Page 2 - Product Name: EVS200A/AW EverFocus IP Video Encoder
EVS200A/AW 2 Product Name: EVS200A/AW EverFocus IP Video Encoder Model Number(s): EVS200A/AW FCC Notice "Declaration of Conformity Information" RF Declaration should be added. Please check Safety team. This equipment has been tested and found to comply with the limits for a Class A digital d...
Page 4 - Terms and Trademark
EVS200A/AW 4 remove, use a mild detergent and wipe gently. Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within 0 ℃ ~...
Page 5 - TABLE OF CONTENTS
EVS200A/AW 5 TABLE OF CONTENTS 1. INTRODUCTION.................................................................................................... 6 2. FEATURES .............................................................................................................. 6 3. ACCESSING THE CAMERA ME...
Page 7 - ACCESSING THE CAMERA MENU; ” and
EVS200A/AW 7 3. ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Location/Address field of your Internet Explorer browser. (Please refer to EVS200A/AW Installation Guide for how to find the IP address) Step 3. Input “...
Page 10 - – Navigation Mode; PTZ Control
EVS200A/AW 10 12. PTZ Control – Navigation Mode Select this to browse in direction user pointing at. 13. PTZ Control – Click-n-Go Mode Select this and system will center the pointing location for browsing. Before Click-n-Go mode After Click-n-Go mode EVS200A/AW provides 3 methods to control PTZ: 1. ...
Page 11 - Note: To use this function, user need to set Auto Pan in advance.
EVS200A/AW 11 ○ 1 Control Panel : Zoom in : Zoom out : Focus far Focus near : Iris + : Iris – Arrow buttons: Click on an arrow button to navigate in that direction. : stop current action. : User can select PTZ speed from High, Standard, Low and Minimum. Preset button : Click this button first, and i...
Page 12 - : Click this button to clear the digit selection indicator.
EVS200A/AW 12 Number button, Go button and Clear button : - Click desire number button and it will show in the gray text area at lower-left corner. - Click “Clear” button to clear the text area. - Click “Go” button to run a selected function. Clear button : Click this button to clear the digit selec...
Page 15 - : displaying date and time of the log.; Log message
EVS200A/AW 15 4.1.2 Log System Log: Date/Time : displaying date and time of the log. Log message : all information and event message, including login, user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records.
Page 18 - to apply the setting changes or; Reset; to reset without saving the
EVS200A/AW 18 the new language file (.evb) and then click the Upload button. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on t...
Page 20 - Apply
EVS200A/AW 20 Username: Enter User name of the account (used only for PPPoE). Password: Enter Password of the account (used only for PPPoE). Press Apply to apply the setting changes or Reset to reset without saving the change. Port Setting HTTP Port: Port number for HTTP/WEB communication. Press App...
Page 24 - Set Network Alarm
EVS200A/AW 24 4.3.5 Network Alarm (reserved for PowerCon) Set Network Alarm This function is reserved for PowerCon software, for the detail setting please refer to PowerCon network alarm protocol. 4.3.6 Wireless (For EVS200AW only)
Page 26 - Press; to reset without saving the change.
EVS200A/AW 26 Confirm Key: Double confirm network key. IP Status: Show IP status when wireless connection, including IP Type, IP Address, Subnet mask, Gateway, Primary DNS, Secondary DNS. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.4 Video The settings rel...
Page 29 - Enable Audio; box to enable audio function.
EVS200A/AW 29 Whenever the above three picture parameters are adjusted, the values will be set to the channel automatically. Press Apply to apply the setting changes or Reset to reset without saving the change. 4.5 Audio The EVS200A/AW video encoder can transmit audio to other clients using a built-...
Page 32 - record event video to remote site.
EVS200A/AW 32 4.7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed. This table describes how to setup action types and event type. Event Acti...
Page 40 - Enable Daylight Saving; checkbox to enable daylight saving.
EVS200A/AW 40 Press Apply to apply the setting changes or Reset to reset without saving the change. 4.8.2 Daylight Saving Set Daylight Saving Tick Enable Daylight Saving checkbox to enable daylight saving. Set the start time to daylight saving time. Set the start week of daylight saving time: 1 st /...
Page 42 - Do not turn the power of the camera off in the process of formatting
EVS200A/AW 42 disconnected. Normal: Follow the event actions settings you have made in “Event” menu to record event video to SD card. Overwrite: Select ON for overwriting data when SD card memory is full. Select OFF for not overwriting SD card data. Press Apply to apply the setting changes or Reset ...
Page 45 - Browse; button to search firmware file. Press; Upgrade; button to upgrade the
EVS200A/AW 45 Upgrade Firmware Upgrade the EVS200A/AW with the latest firmware. Press Browse button to search firmware file. Press Upgrade button to upgrade the firmware. 4.9 EKB200 4.9.1 Action List EKB200 Button Mapping EKB-200 is an IP surveillance keyboard controller powered by USB port. User ne...
Page 51 - EverFocus; EverFocus Electronics Corp.
EVS200A/AW 51 China Office: Room B-05D-1, KESHI PLAZA, Shangdi Information Industry Base,Haidian District, Beijing China 100085 TEL: +86-10-62973336/37/38/39 FAX: +86-10-62971423 www.everfocus.com.cn Europe Office: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany TEL: 49-2822-9394-0 FAX: 49-2822-...