Extech 480846 - Manual
Extech 480846 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information
- Page 3 – Introduction; to 8GHz; 0MHz to 8 GHz Frequency range.; Fundamentals; Where the nature of the electromagnetic field is unknown.; The characteristic of electromagnetic fields :
- Page 4 – Description; Front Panel Description; key
- Page 5 – LCD display description
- Page 6 – Operation; Explanatory notes; Units of measurement; The digital display shows the highest instantaneous value
- Page 7 – Setting the units of measurement; Press the UNIT key to step through the units display.; Setting the result mode; AVG
- Page 8 – TIME ALARM; SET
- Page 9 – Setting the alarm function on or off; ALARM; Setting the audible sound function off; READ
- Page 10 – Making measurements; Hold the meter steady during the measurement.; Short-term measurements; Hold the meter at arm’s length.; Long-term exposure measurements; values are fluctuating greatly.; Alarm function
- Page 11 – Data memory; key, the display shows “
- Page 12 – Deleting stored values; Setting Current Data and Time
- Page 14 – Battery Installation and Replacement; Battery Installation; Specifications; General Specifications
- Page 15 – Electrical Specifications; Ambient temperature:; Isotropy deviation; Typically; Overload limit; Copyright
User's Guide
RF EMF Strength Meter
Model 480846
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
480846-en-EU_V4.3 09/14 2 Safety Information CAUTION Before making a measurement, check if the low battery symbol ( + ) is shown on the display when the meter is switched on. Replace the battery if the symbol is displayed. In the case of prolonged storage, it is preferable to remove the battery ...
480846-en-EU_V4.3 09/14 3 Introduction This meter is a broadband device for monitoring high-frequency radiation in the range of 10MHz to 8GHz . The non-directional electric field and high sensitivity also allow measurements of electric field strength in TEM cells and absorber rooms. The unit of meas...
480846-en-EU_V4.3 09/14 4 Description Front Panel Description (1). E-field sensor. (2). LCD display. (3). MAX/AVG Press this key to scroll through the following: “Instantaneous” “Max. instantaneous” “Average” “Max. average”. (4) key : Press this key to turn the meter on or off. (5). UNIT P...