EverFocus EHD300 - Manual
EverFocus EHD300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – power source ratings.; PREFACE
- Page 3 – INSTALLATION; Please pay attention not to damage the lens.
- Page 4 – Note
- Page 8 – DIP SWITCH FUNCTION; The default setting is OFF.
- Page 10 – SIMPLE INSTRUCTIONS FOR THE DESICCANT PACK
- Page 11 – SPECIFICATIONS
- Page 12 – CONTENT LIST; Standard Accessories; Camera Unit; Optional Accessory
- Page 13 – EverFocus Electronics Corp.
EVERFOCUS
1/3” Color Rugged Dome Camera
Operation Instructions
Model No.
EHD300
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
camera lens.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
6. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within –10 ℃ ~ 50 ℃ /14 ℉ ~ 122℉ and humidity between 20%~ 80%. The input power source is 12VDC/24VAC. PREFACE The most technically advanced EHD series are the newest vanda...
INSTALLATION 1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Please pay attention not to damage the lens. Figure 1 2. Remove the camera. Vari-Focal Lens Locking Screws Figure 2 To remove the camera, first unplug the wire connection on the back of the camera. ...
3. Mounting the base. Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. Please make sure if the mounting is strengthened enough to support it, if not, please reinforce the mounting according to the environment. Side conduit entry Note : The diame...
