Page 2 - Updated on Oct 20
Important Notice: Do not remove the hard disk while machine is recording. Or stop first before removing the hard disk. Updated on Oct 20 th , 2005
Page 3 - Safety Warning
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A di...
Page 6 - Important Safeguards
Important Safeguards Read Instruction ---All the safety and operating instructions should be read before the unit is operated. Retain Instructions ---The safety and operating instructions should be retained for future reference. Heed Warnings —All warnings on the unit and in the operating instructio...
Page 7 - Table of Contents
Table of Contents 1. PRODUCT INTRODUCTION …………………………………………………………….………… 1.1 FEATURES …………………………………………………………………..…………..…………. 1.2 SPECIFICATIONS…………………………………………………………………………….……… 1.3 FRONT PANEL KEYPADS …………………………………………………………..…….……… 1.4 BACK PANEL CONNECTORS …………………………………………………………….……… 1.5 MONITOR DISP...
Page 8 - NORMAL PLAYBACK...........................................................................................
Table of Contents 5. PLAYING BACK……………………………..……………………………………………..………... 5.1 NORMAL PLAYBACK……………….……………………………………………………………… 5.2 SEARCH PLAYBACK …………………………………………………….………………………… 6. COPY TO A VIDEO FILE ………………………………………………….………………………… 7. CALL ………………………………………………………………………..……….………………… 8. SCREEN DISPLAY SET...
Page 9 - PRODUCT INTRODUCTION; best choice for security surveillance.
Multiplex Operation (Recording, Playback, Archiving, Remote Viewing) Built-in MPEG4 Codec with Configurable Quality EDR1640: Variable Recording Speeds Up to 480/400(CIF) Pictures per second for NTSC/PAL Audio Recording Capabilities Motion Detection Capabilities Two 3.5 ” Hot-Swap Hard Di...
Page 11 - Audio
10 RS-232 9-pin female connector for local communication RS-485 For Keyboard and PTZ connection Audio 4 mono input, 1 mono (SPEAKER) output Power Source AC100~240V±5%
Page 12 - SEARCH MENU
1.3 FRONT PANEL KEYPADS KEY 11 2 3 4 7 6 5 8 REC: Press this key to start instant recording. STOP: Press this key to stop recording and playing back. PLAY: Play Back. PAUSE: Press this key to pause the playback picture. SEARCH: Press this key to enter the SEARCH MENU . COPY: Press this key to start ...
Page 13 - SEQ; Press this key to enter the auto sequential switching mode.; CALL MENU; Press this key to enter or quit; MAIN SETUP MENU; and; Playback modes
12 SEQ : Press this key to enter the auto sequential switching mode. 12 13 14 CALL: Press this key to enter and set up CALL MENU . MENU: Press this key to enter or quit MAIN SETUP MENU . 10 11 MODE: Switch PIP, 4, 7, 9, 10, 13 and 16 displays in Live and Playback modes . ZOOM: Press this key while v...
Page 15 - Audio inputs 1~4 for recording, and it can be set to “; YES; ” or “; RECORD; Connect an audio output to a monitor or other device.; AUDIO; BACK PANEL CONNECTORS; POWER; display modes may be selected for viewing.; MONITOR
Audio IN: Audio inputs 1~4 for recording, and it can be set to “ YES ” or “ NO ” in the RECORD SETUP MENU. Audio OUT: Connect an audio output to a monitor or other device. AUDIO 1 2 1.4 BACK PANEL CONNECTORS Main Power plug: Connect the DC 12~ 24V power source to adapter for AC 100~ 240V. POWER MAIN...
Page 22 - The system will be turned on after connecting to power.; Speaker; Connect the speaker or other audio devices.; Power; Connect the power source or adapter into the power socket.; Cameras; BASIC CONNECTIONS
(1) Insert a HDD (IDE) for Video Storage Insert a HDD(IDE) for Video Storage. The HDD should be set as MASTER. After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position. Otherwise, HDD will not be detected. Note: A HDD has to be installed before EDR1640/...
Page 26 - Select “; ON; OFF; automatically when network is connected.; TIME SYNCHRONIZE; , you can select the synchronization frequency by:
(8) TIME SYNCHRONIZE: Select “ ON ” or “ OFF ” to enable or disable time synchronize which can let you have correct time automatically when network is connected. (9) TIME SERVER: You can set the time server address where you locate if you connect to network and enable timesynchronize. For checking t...
Page 27 - CAMERA SETUP MENU
3.2 CAMERA SETUP MENU In the CAMERA SETUP MENU, we define : (1) TITLE: The title setting allows you to assign a title to each camera input. Titling with 12 characters is supported in each channel. The available alphanumeric characters are: 0,1,2,3,4,5,6,7,8,9, A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T...
Page 30 - RECORD SETUP MENU
3.3 RECORD SETUP MENU In the RECORD SETUP MENU, we define : (1) RECORD AUDIO: YES: Audio will be recorded when machine is recording. NO: Audio will not be recorded when machine is recording. (2) TIME STAMP: ON: The time stamp will show on the video and picture when recording. OFF: The time stamp wil...
Page 33 - NETWORK SETUP MENU
(4) RETRIGGER: Re-trigger the alarm. YES : The duration time starts when an alarm is triggered. The duration time restarts from 0 when a new alarm is triggered during an alarm action. NO : The alarm signal will not be triggered again during duration time. (5) DURATION: Buzzer noise and event record ...
Page 35 - MOTION SETUP MENU
3.5 MOTION SETUP MENU In the MOTION SETUP MENU, we define : (1) MOTION: ENABLE: Enable motion detection. DISABLE: Disable motion detection. Note: Motion only works in live and playback modes. It is invalid when you are setting menus. (2) SENSITIVITY: The sensitivity allows users to adjust to a suita...
Page 40 - SUMMARY; table. This table is only for checking video
(6) ALARM NETWORK: YES: Enable alarm network. NO: Disable alarm network. (7) SUMMARY: All video loss’s statuses are shown in SUMMARY table. This table is only for checking video loss overall statuses, not for setting. 39
Page 41 - NETWORK SETUP MENU; CONFIG
3.7 NETWORK SETUP MENU Please Note: Since every Network Configuration is different, please contact your Network Administrator or ISP for how to assign those IP addresses and port numbers. In CONFIG of the NETWORK SETUP MENU, we define : (1) DHCP: Enable or disable the Dynamic Host Communication Prot...
Page 42 - ALARM
(6) HTTP PORT: The default port number is 80. User can change it to different port number for HTTP/WEB communication between DVR and client PC. (7) CONTROL PORT: The default port number is 1600. User can change it to different port number for Controlling comment between DVR and client PC. (8) DATA P...
Page 44 - PASSWORD
3.7.4 PASSWORD In the PASSWORD of the NETWORK SETUP MENU, we define : (1) NAME: assign the login name for remote accessing. (2) PASSWORD: assign the password for remote accessing. (3) LEVEL: assign the accessing Right/Priority of that login user PLAY: User is allowed to playback the video. LIVE: Use...
Page 45 - SCHEDULE SETUP MENU
3.8 SCHEDULE SETUP MENU In the SCHEDULE SETUP MENU, we define : (1) DAY: MON (Monday), TUE (Tuesday), WED (Wednesday), THU (Thursday), FRI (Friday), SAT (Saturday), SUN (Sunday). WDAY: Weekday, from Monday to Friday. WEND: Weekend, Saturday and Sunday. DLY: Daily. (2) START: The start time of a sche...
Page 47 - CONTROL SETUP MENU; EVEN
3.10 CONTROL SETUP MENU In the CONTROL SETUP MENU, we define : (1) RS 232: BAUD RATE: There are 5 different speeds that can be used to transmit instruction or information through the RS232 port on the device, which are 2400, 4800, 9600, 19200, 38400 and 57600 BPS. The default setting from the factor...
Page 49 - WARNING SETUP MENU; FAN FAULT
3.11 WARNING SETUP MENU 3.11.1 FAN FAULT In Warning Setup Menu, you will be able to do warning setting when the following situations occur: In FAN FAULT , we define: (1) BUZZER: Fan buzzer. ENABLE: To enable a buzzer when the fan does not work. DISABLE: To disable fan buzzer. (2) ALARM OUTPUT: The s...
Page 50 - ALARM DURATION: PERMANENT
In HDD TEMP. , we define: (1) BUZZER: HDD TEMPERATURE buzzer. ENABLE: To enable a buzzer when HDD’s temperature is over 70 ° C. DISABLE: To disable HDD TEMP. buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: PERMANENT (4) NETWORK ALARM: YES: To enable...
Page 51 - NO HDD
In NO HDD , we define: (1) BUZZER: NO HDD buzzer. ENABLE: To enable a buzzer when no HDD has been found. DISABLE: To disable NO HDD buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: Buzzer noise and event record duration of an alarm, from 1 sec to 99 ...
Page 52 - HDD FULL
In HDD FULL , we define: (1) BUZZER: HDD FULL buzzer. ENABLE: To enable a buzzer when HDD is full. DISABLE: To disable HDD FULL buzzer. (2) ALARM OUTPUT: The setting of alarms which are NONE, 1, 2, 3 and 4. (3) ALARM DURATION: Buzzer noise and event record duration of an alarm, from 1 sec to 99 seco...
Page 53 - SYSTEM SETUP MENU
3.12 SYSTEM SETUP MENU In the SYSTEM SETUP MENU, we define : (1) SYSTEM VERSION: Current system firmware version. (2) SYSTEM VIDEO FORMAT: NTSC or PAL System can detect the input signal type automatically from camera 1 while system is booting up. Users do not need to set it up. Note: The signal type...
Page 55 - User Level and Right; The above table will be updated if there is any change.; System Setup Menu; Delete disk in
LEVEL-3 LEVEL-2 LEVEL-1 NONE ACCESS ADM INISTRATOR OPERATOR GENERAL ---- DISPLAY OK OK OK OK M ODE OK OK OK OK ZOOM OK OK OK OK SELECT OK OK OK NO SEQ OK OK OK NO CALL OK OK NO NO M ENU OK NO NO NO COPY OK NO NO NO SEARCH OK NO NO NO PLAY OK NO NO NO STOP OK NO NO NO REC OK NO NO NO PAUSE OK NO NO N...
Page 56 - INSTANT RECORDING
4.1 INSTANT RECORDING When REC is pressed, the pictures being monitored will be recorded in the HDD. •The recording rate, recording quality and recording speed can be set in the CAMERA SETUP MENU . • A “ RECORD ” sign appears in the record status bar. Press STOP key to stop instant recording. • The ...
Page 57 - SCHEDULE RECORDING
Set up the DAY , START time, END time and then enable the SET in the SCHEDULE SETUP MENU. Please refer to SCHEDULE SETUP MENU, to see setting procedure and more details. 4.2 SCHEDULE RECORDING 4.3 EVENT RECORDING We define two event types which are ALARM and MOTION events can be recorded. After the ...
Page 63 - Insert a USB pocket driver into USB slot on the front panel to copy.; Press; COPY; key and then the copy menu appears.; COPY TO A VIDEO FILE
Insert a USB pocket driver into USB slot on the front panel to copy. USB SLOT: COPY Press COPY key and then the copy menu appears. Digital Video Recorder allows users to select the camera for copying image to movie file or copying EDR Viewer player. The camera title will be displaying at the top of ...
Page 66 - SCREEN DISPLAY SETTING
8. SCREEN DISPLAY SETTING In a full screen display, press SELECT key to pop up the display adjustment window as below: In the screen display setting menu, we define: (1) CAMERA: The display setting of the current camera. (2) BRIGHTNESS: The bright percentage of the current camera; from 0% to 100%. (...
Page 67 - SCREEN DISPLAY MODE; MODE
9. SCREEN DISPLAY MODE Press MODE to switch 4, 7, 9, 10, 13, 16 and PIP (picture in picture) displays for Live and Playback mode. 66
Page 68 - Basic Operations and Login Display:
10. REMOTE VIEWER 67 Basic Operations and Login Display: Go to the Internet Explorer, key in the network IP address, for example, http://220.228.98.9(must be the same IP address as the one assigned to the unit from the Network Setting Menu. please contact your ISP or MIS for the IP assignment) The L...
Page 69 - Main Screen
68 Main Screen The above diagram is the main screen display.The icons on the lower corner of the screen are mainly for control and configuration, those on the right corner are for status indication.If any icon is grayed, it means that the specific function is not accessible in the current mode.The f...
Page 70 - The system allows up to 3 ways to playback video, by; EVENT LIST; PTZ Control
69 7. The system allows up to 3 ways to playback video, by EVENT LIST , Time and PTZ Control . (Playback by EVENT LIST, click “Update” button to show list) (Playback by PTZ Control) (Playback by Time)
Page 73 - Run; Save
II. Select “ Run ” or “ Save ” the file. III. Open the EDRViewer.exe for loading the archived EDR MPEG Files (.arv) 72
Page 74 - APPENDIX; The pin assignment of the 9-pin D-SUB connector
APPENDIX RS232 The pin assignment of the 9-pin D-SUB connector D-SUB 9-pin connector This Digital Video Recorder can be controlled by a computer or a terminal via a standard D-SUB 9-pin RS-232 connector. Transmission setting There are 6 different speeds that can be used to transmit instruction or in...
Page 76 - Alarm I/O pin assignment; The alarm connector,; Figure 1; , is used to provide one sensor alarm input for each camera input.; Figure 2; , is provided to connect to the alarm connector.
Alarm I/O pin assignment The alarm connector, Figure 1 , is used to provide one sensor alarm input for each camera input. For easy operation, an alarm extension board, Figure 2 , is provided to connect to the alarm connector. Each alarm input requires two wires, one wire connects to the desired alar...
Page 77 - EverFocus Electronics Corp.; EverFocus
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chih, Taipei, TaiwanTEL: +886-2-26982334FAX: +886-2-26982380www.everfocus.com.tw USA Office: 1801 Highland Ave. Unit ADuarte, CA 91010, U.S.A.TEL: +1-626-844-8888FAX: +1-626-844-8838www.everfocus.com European Office: Alb...
