Page 2 - Safety Precautions
Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and c...
Page 3 - Safety Warning
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Notice: The information in this manual was current when published. The manufacturer reser...
Page 4 - Service
The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the appliance. Warning : To prevent fire or shock hazard, do not expose units not specifically designed for outd...
Page 5 - Important Safeguards
Important Safeguards Read Instruction ---All the safety and operating instructions should be read before the init is operated Retain Instructions ---The safety and operating instructions should be retained for future reference. Heed Warnings —All warnings on the unit and in the operating instruction...
Page 6 - Table of Contents
Table of Contents 1. Product Overview……….…...……………………………………………………………………………………..………….. 1 1.1 Feature………...…….…….….…………………………………….…………..……………………………………………..1 1.2 Specifications………....………………….………………………………..………….………….…………………………...2 2. Front & Rear Panels………...…….………………………………………..………………………………………………….....
Page 7 - Product Overview and Features
1. Product Overview The Digital Video Recorder is the first true VCR replacement designed particularly for the security industry,seamlessly combining high-resolution video multiplexing and digital recording. The Digital Video Recorder at speeds up to 60/50 fields per second with NTSC/PAL formats and...
Page 8 - Specifications; Power Consumption
Specifications 2 0 ℃ ~+40 ℃ Operating Temperature 320.8mm (L) x 215mm (W) x 100mm (H) Dimension AC100~240V Power Source Yes Watch Dog Timer Built-in real time clock Timer Front Panel Keypad User Input Device Menu Driven User Interface On screen display setup Setup By Date/Time or Event or Segment Pl...
Page 9 - Front Panel Keypads; LOCK; KEY
20 10 9 12 11 13 14 16 21 19 18 17 Front Panel Keypads 1 4 3 2. Front Panel Keypads 15 22 2 1 4 3 5 6 8 7 ~ LOCK : Press and hold the LOCK button over 3 seconds to lock/unlock the function keys of the front panel. This function is used to avoid unexpected contact with the panel. 7 6 BUZZER : Press t...
Page 11 - Audio input for recording.; AUDIO; Back Panel Connections; POWER
MUX MAIN MONITOR IN Back Panel Connections Audio IN : Audio input for recording. Audio OUT : These two audio outputs can be set to “Enable” or “Disable” in Setup Menu. The operation of audio out is as follows: When in recording or standby mode, the out of SW1 is connected to Audio IN. Playback Audio...
Page 12 - MONITOR; Video output BNC connector connected to main monitor.
VIDEO IN : The BNC connectors of video input enables the system to receive the signals from each camera through the 75 ohm coaxial cables. VIDEO IN /Output VIDEO OUT(1~2) : Connect the other devices with four cameras to the other devices. MUX MAIN MONITOR: Video input BNC connector, connected to mul...
Page 13 - Connect D-Sub 9 pins connector to RS232 ports for remote control; Cascade multi Digital Video Recorder.
RS232 RS232 connector : Connect D-Sub 9 pins connector to RS232 ports for remote control 8 Back Panel Connections 7 RS485 RS485 connector : Cascade multi Digital Video Recorder. 9 10 FAN: Cooling FAN.
Page 14 - Main Monitor; The main monitor is connected to the VIDEO OUT 1 BNC connector.; System Connection
MUX MAIN MONITOR IN 4.1 One Camera Connection. (1 ) :Video out : The Camera Video Output is connected to the Video In at the rear panel. Main Monitor (2 ) : Audio Out: The camera audio output is connected to the audio input terminal at the rear panel. (3) : System Main Monitor Output : The main moni...
Page 15 - This connects to the VIDEO IN connector at the rear panel.; Multiplexer; VCR IN; Please set the Multiplexer item to ON . (NORMAL RECORD SETTING MENU)
MUX MAIN MONITOR IN (1): Multiplexer VCR Out : This connects to the VIDEO IN connector at the rear panel. (2) :Multiplexer VCR In : This connects to the VIDEO OUT 1 connector at the rear panel. (3) :Multiplexer Main Monitor Output: This connects to the MUX. MAIN MONITORIN IN connector at the rear pa...
Page 16 - Quad; This connects to the VIDEO INPUT connector at the rear panel.
MUX MAIN MONITOR IN 4.3 Quad Connection. ( Quad with VCR in VCR out connector) Main Monitor Quad (1): Quad VCR Out: This connects to the VIDEO INPUT connector at the rear panel. (2) : Quad VCR In: This connects to the VIDEO OUTPUT connector at the rear panel. (3) : Quad Main Monitor Out: This connec...
Page 17 - VIDEO OUT
MUX MAIN MONITOR IN 4.4 Quad connection. ( Quad without VCR in VCR out connector) Main Monitor (1): Quad Video Out ( to Video Recorder): This connects to the VIDEO INPUT connector at the rear panel. (2): System Main Monitor Output: Connect the MAIN MONITOR connector to the main monitor. System Conne...
Page 18 - INSTALLATION; The detail connection is described in SYSTEM CONNECTION; MENU
INSTALLATION 12 (1) Insert a HDD (IDE) for Video Storage The HDD should be set as MASTER.( Normally the default setting of HDD is Master) Notice: After the hard disk case is inserted into the hard disk tray, be sure to Turn the tray key in lock position. Otherwise, hard disk will not be detected and...
Page 20 - Current date; CLOCK/LANGUAGE SETTING MENU; : Press or to move the cursor to the left or right
MENU 14 In CLOCK/LANGUAGE SETTING MENU , we SET (1) DATE : Current date Year: 2000 ~ 2099 Month: 01~ 12 Date: 01~31 (2) TIME : Current time Hour: 00 ~ 23 Minute : 00 ~ 59 Second: 00 ~ 59 (3) MENU LANGUAGE: ENGLISH CLOCK/LANGUAGE SETTING MENU DATE TIME MENU LANGUAGE : 2003/04/24 TUE: 13:01:02 : ENGLI...
Page 21 - DAYLIGHT SETTING MENU; ” Use the arrows to set the present week
MENU 15 6.2 DAYLIGHT SETTING MENU DAYLIGHT SETTING MENU DAYLIGHT SAVING: OFF START ON JAN 1ST MON FROM 00:00 TO 00:00 END ON JAN 1ST MON FROM 00:00 TO 00:00 In DAYLIGHT SETTING MENU , we define: (1) DAYLIGHT SAVING: Select “ON” or “OFF” while the daylight saving time function is enabled or not. (2) ...
Page 22 - TIMER SETTING MENU; This selects the day for the timer .Records each day’s schedule.; In TIMER SETTING MENU, we define
MENU 6.3 TIMER SETTING MENU TIMER SETTING MENU WEEK START STOP SPEED QUALITY SET SUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00...
Page 24 - In NORMAL RECORDING MENU, we define; Recording Speed; NORMAL RECORD SETTING MENU
MENU 18 NORMAL RECORD SETTING MENU SPEED QUALITY MULTIPLEXER DISK FULL 002 HR STANDARDOFFREWRITE :::: In NORMAL RECORDING MENU, we define (1) SPEED : Recording Speed The user can select the recording speed from 2/3 (NSC/PAL) HR to 960 HR. (2) QUALITY: Picture QualityThere are six quality levels for ...
Page 26 - In ALARM RECORDING MENU, we define; Records when alarm occurs.; Select the Recording picture quality when alarm occurs.; ALARM RECORD SETTING MENU
In ALARM RECORDING MENU, we define (1) ALARM OPERATION : ON : Records when alarm occurs. OFF : Does not record when alarm occurs. (2) RECORDING SPEED : The recording speed in alarm duration. The max. recording speed is 2/3 (NTSC/PAL) HR. The min. recording speed is 960 HR. (3) RECORDING QUALITY : Se...
Page 28 - COIL
MENU Note: 22 (a.) Alarm out To external equipment 8 2 1 9 COIL
Page 29 - RELAY
MENU Normally Closed Connection (use pin # 13 and # 12) 8 2 1 15 9 COIL RELAY To external equipment 23
Page 30 - Alarm in; There is 1 alarm sensor in for 1 channel and 1 alarm reset in, the
MENU Alarm in There is one alarm input. Please connect the alarm input in the same sequence as thecamera input BNC. When alarm signal comes in, the Digital Video Recorder will do the following: 1. Display Alarm Message 2. Turn on the buzzer if the buzzer setting is on. The ALARM in can be selected a...
Page 31 - ON, the buzzer will sound when the alarm occurs.; BUZZER SETTING MENU
BUZZER SETTING MENU BUZZER ALARM –IN RECORD -IN DISK FULL VIDEO LOSS TIMER In BUZZER SETTING MENU, we SET the buzzer ON/OFF under the following conditions: (1) BUZZER : ENABLE: Turns the buzzer on. DISABLE: Turns the buzzer off. User can press Enter button to enable/disable in Record/Playback mode ....
Page 32 - ARCHIVE SETTING MENU; ON
MENU ARCHIVE SETTING MENU PICTURE SIZETIME STAMPTIME STAMP POSWATER MARKWATER MARK POSMULTIPLEXER 720x576ONBOTTOMONBOTTOMNONE :::::: 6.7 ARCHIVE SETTING MENU (1) PICTURE SIZE : Selects picture size for copying image to CF card Big size:720x576 Small size:352x288 (2) TIME STAMP : ON : The time stamp ...
Page 33 - There are two ID code for the Digital video recorder : 001 or 002; In the RS232/RS485 SETTING MENU, we define
MENU (1) RS232/RS485: Choose RS232 or RS485 for activated. (2) RS232/RS485 ID: This entry is used to assign each device with its own ID code, when more than on unit is used in one system through RS232/RS485. There are two ID code for the Digital video recorder : 001 or 002 (3) BAUD RATE: There are 6...
Page 34 - SYSTEM SETTING MENU
MENU (2) PASSWORD ENABLE : YES/NO : User can set the PASSWORD ON or OFF to enter the system setting menu. YES: Selects the PASSWORD to enter the system setting menu . NO: Turns off the PASSWORD to enter the system setting menu. (3) PASSWORD : When selecting YES for PASSWORD ENABLE, to unlock key a p...
Page 35 - YES; YES; Press Yes to Renew HDD and Press ENTER key to Exit.
(5) DISK RENEW : YES/NO : Activates the Renew HDD option. DISK RENEW NO YES Press NO to renew HDD and Press ENTER key to Exit. MENU NO YES DISK RENEW Press Yes to Renew HDD and Press ENTER key to Exit. (6) SYSTEM UPDATE : YES/NO : Updates the system. YES : Copy the update files into Compact Flash ca...
Page 36 - NO: will not format CF card
MENU 30 (8) CF RENEW: Two of modes for choice, YES or NO. NO: will not format CF card YES: will format CF card (7) LOAD DEFAULT : LOAD DEFAULT NO YES Press NO to load default and Exit. LOAD DEFAULT NO YES Press YES to load default value. Left/Right : Press or to move the cursor to the left or right ...
Page 37 - INSTANT RECORDING; Video out; Press Stop key to stop recording.; • Stop key can be activated only in recording mode.; Press Record key to start the recording immediately.; Recording; REC; RECORD
7.1 INSTANT RECORDING When pressed, the pictures being monitored will be recorded in the HDD. •The recording rate and recording quality are set in the Record Set menu • “ REC ” button light up in the operating display Video out Press Stop key to stop recording. • Stop key can be activated only in re...
Page 38 - OFF; Set the recording speed when alarm occurs.
Press MENU key and turn the jog dial to select the ALARM RECORDING SETTING MENU. The monitor image will automatically record when alarm occurs and stop s recording at the end of the alarm duration period. Instant recording and timer recording will stop when an alarm occurs. RECORDING OPERATION: ON: ...
Page 39 - Playing Back; PLAY
8.1 NORMAL PLAYBACK Press the PLAY key to start playing back the stored image/audio from the last SEGMENT. (1) Playback Press the REV.PLAY key to start reverse playing back the stored image/audio from the last segment. Press the STOP key to stop playing back. (3) Fast Forward/Reverse Playback Press ...
Page 40 - Press PAUSE key to freeze the picture.; Press PAUSE key to freeze the playing back picture.; PAUSE
Playing Back (5) Frame/Field advance Forward/Reverse Press PAUSE key to freeze the picture. Turn the jog dial clockwise to advance the still image Frame/Field by Frame/Field . Turn the jog dial counterclockwise to rewind the still image Frame/Field by Frame/Field . The Frame/Field feed speed will in...
Page 41 - Press the SEARCH key to enter the Search menu.; SEARCH
8.2 SEARCH PLAYBACK (1) Segment Search Playback Press the SEARCH key to enter the Search menu. SEARCH MENU BY SEGMENT LISTBY ALARM LISTBY DATA TIME Press the keys to move the cursor to BY SEGMENT LIST and press ENTER key to select file search. SEGMENT SEARCH 1 23 Playing Back SEARCH Press the keys t...
Page 42 - Press SEARCH key to enter the Search menu.
Playing Back (2) Alarm Search Playback Press SEARCH key to enter the Search menu. Press the keys to move the cursor to BY ALARM LIST and press ENTER key to select alarm search. ALARM SEARCH 123 Press the keys to move the cursor to select the alarm image to be played back.When the selection list is f...
Page 43 - start playing back from the nearest set time automatically.
Playing Back (3) Date/Time Search Playback Press SEARCH key to enter the Search menu. Press the keys to move the cursor to BY DATE/TIME and press ENTER key to select file search. DATE/TIME SEARCH YEAR/MM/DD HH:MM:SS2002 04 24 19 03 35 SEARCH Notice: If there is no image stored in the date/time speci...
Page 44 - COPY; Press the PAUSE key to freeze the picture.; Copied images are stored as a single picture.
COPY Insert a Compact Flash card into the Compact Flash slot on the front panel. When inserting the Compact Flash card, make sure that the direction of insertion is correct. Press the PAUSE key to freeze the picture. Turn the jog dial clockwise or counterclockwise to move to your desired image of ch...
Page 45 - COPY TO MOVIE FILE
COPY Press COPY key and then the copy menu appears. COPY 39 Press the PLAY key to start playing back. PLAY PLAY Press PLAY key to continue Copy Movie File. COPY TO MOVIE FILE Press COPY Press PLAYPress PAUSEPress SEARCHPress STOP To Step CopyTo Continue CopyTo Stop ContinueTo End CopyTo End Play 9.2...
Page 46 - Copied images are stored as a movie picture.
COPY 40 Press the PAUSE key to stop continue copy. PAUSE Press STOP key to end play. STOP Notice: Copied images are stored as a movie picture. Copied files are saved as .MOV file.Use QuickTime to play the retrieved .MOV files. You may download QuickTime at www.apple.com . The playback version for Qu...
Page 47 - Interface Specifications; Transmission setting; The pin assignment of the 9-pin D-SUB connector; HOST; The default setting from the factory is 9600 baud.
Interface Specifications RS232 10.1 Transmission setting The pin assignment of the 9-pin D-SUB connector PIN # NAME PIN # NAME 1 NOT CONNECTED 1 NOT CONNECTED 2 TXD 2 RXD 3 RXD 3 TXD 4 NOT CONNECTED 4 NOT CONNECTED 5 GROUND 5 GROUND 6 NOT CONNECTED 6 NOT CONNECTED 7 NOT CONNECTED 7 NOT CONNECTED 8 N...
Page 51 - Remote Controller
Remote Controller Figure 1 45 (Optional) 11. Remote Controller The remote controller is an accessory to enhance the handy operations of digital video recorder (Figure 1). You can do all the settings and operations by the remote controller. The effective distance is up to 10 meters without any obstac...
Page 55 - EverFocus Electronics Corp.; FAX; EverFocus
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chi, Taipei, TaiwanTEL : 886-2-26982334 FAX : 886-2-26982380 USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A.TEL : 1-626-844-8888 FAX : 1-626-844-8838 Toll free : 1-888-383-6287 or 1-888-EV-FOCUS Japan Off...
