Page 2 - Safety Warning
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A di...
Page 3 - Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and c...
Page 5 - Important Safeguards
Important Safeguards Read Instruction ---All the safety and operating instructions should be read before the init is operated Retain Instructions ---The safety and operating instructions should be retained for future reference. Heed Warnings —All warnings on the unit and in the operating instruction...
Page 6 - Important Safeguards and Warnings before Installation
Important Safeguards and Warnings before Installation For Mobile Digital Single Channel Video Recorder (single HDD)While the DVR is connected to the 12VDC battery of the vehicle, the limited electric current is 3.0 amps with a normal electric current between 1.5~1.0 amps. While the DVR is connected ...
Page 7 - The DVR can be mounted horizontally (suspend or support mounted).; Quick Install Guide
Support Suspend Interface Interface The DVR can be mounted horizontally (suspend or support mounted). Support Suspend Show all the possible ways to mount the DVR. Use the two Z-brackets supplied to mount it in any ways shown. Quick Install Guide EDSR400M EDSR400M EDSR400M EDSR400M
Page 8 - Quick Install Guide :; Choosing the Location
Quick Install Guide Quick Install Guide : 1.Unpack Everything Make sure you have everything you need before you begin the installation. 2.Equipment Required The following tools may help you to complete the installation:•Drill•Screwdrivers•Wire cutters 3. Choosing the Location Choose a location for i...
Page 12 - Installing the Hard Drive
Quick Install Guide Installing the Hard Drive As following are the figure for the 3.5” and 2.5” HDD. Figure shows 3.5“ HDD Figure shows 2.5“ HDD
Page 13 - Table of Contents
Table of Contents 1. Product Overview……….…...……………………………………………………………………… 1 1.1 Feature ………...…………….….…………………………………….…………..……………….……1 1.2 Specifications…………….…...………….………………….……………..……….…….…………………………………..2 2. Front & Rear Panels………...…….………………………………………..………………………..3 3. Back Panel Connections…….……...
Page 15 - Product Overview and Features
1. Product Overview 1.1 Features Product Overview and Features Easy-to-use control panel with common VCR Shuttle/Jog dial for picture-by-picture or fast/slow viewing No tapes to manage, clean or replace Instant retrieval of stored video On-screen setup menu and system timer Ethernet TCP/...
Page 16 - Specifications; Power Consumption
Specifications 2 4 camera inputs (BNC),1Vp-p/75ohm Video Input M-JPEG Video Compression 0 ℃ ~+50 ℃ Operating Temperature 320.8mm (L) x 215mm (W) x 109.9mm (H) Dimension RJ45 Connector RS485 9-pin female connector RS-232 Yes Watch Dog Timer Built-in real time clock Timer Front Panel Keypad User Input...
Page 17 - Front Panel Keypads; SEQ; KEY
20 10 9 12 11 13 14 16 21 19 18 17 Front Panel Keypads CH1 ~CH4: . 1 4 3 2. Front Panel Keypads 15 22 2 1 4 3 5 6 8 7 Press channel key (1~4) to display video image in the full screen format, the picture of the corresponding will fill the whole screen of the monitor display. ~ SEQ : Press this key t...
Page 18 - Shuttle and Jog Dial
Display: Press this key to switch ON/OFF. 16 Display OFF Display Date/Time and titles Shuttle and Jog Dial Shuttle : In Playback mode, turn the shuttle dial can fast forward/rewind the picture.In Pause mode, turn the shuttle dial can slow forward/rewindthe picture. Jog Dial : 19 In Pause mode, turn ...
Page 19 - MONITOR; Back Panel Connections; Alarm Input
VIDEO IN (1~4): The BNC connectors of video input enables the system to receive the signals from each camera through the 75 ohm coaxial cables. VIDEO IN /Output VIDEO OUT(1~4) : Connect the other devices with four cameras to the other devices. MAIN MONITOR : This connector is used for the Main monit...
Page 20 - Audio input for recording.; AUDIO; Back Panel Connections; Connect the DC12~24V power source to the power input terminal.; POWER
Back Panel Connections Audio IN : Audio input for recording. Audio OUT : Audio output can be set to “ON” or “OFF” in Setup Menu. When in recording or standby mode, the out of SW1 is connected to Audio IN. Playback Audio When in playback mode the out of SW1 is connected to SW2 Audio. When Playback Au...
Page 21 - Connect D-Sub 9 pins connector to RS232 ports for remote control; RJ 45 Connector to Cascade multi Digital Video Recorder.
LAN Connector : The RJ-45 LAN connector. LAN 7 RS232 RS232 connector : Connect D-Sub 9 pins connector to RS232 ports for remote control 8 Back Panel Connections 7 RS485 RS485 connector : RJ 45 Connector to Cascade multi Digital Video Recorder. 9 10 FAN: Cooling FAN.
Page 22 - CALL Monitor; System Connection; Before Installation; Main Monitor
CALL Monitor System Connection 8 4. System Connection The installations described below should be made by qualified service personnel or system installers. 4.1 Before Installation Please refer to the following diagram for the system connections. Camera 1~4 Audio Output Speaker Main Monitor Ethernet ...
Page 23 - Speaker; Connect the speaker or other audio devices.; Connect the power source or adapter into the power socket.; Cameras; Basic Connections
System Connection 9 Speaker Connect the speaker or other audio devices. Ethernet Digital Video Recorder is enabled control form the PC via Ethernet. Connect the LAN connector to a standard RJ45 connector Ethernet cable. RS232/RS485 Digital Video Recorder is enabled control from the PC via RS232/RS48...
Page 24 - INSTALLATION; The detail connection is described in SYSTEM CONNECTION; MENU
INSTALLATION 10 (1) Insert a HDD (IDE) for Video Storage (2) Connect cable for video/audio input and video/audio out, The detail connection is described in SYSTEM CONNECTION . (3) Switch Power On The POWER LED lights if power is normal . (4) Press MENU key to enter SET UP MENU. Once inside the main ...
Page 27 - CLOCK/LANGUAGE SETTING MENU; or to move the cursor to the left or right.
MENU 13 In CLOCK/LANGUAGE SETTING MENU , we define: (1) DATE : Current date Year: 2000 ~ 2099 Month: 01~ 12 Date: 01~31 Week: Sunday~Saturday (2) TIME : Current time Hour: 00 ~ 23 Minute : 00 ~ 59 Second: 00 ~ 59 (3) MENU LANGUAGE: ENGLISH (4) VIDEO SYSTEM : Factory default setting depend on machine...
Page 28 - TITLE SETTING MENU; Default setting is shown above.; Press; or to change the value.
MENU 14 6.2 TITLE SETTING MENU TITLE SETTING MENU CH1:_ _ _ _ _ _ _ _ _ _ _ _CH2:_ _ _ _ _ _ _ _ _ _ _ _CH3:_ _ _ _ _ _ _ _ _ _ _ _CH4:_ _ _ _ _ _ _ _ _ _ _ _ In TITLE SETTING MENU , we define: The title setting menu allows you to assign a title to each camera input.Titling with up to 9 characters i...
Page 29 - DAYLIGHT SETTING MENU; ” Use the arrows to set the present week
MENU 15 6.3 DAYLIGHT SETTING MENU DAYLIGHT SETTING MENU DAYLIGHT SAVING: OFF START TIME: FIRST SUNIN MARCHCHANGE FROM 03:00 TO 04:00 STOP TIME: FIRST SUNIN MARCHCHANGE FROM 04:00 TO 03:00 In DAYLIGHT SETTING MENU , we define: (1) DAYLIGHT SAVING: Select “ON” or “OFF” while the daylight saving time f...
Page 30 - FIRST
(3) STOP TIME: : Press or to move the cursor to the left or right. : Press or to change the value. “ FIRST ” Use the arrows to set the present week FIRST SECOND THIRD FOURTH “ SUN ”Use the arrow to set the present date Thursday Sunday Friday Tuesday Monday Wednesday Saturday “ IN MARCH ”Use the arro...
Page 31 - TIMER SETTING MENU; In TIMER SETTING MENU, we define
MENU 6.4 TIMER SETTING MENU TIMER SETTING MENU WEEK START STOP SPEED QUALITY SET SUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00 23:59 60 IPS STANDARD OFFSUN 00:00...
Page 32 - In NORMAL RECORDING MENU, we define; NORMAL RECORD SETTING MENU
MENU 18 NORMAL RECORD SETTING MENU SPEED QUALITY DISK FULL 60 IPS STANDARDREWITE ::: In NORMAL RECORDING MENU, we define (1) SPEED : Recording Speed The entry allows user to set the normal recording speed . (2) QUALITY: Video recording quality setup, this item lets you set the quality of the video p...
Page 33 - In ALARM RECORDING MENU, we define; Records when alarm occurs.; ALARM RECORD SETTING MENU
In ALARM RECORDING MENU, we define (1) ALARM OPERATION : ON : Records when alarm occurs. OFF : Do not record when alarm occurs. (2) RECORDING SPEED : The recording speed in alarm duration. (3) RECORDING QUALITY : Select the Recording picture quality when alarm occurs. MENU 19 ALARM RECORD SETTING ME...
Page 35 - RELAY; RELAY; COIL; RELAY
MENU (a.) Alarm out To external equipment 8 2 1 9 COIL RELAY There are two ways to do the alarm out connection: Normally Closed Connection (use pin # 13 and # 12) To external equipment 8 2 1 15 9 COIL RELAY 8 2 1 15 9 COIL RELAY To external equipment Normally open connection (use pin # 13 and # 14) ...
Page 36 - Alarm in
MENU Alarm in There are four alarm inputs. Please connect the alarm input in the same sequence as thecameras input BNC. When any alarm signal comes in, the Digital Video Recorder will do the following: 1. Display Alarm Message 2. Turn on the buzzer if the buzzer setting is on. The ALARM in can be se...
Page 38 - ON, the buzzer will sound when the alarm occurs.; BUZZER SETTING MENU
BUZZER SETTING MENU BUZZER ALARM –IN RECORD -IN DISK FULL VIDEO LOSS TIMER In BUZZER SETTING MENU, we SET the buzzer ON/OFF under the following conditions: (1) BUZZER : ENABLE: Select buzzer to be on.. DISABLE: Select buzzer to be off. (2) ALARM –IN : ON, the buzzer will sound when the alarm occurs....
Page 39 - ARCHIVE SETTING MENU; ON; In the ARCHIVE SETTING MENU, we define
MENU ARCHIVE SETTING MENU PICTURE SIZETIME STAMPTIME STAMP POSWATER MARKWATER MARK POS 720x480ONTOPONTOP ::::: 6.8 ARCHIVE SETTING MENU (1) PICTURE SIZE : Selects picture size for copying image to CF card Big size:720x480/720x576 for NTSC/PAL Small size:352x240/352x288 for NTSC/PAL (2) TIME STAMP : ...
Page 40 - NETWORK SETTING MENU
6.9 NETWORK SETTING MENU NETWORK SETTING MENU IP ADDRESSNET MASK ADDRESSGATEWAY ADDRESS USER-NAME PASSWORD LEVEL 192.168.010.005255.255.255.000192.168.010.001 ::: GUEST GUEST GUESTGENERAL GENERAL GENERALADMIN ADMIN SUPER (1) IP ADDRESS : Assign an IP address for this unit, for example:192.168.010.00...
Page 41 - Note: Call monitor will display automatically when alarm working.; SEQUENCE SETTING MENU; In the SEQUENCE SETTING MENU, we define
MENU (1) MAIN MONITOR : DWELL TIME : The main Dwell Time determines the rate at which the sequences cameras on the main monitor. The dwelling time for the auto sequencer can be set between ( 0-99) seconds. SEQ WITH QUAD: ON: The quad screen display is under the auto sequential switching mode. OFF:Th...
Page 42 - In the RS232/RS485 SETTING MENU, we define
MENU (1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or information through the RS232 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud, 19200 baud,and 3840 baud. The default setting from the factory is 9600 baud. (2) RS232 STOP BIT: Select stop b...
Page 43 - Select MOTION RECORDING SPEEED; MOTION RECORD SETTING MENU; Select camera form CH1 to CH4.
MENU (1) RECORDING SPEED: Select MOTION RECORDING SPEEED (2) RECORDING QUALITY: Select the Motion recording picture quality when motion occurs. 29 MOTION RECORD SETTING MENU 6.12 MOTION RECORD SETTING MENU RECORDING SPEEDRECORDING QUALITY CH OP SEN In the MOTION RECORD SETTING MENU, we define : 60 I...
Page 44 - Use the arrows to move the square for motion recording.
(5) SEN:(SENSITIVITY) This entry allows user to set the Motion recording picture’s quality for each camera when motion occurs.There are four different sensitivity that can be used to set the picture’s quality, High, Standard,Basic, and Low.The default setting is “STANDARD”. : Press or to move the cu...
Page 45 - Play back with or without audio.; SYSTEM SETTING MENU; In the SYSTEM SETTING MENU, we define; Copy the update files into Compact Flash card ON PC and insert the
MENU (1) PLAY WITH AUDIO: ON/OFF: Play back with or without audio. (2) DISK RENEW: 31 SYSTEM SETTING MENU 6.13 SYSTEM SETTING MENU In the SYSTEM SETTING MENU, we define PLAY WITH AUDIODISK RENEWSYSTEM UPDATELOAD DEFAULTPASSWORD INABLEPASSWORD : ON: NO: NO: NO: NO : 123456 (3) SYSTEM UPDATE : YES/NO ...
Page 46 - With up to 6 characters is supported in the digital video recorder.
(4) LOAD DEFAULT : YES/NO : Load the Load System. YES : The double check dialog will appear on the screen. MENU 32 (5) PASSWORD INABLE: Password is used to prevent unauthorized personnel to change any setup of the device. Set “ NO” to release password function, set “ YES” to enable password function...
Page 47 - INSTANT RECORDING; Video out; Press Stop key to stop recording.; • Stop key can be activated only in recording mode.; Press Record key to start the recording immediately.; Recording; REC
7.1 INSTANT RECORDING When pressed, the pictures being monitored will be recorded in the HDD. •The recording rate and recording quality are set in the Record Set menu • “ RECORD ” appears in the operating display Video out Press Stop key to stop recording. • Stop key can be activated only in recordi...
Page 48 - During user setting “ON” in the ALARM OPERATION
Press MENU key and turn the jog dial to select the ALARM RECORDING SETTING MENU. Instant recording and timer recording will stop when an alarm occurs. RECORDING OPERATION: ON: Enables alarm recording, OFF :Disables alarm recording. RECORDING SPEED: Set the recording speed when alarm occurs. RECORDIN...
Page 50 - Playing Back; PLAY
8.1 NORMAL PLAYBACK Press the PLAY key to start playing back the stored image/audio from the last SEGMENT. (1) Playback Press the REV.PLAY key to start reverse playing back the stored image/audio from the last segment. Press the STOP key to stop playing back. (3) Fast Forward/Reverse Playback Press ...
Page 51 - PAUSE; Press PAUSE key to freeze the picture.
Playing Back 37 (4) Slow Forward/Reverse Playback During Playback,press PAUSE key to freeze the playing back picture. Turn the shuttle clockwise and slow forward playback starts. The speed will show on the SCREEN at the corner of the screen.>> 1/2, 1/4, 1/6, 1/8, 1/10, 1/16, 1/32 Turn the shut...
Page 52 - Press the SEARCH key to enter the Search menu.; SEARCH
8.2 SEARCH PLAYBACK (1) Segment Search Playback Press the SEARCH key to enter the Search menu. SEARCH MENU BY SEGMENT LISTBY ALARM LISTBY DATA TIME Press the keys to move the cursor to BY SEGMENT LIST and press ENTER key to select file search. SEGMENT SEARCH 0001 00020003 Playing Back SEARCH Press t...
Page 53 - Press SEARCH key to enter the Search menu.
Playing Back (2) Alarm Search Playback Press SEARCH key to enter the Search menu. Press the keys to move the cursor to BY ALARM LIST and press ENTER key to select alarm search. ALARM SEARCH 123 Press the keys to move the cursor to select the alarm image to be played back.When the selection list is f...
Page 54 - start playing back from the nearest set time automatically.
Playing Back (3) Date/Time Search Playback Press SEARCH key to enter the Search menu. Press the keys to move the cursor to BY DATE/TIME and press ENTER key to select file search. DATE/TIME SEARCH YEAR/MM/DD HH:MM:SS2005 01 01 21 33 26 SEARCH SEARCH Notice: If there is no image stored in the date/tim...
Page 55 - COPY; Press the PLAY key to start playing back.; COPY TO MOVIE FILE; COPY
COPY Press COPY key and then the copy menu appears.The full screen will show up from Quad display. COPY 42 Press the PLAY key to start playing back. PLAY 9.2 COPY TO MOVIE FILE CH4COPY TO MOVIE FILE PRESS CH1~CH4 TO CHOOSEUSE JPG TO SELECT PICTURE PRESS COPY TO START COPYPRESS PAUSE TO STOP COPYPRES...
Page 56 - Turn the jog dial clockwise to choose your desired image.; Copied images are stored as a single picture.
COPY Insert a Compact Flash card into the Compact Flash slot on the front panel. When inserting the Compact Flash card, make sure that the direction of insertion is correct. Turn the jog dial clockwise to choose your desired image. PAUSE Press the PLAY key to start playing back.Press the PAUSE key t...
Page 57 - Copied images are stored as a movie picture.
COPY 43 PAUSE STOP Notice: Copied images are stored as a movie picture. Copied files are saved as .MOV file.Use QuickTime to play the retrieved .MOV files. You may download QuickTime at www.apple.com . The playback version for QuickTime is free. SEARCH Press “PAUSE” button once to stop copy image. P...
Page 58 - Interface Specifications; Transmission setting; The pin assignment of the 9-pin D-SUB connector; Digital Video Recorder; HOST; The default setting from the factory is 9600 baud.
Interface Specifications RS232 10.1 Transmission setting The pin assignment of the 9-pin D-SUB connector PIN # NAME PIN # NAME 1 NOT CONNECTED 1 NOT CONNECTED 2 TXD 2 RXD 3 RXD 3 TXD 4 NOT CONNECTED 4 NOT CONNECTED 5 GROUND 5 GROUND 6 NOT CONNECTED 6 NOT CONNECTED 7 NOT CONNECTED 7 NOT CONNECTED 8 N...
Page 59 - Remote Control Protocol
10.2 Remote Control Protocol A computer or a terminal can be used to control the unit by sending the packet as following. Interface Specifications 45 =========================================================Digital video recorder RS 485/232 Control Code Protocol =====================================...
Page 60 - This Length Byte is also a prefix. Bit7 must be 1.
2-1. The format of message packet is as follows: Length Byte (Prefix: 0x86, 0x87, or 0x88 ..... )Receiver ID high byteReceiver ID low byteOpcode ByteData Byte1Data Byte2Data Byte3..Checksum Byte 2-2. Length Byte This Length Byte is also a prefix. Bit7 must be 1. EX: 0x87 ==> this packets has 7 by...
Page 63 - Remote Controller
Remote Controller The remote controller is an accessory to enhance the handy operations of digital video recorder (Figure 1). You can do all the settings and operations by the remote controller. The effective distance is up to 10 meters without any obstacles. The keypad functions are as same as the ...
Page 66 - Basic Operations and Login Display:; (must be the same IP address as the one assigned to the
13. View From Internet/Intranet Basic Operations and Login Display: Go to the Internet Explorer, key in the network IP address, for example, http://192.168.10.5 (must be the same IP address as the one assigned to the unit from the Network Setting Menu.) The “ digital video recorder login” page will ...
Page 67 - Main Screen; Playing back the Video display.; Step Forward; the Video display
Main Screen Above diagram is the main screen display.The icons on the lower corner of the screen are mainly for control and Configuration, those on the right corner are for status indication.If any icon is grayed, it means that the specific function is not accessible in the current mode.The followin...
Page 71 - LAN Functional Specification; Image Compress: JPEG
LAN Functional Specification Specifications: Network Interface: 10Mbits/s Ethernet (10Base T)LAN controller Chip: RealTek 8019LAN Connector: RJ-45Protocol: HTTP,TCP/IP.ICMP,ARPRemote Access: Standard browser such as internet Explorer/Netscape with JAVA support. Image Compress: JPEG 57
Page 72 - EverFocus Electronics Corp.; FAX; EverFocus
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chi, Taipei, TaiwanTEL : 886-2-26982334 FAX : 886-2-26982380 USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A.TEL : 1-626-844-8888 FAX : 1-626-844-8838 Japan Office: 1809 WBG Marive East 18F,2-6 Nakase.Miha...
