EverFocus ED550 - Manual
EverFocus ED550 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NAMES AND FUNCTIONS OF PARTS
- Page 4 – Package Contents
- Page 6 – Internal Sensor is a Day/Night Switch Sensor.; Internal Sensor
- Page 10 – CAMERA SETUP OPERATIONS; This camera utilizes an On Screen Display (OSD) user setup menu.
- Page 11 – Display/Close the user setup menu screen
- Page 13 – Press SET button when you finish all the settings.
- Page 14 – White Balance Control; Please select one of the 3 modes below:
- Page 21 – allows you to return to the previous menu.
- Page 26 – EverFocus Electronics Corp.; 15 Oser Avenue Unit S
EVERFOCUS
560 TVL True Day/Night Indoor
Vandal Color Camera
Operation Instructions
Model No.
ED550
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers
since the magnetic fields generate from above devices will distort the video image.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from wet and never touch the power cord with wet hands.
Touching the wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or file.
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera
body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens.
7.
Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0
℃
~ 40
℃
(32
℉
~ 104
℉)
and 20%~80% Humidity. The input
power source is 12VDC/24VAC.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 2 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ...................................................................................................... 4 1.1 Main Features ........................................................................................................................................
- 4 - 1. PRODUCT OVERVIEW The new ED550 camera is designed with advanced new generation 16-bit DSP which has powerful processing capability to show over 5 6 0TVL horizontal resolution. Built-in DNR (Dynamic Noise Reduction) function, the camera performs clear & crisper image in low light and sub...
- 6 - 1.4 Dimensions 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front Panel Note: Internal Sensor is a Day/Night Switch Sensor. Internal Sensor
