Extech EA80 - Manual
Extech EA80 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Three Tier LCD Display; AC Adaptor Phono Plug
- Page 3 – Preparation for Use; Operation; Taking Measurements
- Page 4 – Humidity Measurement; Temperature Measurement; Dew Point Temperature Measurement
- Page 8 – Calibration; CO2 Calibration
- Page 9 – Specifications; CO2 Specifications
- Page 10 – Maintenance; Cleaning; Battery ordinance; disposal in the household garbage is prohibited!; PC Interface, Software Installation and Operation; Copyright
User Guide
Indoor Air Quality Meter/Datalogger
Model EA80
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EA80-EU-EN v3.2 08/13 2 Ø 2.5 Introduction Congratulations on your purchase of the Extech EA80 Indoor Air Quality Meter. This meter measures Carbon Dioxide (CO 2 , ppm) levels, ambient Temperature and Relative Humidity (%RH). 20,000 readings can be logged by the meter and later transferred to a PC. ...
EA80-EU-EN v3.2 08/13 3 Preparation for Use Power Supply The meter is powered by six (6) 1.5V ‘AAA’ alkaline batteries or by an AC adapter. Installing the Batteries Insert six (6) AAA batteries as indicated by the diagram located on the inside of the battery compartment. When the battery voltage dro...
EA80-EU-EN v3.2 08/13 4 Humidity Measurement 1. Press the “ ” button to power the meter ON. 2. The display will indicate the humidity reading (% RH) directly on the third display. 3. Hold the probe in the air in the area to be tested. Do NOT immerse in liquid. 4. Allow adequate time for readings to ...
