Page 3 - Refer to your ‘Quick start guide’ for information on:
This user guide is an accompaniment to your ‘Quick start guide’ which is included with your dishwasher. For operating instructions, see your ‘Quick start guide’. If you no longer have your ‘Quick start guide’, you can download it from our local website, listed on the back cover. Refer to your ‘Quick...
Page 5 - Contents; SAVE THESE INSTRUCTIONS
1 Contents Electrical connection (GB IE only) 2 Safety and warnings 3 Caring for your dinnerware 7 Racking features 8 Loading suggestions 12 Water hardness and dishwashing 13 Wash programs and detergent quantities 14 Adding detergent 16 Using rinse aid 18 Water softener 19 User maintenance instructi...
Page 6 - For Great Britain only; Fuse replacement; For the Republic of Ireland; Electrical connection
2 For Great Britain only Important! This appliance must be earthed. Fuse replacement The mains lead of this appliance is fitted with aBS 1363A 13 A fused plug. To change a fuse inthis type of plug, use an ASTA approved fuse toBS 1362 type and proceed as follows: 1 Remove the fuse cover and fuse. 2 F...
Page 7 - Safety and warnings; IMPORTANT SAFETY INSTRUCTIONS
3 Safety and warnings Your dishwasher has been carefully designed to operate safely during normal dishwashing procedures. Please keep the following instructions in mind when you are using your dishwasher. IMPORTANT SAFETY INSTRUCTIONS WARNING! - When using your dishwasher, follow basic precautions, ...
Page 8 - Installation
4 Safety and warnings IMPORTANT SAFETY INSTRUCTIONS Installation This dishwasher must be installed and located in accordance with the Installation instructions before it is used. If you did not receive Installation instructions with your dishwasher, you can order them by calling your Authorised Repa...
Page 9 - Maintenance
5 Safety and warnings IMPORTANT SAFETY INSTRUCTIONS Maintenance Disconnect the appliance from the power supply before any cleaning or maintenance. When disconnecting the appliance pull the plug rather than the power supply cord or junction of cord to avoid damage. Do not repair or replace any part o...
Page 10 - Operational - models with remote control
6 Safety and warnings IMPORTANT SAFETY INSTRUCTIONS Operational - models with remote control To prevent unauthorized use, keep the remote control out of reach of children. Make sure that you keep the remote away from water and steam. Do not immerse and take care not to drop the remote control into w...
Page 11 - Caring for your dinnerware
7 Caring for your dinnerware The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the dishwasher. Remember, if in any doubt about any aspect concerning items washed in the dishwasher, follow the instructions from the manufacturer of the i...
Page 12 - Cutlery basket; Removable small items container; Racking features
8 Cutlery basket To reduce the risk of injury, we recommend loading knives and sharp utensils with handles facing up. Mix spoons, knives and forks within each section to stop cutlery nesting together and to ensure the water circulates freely. Keep stainless steel from touching silver cutlery to avoi...
Page 14 - Stemware notches; Glass supports
10 Racking features Racking features will vary depending on model. Stemware notches These notches help support long-stemmed glassware. Glass supports These clip on the rack wires to give your tall glasses extra stability. Spacing-adjustable tines (DD24/DD60 models only) Designed to fit deep bowls (w...
Page 15 - Adjustable racks
11 Racking features Adjustable racks You can adjust these independently of each other to any height: 1 Fold up to unlock the rack. 2 Adjust the height to suit by sliding up or down. 3 Fold down to lock in position. Fold the racks away if you need the space. Folding tines For optimum stability, place...
Page 16 - Loading suggestions; When loading your drawer, make sure that
12 Loading suggestions When loading your drawer, make sure that you place items so that water coming from the rotating spray arms below can reach all areas (wash performance will be reduced if it can’t) nothing blocks the water from getting to items on the adjustable racks glass and other fragile it...
Page 17 - Water hardness and dishwashing; What is water hardness?; If your home has naturally soft or softened water...
13 Water hardness and dishwashing What is water hardness? Hard water is water with a high concentration of minerals such as calcium and magnesium. In soft water, this concentration is low. Water hardness varies by geographical location. How does water hardness affect dishwashing? Hard water can be d...
Page 18 - Wash programs and detergent quantities; US CA
14 DD24/DD60 models Find out about water hardness in your home, then use the table below to determine how much detergent to use for each wash program. See also section ‘Water hardness and dishwashing’. For information on which program to use for your load, see your ‘Quick start guide’. The detergent...
Page 20 - Suitable detergents and where to place them; Adding detergent; Solid dishwasher tablets; Filling the detergent dispenser
16 Suitable detergents and where to place them Note: You may see other, equally suitable types of dishwasher detergent on the shelves ofyour supermarket. Read and follow the detergent manufacturer’s recommendations. Adding detergent Detergent dispenser Powdered dishwasher detergent pour into deterge...
Page 21 - Notes on using tablets
17 Unsuitable detergents These types of detergent are not suitable and may damage your dishwasher or lead to a service call that is not covered by warranty. Important! Do not use these in your dishwasher! Liquid detergents Laundry detergents Hand washing liquids Soaps Disinfectants How much detergen...
Page 22 - Using rinse aid; When to refill rinse aid
18 Using rinse aid We recommend using liquid rinse aid regularly to give the best drying results. Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. It also prevents metal from tarnishing. The rinse aid dispenser is on the inside of the drawer, underneath the detergent dispe...
Page 23 - Setting up the water softener; Determine the water hardness in your local area; Water softener
19 Setting up the water softener Important! Only some models (those with a letter ‘H’ in the model name) have a built-in water softener. Models with water softener are not currently available in New Zealand and Australia. Determine the water hardness in your local area Your local water company will ...
Page 24 - How to fill the salt reservoir
20 Water softener Notes: If your water hardness is above 625ppm/36 gpg, we highly recommend you completely fill the detergent dispenser for all programs except Rinse and the rinse aid setting should be at 5. If your water hardness is above 625ppm/36 gpg, the wash performance of your dishwasher will ...
Page 25 - The salt reservoir
21 Water softener Important! The water softener must always be filled with granular salt made especially for dishwasher watersoftening systems. We do not recommend the use of cooking salt like table salt, rock salt orpellets as they may contain impurities that will impair or diminish the life of the...
Page 26 - User maintenance instructions -; Holiday time; Cleaning the drain filter, spray arm and filter plate
22 User maintenance instructions - DD24/DD60 models Important! Disconnect the dishwasher from the power supply (unplug or switch off at the circuit breaker) and allow all its parts to cool before any cleaning or maintenance. Holiday time If the dishwasher is not going to be used for some time, we re...
Page 27 - Cleaning the drain filter
23 User maintenance instructions - DD24/DD60 models Important ! If a dishwasher cleaner/descaler is used, you must run a wash program with detergent immediately afterward to prevent any damage to your dishwasher. The dishwasher must be used with the filter plate, drain filter and spray arm correctly...
Page 28 - Cleaning the spray arm and filter plate
24 User maintenance instructions - DD24/DD60 models Cleaning the spray arm and filter plate To remove and clean the spray arm and filter plate 1 Unplug the dishwasher or turn it off at the power supply. 2 Unclip the glass supports (if fitted) from the rack wires and fold all the adjustable racks awa...
Page 32 - Cleaning the spray arms and filter plate
28 User maintenance instructions - DD36/DD90 models Cleaning the spray arms and filter plate Ensure the dishwasher is cool before you start cleaning. To remove the base rack and spray arms 1 Unplug the dishwasher or turn it off at the power supply. 2 Take out the cutlery basket. 3 Unclip the glass s...
Page 33 - Be careful that you don’t force them too
29 To replace the spray arms and base rack 9 Clip the spray arms back onto their mounting valves. Be careful that you don’t force them too hard and apply too much pressure on the wash pump housing. You should hear them click into place. Rotate them with your hand to check that they are located prope...
Page 34 - Troubleshooting
30 Troubleshooting Problem Possible cause What to do Unclean dishes Wash program unsuitable for the load. See your ‘Quick start guide’ for a suitable wash program, or the soils were too heavily baked on and dishes may need soaking. Spray arm unable to rotate. Ensure no items are obstructing the spra...
Page 35 - Problem
31 Troubleshooting Problem Possible cause What to do Drawer will not open (no beeping, no wash underway) Childlock feature is on or the ‘Closed drawer autolock’ option is on, or both. Turn the Childlock off. Hold down the / button until the symbol disappears from the display or the light above the /...
Page 37 - If there is a fault; How do I know if there is a fault?; Classic models
33 If there is a fault How do I know if there is a fault? Your dishwasher will self‐diagnose and let you know by beeping continuously and showing a fault code on the wash program panel inside the drawer (all models) and in the display (Classic models only) . What should I do if there is a fault? Che...
Page 38 - How to attend to a fault ‐ Classic models; START HERE
34 How to attend to a fault ‐ Classic models START HERE Press to stop the beeping. Look up the fault code in the table opposite and note it down. U1 : Turn on the water supply, then press to resume the wash program. Press . Wait a few seconds, then press again. Press . Another number will briefly ap...
Page 39 - E C
35 How to attend to a fault ‐ Classic models Display Fault Code Possible cause of fault U 1 U1 No water – the water supply hasn’t beenturned on. U 4 U4 Fault in the other drawer preventing the use of this drawer. U 6 U6 The spray arm has loosened or come off its mounting, or water pressure is too lo...
Page 40 - How to attend to a fault ‐ Designer models
36 START HERE Press to stop the beeping. Try to open the drawer (without using excessive force). U1 : Turn on the water supply, then press to resume the wash program. Check which program indicators are lit on the wash program panel. Look up what fault code the indicators correspond to in the table o...
Page 42 - How to attend to a fault ‐ Integrated models with badge
38 START HERE Press to stop the beeping. Try to open the drawer (without using excessive force). U1 : Turn on the water supply, then press to resume the wash program. Check which program indicators are lit on the wash program panel. Look up what fault code the indicators correspond to in the table o...
Page 44 - How to attend to a fault ‐; YES; YES
40 START HERE Try to open the drawer(without using excessive force). Press on the wash program panel to stop the beeping, then follow the applicable instructions below. Press and hold until you hear a quick double beep. Do the fault code indicators and beeping come back in a few seconds? Check which...
Page 46 - Warranty and service; Fisher & Paykel Appliances; Model no; Date of purchase
42 Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the ‘Installation instructions’, ‘User guide’ and ‘Quick start guide’ and check that: 1 your product is correctly installed 2 you are familiar with its normal operation. If after chec...
Page 49 - NEW ZEALAND & AUSTRALIA - Integrated single models
45 Wash program data- DD24/DD60 models NEW ZEALAND & AUSTRALIA - Classic, Designer, and Integrated double models HEAVY (~124 mins) NORMAL (~128 mins) FAST (~49 mins) DELICATE (~92 mins) RINSE (~11 mins) pre-wash main wash 70 o C main wash 60 o C main wash 55 o C main wash 50 o C post-rinse x2 po...
Page 50 - GREAT BRITAIN AND IRELAND
46 Wash program data - DD24/DD60 models GREAT BRITAIN AND IRELAND HEAVY (~126 mins) NORMAL (~95 mins) FAST (~53 mins) DELICATE (~92 mins) RINSE (~11 mins) pre-wash main wash 70 o C main wash 65 o C main wash 55 o C main wash 50 o C post-rinse x2 post-rinse x2 post-rinse post-rinse x2 final rinse 65 ...
Page 57 - Rinse agent setting
53 Cutlery basket Standards test - DD36 models (USA & CANADA) The dishwashers are tested to various standards for wash performance using the parameters detailed below. Wash program Normal Eco (At the end of the program, open the drawer 2” (50 mm) to improve the dry performance.) Rinse agent sett...
