Fisher & Paykel DH9060P2 - User Manual

7 SAFETY AND WARNINGS z Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. z Do not overload your dryer beyond its rated capacity: MODEL MAXIMUM CAPACITY (KG) DH9060P2 9 DH9060PG2 9 *Capacity refers to the maximum dry weight ...

8 z Items that have previously been cleaned in, washed in, soaked in or spotted with flammable liquids or solids, eg petrol/gasoline, kerosene, dry cleaning solvents, vegetable or cooking oil, acetone, denatured alcohol, some brands of spot removers, turpentine, waxes and wax removers or other flamm...

9 !0 !2 !1 1 POWER Press to turn the dryer ON/OFF. 2 Keylock Press and hold to disable all buttons on the display panel, except POWER button. This prevents accidental button presses. 3 SmartTouch™ control dial Rotate to select your desired drying cycle. z The icon illuminates to indicate the selecte...

10 CONTROL PANEL Timed cycles When a timed cycle is selected the machine dries for the selected time regardless of the level of moisture in the load. It is important to check the items throughout the timed programmes to avoid over drying. Timed cycles include TIME DRY, RACK DRY and WOOL . Timed prog...

11 CONTROL PANEL 1 If a button is pressed while KEYLOCK is activated, the KEYLOCK button will flash. To turn your dryer on: Press POWER , then press and hold the KEYLOCK two seconds. This will activate the control panel. Dry cycles and options can now be selected. 1 Press for two seconds.When activa...

12 Your appliance can be connected to your home wireless network and operated remotely using the app. Getting started z Ensure your home WiFi network is turned on. z You will be given step by step guidance on both your appliance and mobile device. z It may take up to 15 minutes to connect your appli...

13 DRY CYCLES Your dryer has a number of dry cycles, selecting the most appropriate cycle for each load will help ensure you get the best drying result. CYCLE DESIGNED FOR MAX LOAD (KG) DEFAULT DRYNESS LEVEL* Everyday Auto sensing cycle for mixed loads. 9 Dry Cottons** Auto sensing cycle for cotton ...

14 DRY PREPARATION Sorting Sort your garments before placing them into the dryer. Sort into loads of similar items, and loads that will likely take similar times to dry. Heavier items (eg towels, and flannelette sheets) are best dried separately from lightweight items (eg synthetics, polyester-cotto...

16 DRY PREPARATION Drying rack There are many items that would benefit from being dried on a drying rack. For example items such as sport shoes, soft toys, hats and woollen items that may be damaged if they are tumbled. The drying rack is installed in your dryer when it leaves the factory.When you a...

17 GETTING STARTED QUICKLY Check the lint and condenser filters are clean and replaced correctly before every load. Ensure the water tank is empty or drain hose secure before using your dryer. Sort and load items into the dryer drum, ensuring no items are in the way of the door. Close the door (you ...

18 GETTING STARTED QUICKLY 4 If you wish to change a cycle or select a different option once a drying cycle has started, press then select the new cycle or option. Press to restart the dryer with the new cycle and/or settings. When the cycle finishes, your dryer will beep and then turn off automatic...

19 DRYING CYCLE OPTIONS When your dryer senses that the clothes have dried to the dryness level selected, the dryer will automatically finish the cycle.Two lights are used to show some dryness levels, eg to achieve the DAMP DRY setting both the DRY and the DAMP lights will be illuminated. There are ...

20 DRYING CYCLE OPTIONS Wrinkle Free To minimise wrinkling, select one of the WRINKLE FREE options. z ON provides wrinkle free operation for 1 hour. z EXTRA provides wrinkle free operation for 24 hours. 1 To stop the dryer at any point during the WRINKLE FREE stage of the cycle, press . You can then...

21 DRYING CYCLE OPTIONS Delay Start The DELAY START option can delay the start of the dry cycle between 15 minutes and 12 hours. Press MORE to increase the delay time, and LESS to decrease the time, or turn DELAY START off. Avoid using DELAY START for damp, non-colourfast items as this may cause dye...

22 CUSTOMISING A DRY CYCLE After using your dryer a few times you may discover there are some drying options you prefer for some cycles. You can programme your dryer to remember the drying options you prefer for each drying cycle. For instance, you may want to set the  EASY IRON cycle to a different...

23 CUSTOMISING A DRY CYCLE 5 Press once to save your customised cycle. A long beep will sound to confirm that your changes have been saved.Ensure the customised dry cycle option is saved before customizing any other options. Select your preferred setting for this option. Only a single dry cycle opti...

24 CARING FOR YOUR DRYER When you have finished using your dryer z Unplug the dryer from the power socket. z Wipe around the door to remove any remaining condensation and foreign matter. z Clear the lint and condenser filters and empty the water tank (if not set up to automatically drain). Cleaning ...

25 CARING FOR YOUR DRYER Open the dryer door.Remove the lint filter by pulling it up and out of the filter slot. 1 2 To clean the door lint filter: Open it out and wipe the surfaces clean with your hand or a soft cloth. Close the lint filter and place it back in the opening. Ensure the filter is fit...

26 CARING FOR YOUR DRYER To clean the condenser filter: Switch off the power supply and remove the power plug.Open the condenser filter cover. Turn the four condenser lock levers 90° then pull out the condenser filter. Use your hand, a cloth or a vacuum with a crevice nozzle to remove any lint build...

27 CARING FOR YOUR DRYER To clean the filter foam: Remove the bracket securing the foam to condenser filter. 1 Remove the foam and vacuum lint build-up with a crevice nozzle. 2 Replace the filter foam and secure with the bracket. 3 The condenser filter foam should be replaced regularly, three filter...

28 To clean the evaporator grid: With the condenser filter removed you will be able to see the evaporator grid. Cut Hazard. The surface of the evaporator has sharp edges and contact may result in injury. Handle with care when cleaning the grid and always keep blades away from fingers and body. If th...

29 Cleaning the sensors There are sensors in your dryer that detect whether the laundry is dry or not. These sensors need to be cleaned periodically (we recommend approximately four times a year). To clean the sensor: Open the door of your dryer. Allow the dryer to cool if drying has been carried ou...

30 Emptying the water collection tank During the drying cycle, steam condenses into water and is collected in the water tank, located at the top left of the dryer. It is important to empty the water tank after every load.If the water tank becomes full during operation, the dryer will pause, display ...

31 BEFORE YOU CALL FOR SERVICE User warnings Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous series of beeps and display a user prompt when it has a problem that you can correct yourself. To stop the beeps sounding, press any button on the control panel. ...

33 FAULT CODES When a continuous series of beeps sound, all the lights turn off on   the control panel and a number appears on the display, a fault has   occurred. The dryer will automatically enter this mode if a fault occurs. The word FAULT will be shown in the control panel display followed by a ...

34 TROUBLESHOOTING The following is a list of problems you may encounter when using this appliance and some suggestions that may help to correct the problem. If you still have problems, contact your Fisher & Paykel trained and supported service technician. PROBLEM POSSIBLE CAUSES WHAT TO DO Pres...

35 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Dryer is taking too long.Results were not satisfactory. Drying cycle selected not appropriate for the load. Select an appropriate cycle for the load. Refer to ‘Drying rack’. Dryness level selected not appropriate for the load. Select a higher dry...

36 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Dryer is not draining Drain hose not connected to the water tank. Ensure the drain hose is connected correctly. Refer to your installation guide for guidance on draining. Water tank not in place correctly. Ensure water tank is properly in place. ...

38 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Linting Lint filter not cleaned or replaced. Ensure the lint filter is cleaned after every cycle and replaced correctly. Refer to ‘Cleaning the filters’. Loads not sorted correctly. Dry lint-giving items separately from lint receivers. Also, dry ...

39 PROBLEM POSSIBLE CAUSES WHAT TO DO Tangling Loads not separated during loading. Try separating out larger items from smaller items. Items loaded into the dryer incorrectly. Load items individually into the dryer. Do not place folded items in the dryer. Incorrect cycle selection. Try using the EAS...

40 MANUFACTURER’S WARRANTY For New Zealand and Australia only. You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this heat pump clothes dryer covering parts and labour for servicing within the country of purchase. Fisher & Paykel undertakes to: Repair or, at its opt...

41 MANUFACTURER’S WARRANTY This product has been designed for use in a normal domestic (residential) environment. This product is not designed for commercial use (whatsoever). Any commercial use by a customer will affect this product’s Manufacturer’s Warranty.Service under this Manufacturer’s Warran...

42 CUSTOMER CARE Before you call for service or assistance Check the things you can do yourself. Refer to your User guide and check: 1 Your product is correctly installed. 2 You are familiar with its normal operation. 3 You have read the ‘Customising a dry cycle’ and ‘Troubleshooting’ sections. If a...

43 CUSTOMER CARE Registration Register your product with us so we can provide you with the best service possible. To register your product visit our website: fisherpaykel.com/register Complete and keep for safe reference: Model Serial No. Purchase Date Purchaser Dealer Suburb Town Country