Evolution R255SMSDB+ - User Manual

Evolution R255SMSDB+

Evolution R255SMSDB+ Miter Saw – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
Page: / 42

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; Introduction
  • Page 6 – SAFETY LABELS & SYMBOLS; Symbol; Hz; FOR ALL DOUBLE-INSULATED TOOLS; INTENDED USE OF THIS POWER TOOL; WHEN FITTED WITH A CORRECT BLADE THIS; PROHIBITED USE OF THIS
  • Page 8 – MITRE SAW SPECIFIC SAFETY
  • Page 10 – Do not
  • Page 11 – PERFORM CUTS; READ
  • Page 13 – ADDITIONAL ACCESSORIES; Description; TCT Blade
  • Page 14 – ITEMS SUPPLIED; These items can be found in the box.
  • Page 15 – MACHINE OVERVIEW
  • Page 18 – CLICK
  • Page 24 – ASSEMBLY AND PREPARATION; WARNING: Always disconnect the saw; TOOLS NEEDED; WARNING: Do not under any circumstances; KNOW THE PARTS
  • Page 30 – LASER SAFETY
  • Page 31 – LASER ADJUSTMENT; WARNING: At no time during this procedure; LASER RADIATION AVOID DIRECT EYE CONTACT; PERMANENTLY MOUNTING THE
  • Page 32 – THE HOLD DOWN CLAMP; Using a Standard Hold Down Clamp (Included; To use the Quick Release Mechanism:
  • Page 35 – To tilt the cutting head:; CROWN MOULDING CUTTING
  • Page 37 – TENSIONING THE DRIVE BELT; WARNING: Under no circumstances should; REPLACING THE DRIVE BELT
  • Page 38 – Assembly
  • Page 39 – EC DECLARATION OF CONFORMITY
  • Page 40 – Notes
  • Page 42 – USA
Loading the manual

Originally written in UK English

Date Published: 12/11/2018

Original Instructions
Originalbetriebsanleitung
Instructions Originales
Instrucciones Originales
Oryginalna Instrukcja

Instruções Originais
Instrucțiuni Iniţiale
Оригинальные Инструкции
Orijinal Talimatlar
Notice Originale

GB2438285

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; Introduction

TABLE OF CONTENTS Introduction 3 Warranty 3 Machine Specifications 4 Safety Labels & Symbols 6 Intended Use Of This Power Tool 6 Prohibited Use Of This Power Tool 6 Safety Precautions 6 Electrical Safety 6 Outdoor Use 7 General Power Tool Safety Instructions 7 Specific Safety Instructions 8 Blad...

Page 6 - SAFETY LABELS & SYMBOLS; Symbol; Hz; FOR ALL DOUBLE-INSULATED TOOLS; INTENDED USE OF THIS POWER TOOL; WHEN FITTED WITH A CORRECT BLADE THIS; PROHIBITED USE OF THIS

(1.8) SAFETY LABELS & SYMBOLS WARNING: Do not operate this machine if warning and/or instruction labels are missing or damaged. Contact Evolution Power Tools for replacement labels. Note: All or some of the following symbols may appear in the manual or on the product. Symbol Description V Volts ...

Page 8 - MITRE SAW SPECIFIC SAFETY

as dust masks, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and or battery pack, picking up or carrying the tool. Carr...

Other Evolution Miter Saws Models