Page 2 - Operation Instruction
2 E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N P/N: 4605XZ0610004AR Operation Instruction 2010 EverFocus Electronics Corp Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was c...
Page 3 - Precautions
3 Precautions 1. Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image. 2. Never disassemble t...
Page 4 - WEE
4 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in...
Page 5 - Table of Contents
5 Table of Contents 1 Product Overview.............................................................................................................................................. 7 1.1 Features ...........................................................................................................
Page 7 - PRODUCT OVERVIEW; Features; Chapter
7 1 PRODUCT OVERVIEW Amazing color low light sensitivity of 0.05 lux before the added benefits of advanced DSP technology, delivered by a 1/3” Sony Super HAD II sensor, is just the beginning with the new EverFocus EZ610/630. Get color without compromise: 560TVL resolution, your choice of full motion...
Page 8 - Accessory Parts List
8 • IP66 weather resistant • Dual voltage (12VDC/24VAC) with line lock to AC supply 1.2 Accessory Parts List Please be careful when you unpack the box and the electronic device inside. Check and make sure that you have all the items listed below inside the original box: • Camera Unit x 1 • Speedy Mo...
Page 9 - Specifications
9 1.3 Specifications Model EZ610 EZ630 Pickup Device 1/3" SONY Super HAD II CCD Video Format NTSC, PAL (by model) Picture Elements 768 x 494(NTSC)/ 752 x 582 (PAL) Horizontal Resolution 560 TVL Sensitivity 0.05Lux/F=1.2 (AGC ON); 0.0002Lux/F=1.2 (Sens-up 256x) 0.05Lux/F=1.2 (AGC ON); 0.0002Lux/F...
Page 10 - Dimensions
10 Weight 1250 g / 2.275 lbs. Mounting Pattern Speedy-Mount Ring mates with 4” round electrical box; base swivel is 1” NPT – remove base plate for coupling to standard conduit fittings. Certifications CE / FCC 1.4 Dimensions Front view Camera Body
Page 11 - Camera Component Description
11 1.5 Camera Component Description 1) Reset: To load the factory default configuration press the button, which is inside this hole, for 3 seconds. Please gently insert a thin, non-metallic device into the hole to operate the reset button. 2) Control Key: For setting Lens & OSD menu. Press the m...
Page 12 - Related Products
12 1.6 Related Products In addition, you may order the following EverFocus products which are recommended for use with the camera to achieve the best performance: • EverFocus control keyboard (EKB500) • Any EverFocus DVR with RS-485 interface for PTZ control
Page 13 - INSTALLATION; Wiring and Mounting
13 2 INSTALLATION This chapter will describe, in general terms, how to install the EZ610/630 camera. STEPS: 1. Wire and mount the camera. See 2.1 2. Adjust the camera position. See 2.2 Warning To prevent electrical shock, turn off the electrical power before making electrical connections. 2.1 Wiring...
Page 15 - Adjust Camera Position
15 2.2 Adjust Camera Position Adjust the viewing angle to the desired direction. With this unique 3-axis positioning system, installers can capture images from virtually any angle, without compromising. The camera can be adjusted in 3 ways. 1st axis 2nd axis Use a hexagon key to loosen this screw to...
Page 18 - OSD MENU SETUP; Control Key General Operation Guide
18 3 OSD MENU SETUP This chapter introduces how to change RS485 ID and Baud Rate and to configure the camera OSD menu. STEPS If you want to connect to the camera with a keyboard or other RS-485 - controller, please refer to Section 3.2 RS485 ID & Baud Rate setting. Otherwise, please go to STEP 2...
Page 19 - RS485 ID & Baud Rate Setting
19 NOTE: For those selected items with “ ” sign in the end, there is a sub-menu for further settings. Return to Previous Page Go to “Return” by turning the mini-joystick and press the mini-joystick to return to previous page. Close the Host Menu Screen To close the menu screen, navigate to the “EXIT...
Page 20 - OSD Menu Setup; OSD Menu Tree
20 3.3 OSD Menu Setup 3.3.1 OSD Menu Tree Default settings are shown bold or in brackets. Lens — DC — Brightness 0~100 (50) Exposure — Shutter — x256, x128, x64, x32, x16, x8, x4, x2, 1/60(NTSC) / 1/50 (PAL) , FLK,1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000 — AGC — HIGH ; MIDDLE ; LOW ; OFF — SENS...
Page 21 - LENS
21 — Motion — Off — On — Area Select — Area1-Area4 — Area Display — Off, On — Left/Right — 5~66 — Width — 0~93 — Top/Bottom — 1~60 — Height — 0~60 — Sensitivity — 0~40 — Motion View — Off, On — Return — Privacy — Off — On — Area Select — Area1-Area4 — Area Display — Off, On — Left/Right — 6~98 — Wid...
Page 22 - EXPOSURE
22 3.3.3 EXPOSURE 3.3.3.1 SHUTTER 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “EXPOSURE” -> “SHUTTER” by using the UP and DOWN buttons. 2. Select the shutter mode by pressing the LEFT or RIGHT button. Select from x256, x128, x64, x32, x16, x8, x4, x2, 1/...
Page 24 - WHITE BALANCE CONTROL
24 TOP/BOTTOM Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value adjustable is 0~6. HEIGHT Set the height of an area for the HSBLC to be adjusted. The value adjustable is 0~6. RETURN Press “RET” to save all settings in the HSBLC menu and return to the previous menu. Press “EN...
Page 25 - DAY NIGHT
25 MANUAL The manual adjustment mode enables a more precise adjustment. Please select ATW or AWC first. Then change to manual adjustment mode and press the SETUP button. Set the suitable color temperature, and increase or decrease the red and blue color values at the same time while checking the col...
Page 26 - DNR; SPECIAL
26 EXT The picture will switch automatically to color in a normal environment and to B/W when the ambient illumination is low based on the illumination reaching the light sensor at the front of the camera body. (default for EZ630) 3.3.6 3DNR 3DNR reduces the background noise in a low luminance envir...
Page 29 - ADJUST
29 SELECT mode. AREA DISPLAY Select “ON” to use the area selected in the AREA SELECT. Select “OFF” to disable this function. LEFT/RIGHT Set the coordinate of the horizontal axis 6~98. WIDTH Set the size of horizontal area 0~93. TOP/BOTTOM Set the coordinate of the vertical axis 0~60. HEIGHT Set the ...
Page 30 - RESET
30 3.3.8.3 RED Adjust image’s red level. The available range of level is 0~100. Press “RET” to saves all settings in the ADJUST menu and returns to the previous menu. Press “END” to save all the menu settings and exit. 3.3.9 RESET 3.3.9.1 FACTORY RESET Reset to the factory default settings. Press “R...
Page 31 - RS-485 REMOTE CONTROL; Remote control with EKB-500 keyboard; OSD Menu Setting by Keyboard
31 4 RS-485 REMOTE CONTROL 4.1 Remote control with EKB-500 keyboard 4.1.1 RS - 485 Wiring For more details about RS-485 wiring please consult related chapters in EKB-500 user manual. Note! Before being able to control keyboard, make sure Keyboard RS485 camera ID, Baud rate match the camera. (see COM...
Page 32 - Lens Adjustment by Keyboard; Remote Control with EverFocus DVR; Camera Operation and Setup by DVR
32 d. Move the joystick RIGHT ( ) and LEFT ( ) to adjust the mode and parameters of the selected item. Press “Menu” to leave and goes to previous menu after setting. Move to “exit” and press “menu” button when you finish all settings. For detail setting of each setup function, Please refer to “3.3. ...
Page 33 - EverFocus Electronics Corp.
33 EverFocus Electronics Corp. Headquarters Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,Technology Trade Building. Shangdi Information Industry Base, Haidian District,Beijing China Tel: +86-10-62971096 Fax: +86-1...