Page 4 - INSTRUCTION MANUAL ............................................................................... 1; Important Safety Instruction; these
INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Ins...
Page 5 - ............................................................................... INSTRUCTION MANUAL; such as vases, shall be placed no the apparatus.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachment/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the ...
Page 6 - INSTRUCTION MANUAL ............................................................................... 3; CAUTION; located/installed near the equipment and is easily accessible.; ATTENTION; située ou installée à proximité du matériel et être facile d`accès
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and mai...
Page 7 - ............................................................................... INSTRUCTION MANUAL
NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to ...
Page 8 - DOC COMPLIANCE NOTICE; INSTRUCTION MANUAL ............................................................................... 5
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate...
Page 11 - INSTRUCTION MANUAL ............................................................................... 7; OSD Menu Description; ) Press the MENU button and then press the up(; Brightness; : Increase or decrease the intensity of the image.
INSTRUCTION MANUAL ……………………………………………………………………. 7 OSD Menu Description A: CUSTOM MENU (For AV1, AV2 & S-Video Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) ...
Page 12 - ............................................................................... INSTRUCTION MANUAL
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Press the left(◀) or right( ▶ ) button to adjust the picture setting. 4) Press the MENU button to save. 8 ……………………………………………………………………. INST...
Page 13 - INSTRUCTION MANUAL ............................................................................... 9
2) Press the right( ▶ ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or INPUT button. 5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save 2. Color Tone 1) Press the up( ▲ ) or do...
Page 14 - ) button to select the Volume
3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left ...
Page 15 - 0 ............................................................................... INSTRUCTION MANUAL; ) button to select the Size
10 ……………………………………………………………………. INSTRUCTION MANUAL 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR
Page 16 - INSTRUCTION MANUAL ............................................................................... 11
1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 11 7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button...
Page 17 - ) button to select the Camera 540 option.; 2 ............................................................................... INSTRUCTION MANUAL
8. Camera 540 3) Press the up( ▲ ) or down( ▼ ) button to select the Camera 540 menu. 4) Press the right( ▶ ) or INPUT button. 5) Press the up( ▲ ) or down( ▼ ) button to select the Camera 540 option. 6) Press the MENU button to save. 12 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / So...
Page 19 - INSTRUCTION MANUAL ............................................................................... 13; or INPUT button again.
INSTRUCTION MANUAL ……………………………………………………………………. 13 3) Press the left( ▶) or INPUT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 2-2. Color Tone (Custom) 1) Press the up( ▲ ) or down( ▼ ) button to select the Custom in the Col...
Page 20 - Menu button to save.; 4 ............................................................................... INSTRUCTION MANUAL; Input
2) Press the Menu button to save. 14 ……………………………………………………………………. INSTRUCTION MANUAL 3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color density. 5) Press the MENU button to save. 4. PC control (Only PC Input )
Page 21 - INSTRUCTION MANUAL ............................................................................... 15
1) Press the up( ▲ ) or down( ▼ ) button to select the PC. 2) Press the right( ▶) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PC sub menu. 4) Press the right( ▶ ) or INPUT button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU butto...
Page 22 - Reset; : All settings go to the factory initialization.; 6 ............................................................................... INSTRUCTION MANUAL
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or INPUT button 2) Press the right( ▶ ) or INPUT button again. 3) Press INPUT button to execute the reset. Reset : All settings go to the factory initialization. 16 ………………………...
Page 23 - INSTRUCTION MANUAL ............................................................................... 17
2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right( ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the...
Page 24 - ) button to select the On or Off; How to unlock
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right( ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2...
Page 25 - 8 ............................................................................... INSTRUCTION MANUAL
18 ……………………………………………………………………. INSTRUCTION MANUAL 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right( ) or INPUT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right( ) or INPUT button. 3) Pre...
Page 26 - INSTRUCTION MANUAL ............................................................................... 19; ) button to select the Trigger Input option.
INSTRUCTION MANUAL ……………………………………………………………………. 19 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right( ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save. 6-3. Buzze...
Page 27 - 0 ............................................................................... INSTRUCTION MANUAL; ) button to select the Trigger Option setting.
20 ……………………………………………………………………. INSTRUCTION MANUAL 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button t...
Page 28 - INSTRUCTION MANUAL ............................................................................... 21
N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5[V]), Trigger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is...
Page 29 - 2 ............................................................................... INSTRUCTION MANUAL
1) Press the right( ) or INPUT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 4) Press the Menu button to save. 22 ……………………………………………………………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs enabled 1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Pr...
Page 30 - ) button to select the On or Off and then press the Menu button to save.; INSTRUCTION MANUAL ............................................................................... 23
5) Press the up( ▲ ) or down( ▼ ) button to select the On or Off and then press the Menu button to save. INSTRUCTION MANUAL ……………………………………………………………………. 23 7-3. Auto switching Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Time.
Page 31 - ) button to adjust the Time and then press the MENU button to save.
2) Press the left( ◀ ) or right( ▶ ) button to adjust the Time and then press the MENU button to save.
Page 33 - INSTRUCTION MANUAL ............................................................................... 25
Page 35 - 6 ............................................................................... INSTRUCTION MANUAL; PIN ASSIGNMENTS
26 ……………………………………………………………………. INSTRUCTION MANUAL ▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ACCESSORY 1. POWER CORD 2....
Page 36 - INSTRUCTION MANUAL ............................................................................... 27; POWER CONSUMPTION; GREEN Normal
INSTRUCTION MANUAL ……………………………………………………………………. 27 This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending h...
Page 37 - GREEN; POWER OFF; RED Not; 8 ............................................................................... INSTRUCTION MANUAL; RESOLUTION; Stereo Sound
UNSUPPORTES MODE GREEN Normal operation but the on screen Display will show error massage POWER OFF RED Not Operation 28 ……………………………………………………………………. INSTRUCTION MANUAL 8RTC 8RTF’ 8’’ Diagonal AM-TFT(Active-Matrix) 8.4’’ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.2025(H) x 0.2025(V) Pixel pit...
Page 39 - WEEE Symbols; 0 ............................................................................... INSTRUCTION MANUAL
WEEE Symbols 30 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of This Product(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates...