assistance Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance ...
Page 32 - WASH PROGRAMME DATA
28 AUTO NORMAL NORMAL ECO* FAST HEAVY RINSE S tages pre-wash pre-wash pre-wash pre-wash rinse 45°C main wash 45 – 68°C main wash 60°C DW60FC1: main wash 45°C DW60FC2, DW60UC2: main wash 44°C main wash 45°C main wash 68°C post-rinse post-rinse post-rinse post-rinse final rinse 70°C final rinse 70°C D...
