EverFocus EM500NH P2 - Manual
EverFocus EM500NH P2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – power source ratings.; PACKAGE CONTENTS
- Page 3 – SPECIFICATIONS
- Page 5 – CAMERA MAJOR PARTS FUNCTIONS; Back; The EMNH series cameras come with 3 types on pinhole lenses.
- Page 6 – Use the connector to connect with 12VDC power adaptor.; INSTALLATION; for preventing any unnecessary damage; Secure camera mounting bracket to mounting surface.; Mark 2 screw points in mounting surface.
- Page 7 – Fix camera to mounting Bracket.; arrow in figure 2.1 pointing at the power/video connector on bottom.; Connect power/video cable to camera power/video connector; separately
- Page 9 – Troubleshooting; No power; module and rotate it so can install for wall or ceiling.; See Installation A step 2; for explanation
- Page 10 – EverFocus Electronics Corp.; USA California Office:; 15 Oser Avenue Unit S
EVERFOCUS
1/3” Square Metal Case
DSP Color CCD Camera
Operation Instructions
Model No.
EM500NH P1, P3, P4
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or fire.
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
camera lens.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within 0° ~ 40° C (32° to 104° F) and humidity between 20%~ 80%. The input power source is 12VDC/24VAC. FEATURES z 1/3” Sony Super HAD CCD image sensor with approximately...
2 SPECIFICATIONS EM-500NHP1 EM-500NHP1 EM-500NHP1 Lens Size 3.7mm 3.7mm 4.3mm Lens Type Conical Pinhole Lens Flat Pinhole Lens Super Cone Pinhole Lens Dimensions 25 x 25mm | 0.98 x 0.98 Inches Video Format NTSC Image Sensor Color 1/3” High Res CCD Sony ICX638 Chip Scaning System 2:1 Interlace Scanni...
4 CAMERA MAJOR PARTS FUNCTIONS Front Back Camera power/video cable (1) Lens The EMNH series cameras come with 3 types on pinhole lenses. • Flat - EM500HP3, • Conical – EM500NHP1 • Super Conical – EM500NHP4 (2) Screw holes for included mounting bracket. 1 2 EM500NHP3 EM500NHP1 EM500NHP4 3 4 5 6
