Extron VSC 500 - Manual

Product Category

68-633-50 Rev. A

03 11

CAUTION:

Installation and service must be performed by authorized
personnel only. These units must be installed in accordance
with national and local electrical codes.

To install the VSC 500/700/700D, follow these steps. For detailed instructions
see the VSC 500/700/700D User Guide.

Step 1

Disconnect all power from the VSC and any input or output devices.

If the scan converter is to be set on top of a table top or other furniture,
install the self-adhesive feet on the bottom corners of the VSC. If the VSC
is to be rack mounted, mount the scan converter in a rack (see “Mounting
the VSC” in the VSC 500/700/700D User Guide).

Step 2

Attach an input device and a loop-through device to the rear panel

of the VSC 500.

RGB

input

(VGA)

connector

Buffered loop-through (VGA) connector

Attach an input device and a loop-through device to the

RGBHV

RGBS

R

G

B

V

H

/HV

R

G

B

V

H

/HV

VSC 700
VSC 700D

RGsB

R

G

B

H/HV

V

rear panel of the VSC 700/700D.

RGB input connectors and buffered loop-through connectors

Step 3

Attach an RGB or component video output device to the rear panel BNC connectors.

Step 4

Attach an S-video device to the S-video mini DIN connector
and an SDI device (700D only) to the SDI BNC connector.

Step 5

Plug the VSC, and input and output devices into a grounded AC source,
and turn on the input and output devices.

Step 6

Use the LCD menu screens or RS-232 programming to configure the VSC (in the VSC 500/700/700D User Guide

,

see the

“Installation and Operation” and the “RS-232 Programmer’s Guide” sections).

Step 7

Use the front panel Adjust horizontal (

[

) and Adjust vertical (

{

) adjustment knobs to center the image, then press the Size

button and rotate the knobs to fill the display screen (see “Front Panel Features” in the VSC 500/700/700D User Guide).

Step 8

Use the front panel Menu and Next buttons to navigate to the Filters menu. Using the front panel Adjust horizontal (

[

)

or Adjust vertical (

{

) adjustment knobs, adjust the flicker level from the Flicker filter submenu and adjust the detail level

from the Horizontal filter submenu (see “Filters menu (Filters)” in the VSC 500/700/700D User Guide).

VSC 500/700/700D • Setup Guide

Videoconferencing

System

VCR

RS-232
Control

B/B

-Y

G/Y

R/R

-Y

RG

B IN

PU

T

BU

FF

ER

ED

LO

OP

-TH

RO

UG

H

VID

H

V

S-V

IDE

O

RS

-23

2

/422

50/

60

Hz

100

-24

0V

0.3

A

OU

TP

UT

S

INP

UT

S

Extron
VSC 500

Scan Converter

PC

Extron
VSC Remote

Infrared Remote

Extron

USA - West

Headquarters

+

800.633.9876

Inside USA/Canada Only

+1.714.491.1500
+1.714.491.1517

FAX

Extron

USA - East

+800.633.9876

Inside USA/Canada Only

+1.919.863.1794
+1.919.863.1797

FAX

Extron

Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040
+31.33.453.4050

FAX

Extron

Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400
+65.6383.4664

FAX

Extron

Japan

+81.3.3511.7655
+81.3.3511.7656

FAX

Extron

China

+400.883.1568

Inside China Only

+86.21.3760.1568
+86.21.3760.1566

FAX

Extron

Middle East

+971.4.2991800
+971.4.2991880

FAX

©

2011 Extron Electronics All rights reserved.

www.extron.com

RGBHV

B/B-Y

G/Y

R/R-Y

H

V

OUTPUTS

RGBS

B/B-Y

G/Y

R/R-Y

H

OUTPUTS

B/B-Y

G/Y

R/R-Y

V

H

RGsB

V

B/B-Y

G/Y

R/R-Y

V

H

R-Y, Y, B-Y

SDI

S-VIDEO

RGB INPUT

BUFFERED

LOOP-THROUGH

INPUTS

VSC 500