Everdure LAFLPBM - User Manual
Everdure LAFLPBM Heater – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The heater must NOT be BUILT IN.; operationof the heater.; 50mm clear of sidewalls.; This appliance has been fully function tested prior to packaging.
- Page 3 – IJ
- Page 5 – Fan Switch; MediumlHigh; positions, which provides three heat settings.
- Page 6 – IGNITION; SWITCH OFF; will return it to the fully up position.
- Page 7 – NEAR; MODEL; MIN. ROOM SIZE PER MODEL
- Page 9 – REMEDY; OFFICEHOURSBETWEEN8am; Page
- Page 11 – SERIAL; SHRIRO AUSTRALIA PTY. LIMITED
A'
EVERDURE FINELINE
FLUELESS RADIANT CONVECTION
GAS SPACE REA TER
MODELS
BRIGADIER
-
3725, COMMANDER
-
3621,
CRUSADER
-
3518, LANCER
-
2415
Operating and Maintenance Instructions
Australian
Made
By
SHRIRO AUSTRALIA PTY. LIMITED
EVERDURE DIVISION.
101 SHEFFIELD ROAD, WELSHPOOL, WESTERN AUSTRALIA
TELEPHONE: 1300 766 066
OFFICEHOURSBET\VEEN8am
-
4:30pm WST (Perth)
SHA 0480
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The Everdure Fineline gas space heaters are described as manually operated, portable, flue less radiant convection heaters for use with Natural gas or Liquid Petroleum gas. The heater is supplied with an approved flexible hose. A label is attached to the rear of the heater stating the type of gas fo...
~ - , . . .c' . -" .,' MODEL BRIGADIER 3725 A IT IJ ro <D L(') ~ ELECTRIC LEAD 285 GAS CONNECTION CONTROL BOX (Shown with lid open) Fig. 1 Page 2 MODEL 'A' NUMBER OF TILES BRIGADIER 796 7 COMMANDER 732 6 CRUSADER 668 5 LANCER 604 4
. ~ :-r. -+ MANUAL IGNITION The heater may be manually lit by opening the dress guard (see Cleaning) and while holding downthe ignition button, apply a lighted longreach match or taper to the pilot. The ignition button needs to be held down for 20 seconds to allow the valve to lock in. Close up the ...
