EverFocus EHD300N - Manual
EverFocus EHD300N – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – power source ratings.; PREFACE
- Page 3 – INSTALLATION; Please pay attention not to damage the lens.
- Page 4 – Note
- Page 8 – DIP SWITCH FUNCTION; The default setting is OFF; Iris level control VR.; The default setting is ON.; •Turn clockwise to H to get brighter picture.; Electronic Shutter (For Fixed Lens Model)
- Page 9 – SIMPLE INSTRUCTIONS FOR THE DESICCANT PACK
- Page 10 – SPECIFICATIONS
- Page 11 – CONTENT LIST; Standard Accessories; Camera Unit; Optional Accessory
- Page 12 – EverFocus Electronics Corp.; 15 Oser Avenue Unit S
EVERFOCUS
1/3” Color Rugged Dome Camera
Operation Instructions
Model No.
EHD300N
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or fire.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 6. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the camera lens. 7. Do not operate the camera beyond the specified temperature, humidity or power source r...
2 INSTALLATION 1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Please pay attention not to damage the lens. 2. Remove the camera. To remove the camera, first unplug the wire connection on the back of the camera. Then loosen the 2 locking screws on the camera ...
3 3. Mounting the base. Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. Please make sure if the mounting is strengthened enough to support it, if not, please reinforce the mounting according to the environment. Note : The diameter of the screw ...
