EverFocus EPD200 - Manual
EverFocus EPD200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – power source ratings.; PREFACE
- Page 4 – DIMENSION DIAGRAM; Conduit Size
- Page 6 – Mount Camera
- Page 7 – Open Camera Bubble Cover; Turn the camera bubble until you see the arrow face to here.; Connecting to testing monitor EN220
- Page 8 – Adjust Camera Position and Lens; Adjust camera to the position you; The default setting is OFF; Iris level control VR.; The default setting is ON.
- Page 9 – The default setting is OFF.; •Turn clockwise to H to get brighter picture.; Electronic Shutter (For Fixed Lens Model); EverFocus Electronics Corp.
EVERFOCUS
Indoor Pendent Dome Camera
Operation Instructions
Model No.
EPD200
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or fire.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 6. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the camera lens. 7. Do not operate the camera beyond the specified temperature, humidity or power source r...
3 DIMENSION DIAGRAM a. Conduit Size b. HARDWARE OVERVIEW 26mm/1.06” 125mm/4.92” 110mm/4.33” 90mm/3.54” 80mm/3.15””
5 This section covers simple steps and detail installation. Please follow instruction for preventing any unnecessary damage. Simple Steps: 1. Connect to 26mm/1.06” EMT Conduit Pipe and lock it with Hex Wrench 2. Open camera bubble cover 3. Connect to testing monitor(optional accessories) 4. Adjust l...
