EverFocus EHH5200 - Manual
EverFocus EHH5200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 4 – Package Contents
- Page 8 – NAMES AND FUNCTIONS OF PARTS; Exterior view; Front And Back Panel Layout; Rotatable cover
- Page 10 – Related Products; Warning
- Page 11 – Mounting Camera
- Page 14 – Adjusting Camera; Tilt
- Page 15 – Module can be adjusted up and down
- Page 17 – Correct
- Page 19 – Menu Tree
- Page 20 – DC mode is fixed in Lens level for EHH5200 camera.
- Page 21 – White Balance Control; One Push WB
- Page 22 – Select “Return” to return to the previous menu.
- Page 25 – EverFocus Electronics Corp.
2 Megapixel Full HDcctv
Outdoor Dome Camera
Operation Instructions
Model No.
EHH5200
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4.
Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within
-10°C~50°C (14°F~122°F)
and humidity between 20~80%.
The input power source is 12VDC/24VAC.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ........................................................................................................... 3 1.1 Main Features ...................................................................................................................................
- 3 - 1. PRODUCT OVERVIEW The EHH5200 is an HDcctv outdoor dome camera with true Day/Night capability in an IP66 vandal resistant housing. Based on a 2 megapixel progressive scan sensor for your choice of 1080 or 720 resolution HD 100% digital images, it delivers vastly superior video quality compar...
- 7 - (3) 2. NAMES AND FUNCTIONS OF PARTS 2.1 Camera Component Description Exterior view 2.2 Front And Back Panel Layout Front Panel Layout: Rotatable cover Outer Cover ring Base (4) (1) (2)
